Stealth Cam STC-GMAX32V User manual

STC-GMAX32V
Instruction Manual
R0

Page 2
To ensure the product is being utilized to its full potential, we recommend checking
our website for new product updates. If your camera is having an issue, please check
our website to determine you are using the latest rmware or software version.
Notice
TECHNICAL SUPPORT
EMAIL:
[email protected]
Please allow 48 hours for email
response.
GSM, LLC
P.O. Box 535189
Grand Prairie, TX 75053-9504
CUSTOMER SERVICE
CONTACT & HOURS
Toll Free: 877-269-8490
CALL CENTER HOURS
Mon – Fri / 8 AM – 5 PM (CST)
WEBSITE
www.stealthcam.com
Contact Us

Page 3
Table of Contents
About Your Camera 4
Quick Setup Guide 5
Camera Overview 6
Camera Setup 8
Camera Conguration 9
Viewing and Deleting Images 11
Camera Setup 12
Advanced Settings 14
Frequently Asked Questions 16
Camera Care 17
FCC COMPLIANCE 18
Limited Warranty Information 19

Page 4
About Your Camera
100 Foot Detection and Flash Range
See farther with long-distance PIR sensor and LEDs.
0.4 Second Trigger Speed
Never miss a shot with lightning fast 0.4 second trigger speed.
Intuitive Menu
Newly designed inuitive menu alllows changing settings with incred-
ible ease.
Burst Rapid-Fire Mode
Rapid-re Burst Mode, multiple exposures per triggering.
33 IR LEDs
Perfectly illuminate your nighttime photos with 33 IR LED lights.

Page 5
Quick Setup Guide
Insert Batteries and SD Card
Install 8 AA batteries and a class 10 SD card into camera.
Mount Camera
Mount the camera at the desired location using the strap
mount, Python Lock cable, Articulating Ball Joint Mount, or
other desired mounting mechanism. Position the camera so
that it does not face East or West directly as the rising and
setting of the sun can cause false positive triggers.
Activate Camera
Camera comes with our most popular settings as default, or
customize your conguration and place in desired vantage
point to start capturing photos of game.

Page 6
Camera Overview
Power Switch
Enter/Exit
Capture Gallery
Directional
Arrows
Menu
Enter

Page 7
12V Aux
Power Port
Universal
¼ - 20 thread
Python Cable
Lock
Strap Mounts

Page 8
Camera Setup
Battery Installation
Battery pane is located on right side of unit, insert 8 AA batteries
into camera, being careful to match the orientation marked on your
camera. After batteries are inserted, power on camera to begin
normal use.
SD Card Installation
SD card slot is located on the left
side of the camera. Insert SD card
with the label facing you. Only
minimal resistance should be felt
as card is inserted and a click when
the card is fully inserted.
SD

Page 9
Main Menu
Camera Setup
Advanced Settings
MENU ENTER
Back OK
Camera Conguration
The settings on your camera are broken down into two sections Camera
Settings and Advanced Setup. Use the directional arrows to highlight the
section you wish to edit, and press Enter to enter into the menu. Settings
available in each section detailed ahead.
To access camera conguration, press the Menu button on your camera. When
you are nished adjusting camera settings, press Menu once again to return
the camera to an active state.
Name Type Quality Timeout
Delay Detail
QSET 1 Photo 8 MP 30 sec 3 Photos
QSET 2 Photo 8 MP 30 sec 1 Photo
QSET 3 Video 720P 30 sec 10 sec video
To switch between QSETs, press the left and right directional arrows after the
camera is powered on.

Page 10
The Camera Setup &Advaned Settings sections in your camera
allows you to customize every setting to t your exact needs. To begin,
press the Menu button on the camera.
Once inside the settings menu, use the Up and Down arrows to scroll
through the di󰀨erent settings. To change a setting that is highlighted,
press the Enter key and the options for the setting will be displayed. At
this point use the Up and Down arrows to change the setting. When
nished press the Enter button to save the change or press Menu to
cancel change.
When you are nished conguring your camera’s settings, press the
Menu button to return your camera to an active state.
Camera Conguration