Steel mate PTS400EX-F User manual

PRI0812/A

Reverse Light
12V

Suggested sensor spacing is 45cm apart. On some vehicles this is
unachievable due to the number plate location or bumper design. This
will mean the distance between the centre two sensors will be greater
(see illustration L2) the kit will still function, however the systems
detection of narrow objects i.e. posts will be reduced.
2Changing the sensor head angle.
Fig.2
Fig.5
Fig.4
Fig.6
Fig.7
When colour coding the sensor heads it is
advisabletopaint the heads in two parts to achieve
the best finish. When the paint is dry remove
excess paint from the silicone then clip back
together.
Fig.3
Fig.1
NOTE: For sensor colour coding procedure please refer to Fig.5

13 14
Make sure the size of hole saw
packed in the matches the
diameter of the sensors before
drilling any holes.

15
8
16
7

20
Optional Optional
FRONT FRONT