Steelcraft AGILE TWIN SH819 Series Installation and operation manual

AGILE TWIN
TRAVEL SYSTEM STROLLER
www.britax.com.au
Series SH819
Suitable for use with the Steelcraft Infant Carrier
(Infant Carrier sold separately)
IMPORTANT: KEEP THIS BOOKLET IN A SAFE PLACE FOR FUTURE REFERENCE.
Now comes with 2 child trays
for snacks and drinks

Stroller Important Notes & Warnings..............................................................4-5
Manual Handling Techniques................................................................ .................6
Stroller Parts List.......................................................................................................7-8
Assembled Stroller Parts List..................................................................................9
STROLLER ASSEMBLY
1. Opening the stroller frame..........................................................................10-12
2. Attaching the front and rear wheels..............................................................13
3. Attaching the canopies................................................................................14-17
4. Attaching the child trays..............................................................................18-19
5. Attaching the head pillow and shoulder pads...........................................20
6. Attaching the rain cover......................................................................................21
STROLLER OPERATION
7. Using the brakes.............................................................................................22-23
8. Using the front swivel wheels .........................................................................24
9. Using the canopies........................................................................................25-28
10. Adjusting the pivotal handle.....................................................................29-30
11. Adjusting the backrest.................................................................................31-33
12. Using the harness..........................................................................................34-38
13. Using the tether strap..........................................................................................39
14. Using the storage basket...................................................................................40
15. Using the stroller...................................................................................................41
16. Folding the stroller.........................................................................................42-45
17. Lifting and carrying the stroller.......................................................................46
02
CONTENTS

18. Removing the front and rear wheels.............................................................47
19. Removing the canopies...............................................................................48-51
20. Removing the child trays...................................................................................52
Infant Carrier Warnings and Important Notes.......................................53-54
20. Attaching the Steelcraft infant carrier....................................................55-58
21. Removing the Steelcraft infant carrier....................................................59-60
Care and Maintenance.............................................................................................61
CONTENTS
03

ALWAYS FOLLOW THE MANUFACTURERS INSTRUCTIONS.
READ ALL INSTRUCTIONS CAREFULLY BEFORE ASSEMBLY AND USE
OF THIS STROLLER.
THE CORRECT USE AND MAINTENANCE OF THIS PRODUCT IS
ESSENTIAL.
• USE GREAT CARE WHEN USING THE STROLLER ON STAIRS,
ESCALATORS, TRAVELATORS OR OTHER MOVING SURFACES.
• IT IS RECOMMENDED TO REMOVE THE CHILD FROM THE STROLLER
BEFORE GOING UP OR DOWN STAIRS OR ESCALATORS.
• DO NOT LIFT THE STROLLER BY THE TRAY (Supplied) OR ARM BAR
(Purchased Separately) BECAUSE IT MAY DISENGAGE.
• DO NOT ALLOW CHILDREN TO STAND ON THE SEAT.
• DO NOT HANG BAGS OR GOODS FROM THE HANDLE AS THIS
COULD CAUSE THE STROLLER TO TIP OVER.
• DO NOT LEAVE THE STROLLER AND ITS ACCESSORIES NEAR AN
OPEN FIRE OR EXPOSED FLAME.
• DO NOT PLACE MORE THAN 6 KG IN THE BASKET, OR 1KG IN THE
CANOPY POCKET (IF SUPPLIED).
IMPORTANT NOTES:
04
IMPORTANT NOTES

WARNINGS: TO AVOID INJURY OR DEATH:
ALWAYS APPLY THE BRAKES WHENEVER THE STROLLER IS
STATIONARY.
• DO NOT LEAVE CHILDREN UNATTENDED.
• SECURE THE CHILD IN THE HARNESS AT ALL TIMES.
• DO NOT CARRY EXTRA CHILDREN OR BAGS ON THIS STROLLER.
• MAKE SURE CHILDREN ARE CLEAR OF ANY MOVING PARTS IF YOU
ADJUST THE STROLLER.
• DO NOT USE ANY ACCESSORIES OTHER THAN THOSE APPROVED
FOR USE WITH THIS STROLLER BY BRITAX.
• IT IS UNSAFE TO USE ACCESSORIES NOT APPROVED FOR USE WITH
THIS STROLLER.
• THE MAXIMUM WEIGHT OF THE CHILD IN EACH SEAT IS NOT TO
EXCEED 20 KG.
This CAUTION Symbol is shown at certain steps in
this Instruction Manual to highlight the danger
of being injured by moving parts.
CAUTION
FOR IMPORTANT NOTES AND WARNINGS ON ACCESSORIES -
REFER TO THEIR INDIVIDUAL SECTIONS IN THIS BOOK.
THE MAXIMUM WEIGHT VARIES FOR EACH ACCESSORY.
WARNINGS
05

The SMART lifting technique
This technique can be used to pick up small light loads from low levels.
Size up the Load
• Assess the load (size, shape and weight).
• Assess whether the load needs to be moved;
• Where is it going to be placed” Check that there are no obstructions;
• Assess whether mechanical or human assistance is required.
Move the Load as close to the body as possible
• A load is heavier to lift or carry if it is not close to the body.
• The whole hand should be used to ensure a rm grip.
Always bend your knees
• Maintain balance.
• Keep feet apart and in a comfortable position.
• Minimise lower back bending.
• Bend knees preferable at as large an angle as possible but not at a right
angle - use a semi squat in preference to a full squat.
Raise the load with your legs
• Achieve the lift smoothly and without jerkiness.
• Maintain the normal curvature of the spine to allow the force of the
load to be distributed evenly from the spine to the pelvis.
Turn your feet in the direction that you want to move the load.
• Avoid unnecessary bending, twisting and reaching.
• Change direction by turning your feet and not your back.
• To set the load down, squat down, keep your head up and let your legs
do the work.
Remember to ‘THINK TALL’chest lifted, shoulders relaxed, chin
tucked in and head level.
MANUAL HANDLING TECHNIQUES
06

A 1 x Stroller Frame,
Seats & Basket
B 2 x Canopies
C 2 x Rear Wheels D 2 x Front wheels
E 2 x Car Seat Receivers
for Steelcraft Infant Carrier
F 2 x Child Trays
PARTS LIST
07
R

G 2 x sets of Shoulder pads H 1 x Rain cover
PARTS LIST
08

Canopy window cover
Canopy window
Handle
Front canopy
tube
Canopy
Canopy back ap zipper
Adjustable
handle
button
09
ASSEMBLED STROLLERS PARTS LIST
Frame lock
Sure Lock
release button
Front wheel
swivel lock
Foot
rest
Leg rest
Basket Front leg tube
Folding
straps
Inner seat
Upper seat
Mesh Panel
Front swivel wheels
Rear
wheels
Canopy
frame
sockets

IMPORTANT NOTES:
PLEASE REFER TO PAGE 6 FOR SMART LIFTING TECHNIQUES.
• RELEASE THE STORAGE LATCH WITH DUE CARE AND OPEN THE FRAME.
• WHEN OPENING THE STROLLER, BE AWARE OF THE DANGER OF BEING
INJURED BY MOVING PARTS AND LOCKING DEVICES DURING THE
PROCESS. KEEP ALL HANDS AND LIMBS CLEAR OF THESE PARTS.
• THERE IS POTENTIAL FOR FINGERS OR PARTS OF THE BODY TO BE
INJURED WHEN THE STROLLER IS BEING UNFOLDED, DUE CARE
SHOULD BE EXERCISED.
• KEEP CHILDREN CLEAR OF THE STROLLER WHEN UNFOLDING THE
STROLLER.
• OPEN THE STROLLER SLOWLY AND BE CAREFUL WHERE YOU PLACE
YOUR HANDS.
STROLLER ASSEMBLY
10
1. OPENING THE STROLLER FRAME

1. OPENING THE STROLLER FRAME
A Release the storage latch located on the rear leg.
11
STROLLER ASSEMBLY

12
1. OPENING THE STROLLER FRAME
B Open the frame as shown by the arrow until you hear a‘click’ which
indicates the frame is fully opened and locked.
STROLLER ASSEMBLY

13
A To attach the front swivel wheel assembly, insert the swivel wheel
assembly and push it into the wheel moulding until you hear a ‘click’
which indicates the wheel is locked in.
Check the wheel assembly is fully locked by pulling against it.
B To attach the rear wheels, insert each wheel axle into the moulding
and push in until locked. You should hear a ‘click’ which indicates the
wheel has locked in. Pull on the wheel to make sure it is it is engaged.
Repeat the process if not locked in.
STROLLER ASSEMBLY
2. ATTACHING THE FRONT AND REAR WHEELS

14
STROLLER ASSEMBLY
1
1
2
A1 To attach the canopies, insert the canopy mouldings into the canopy
frame sockets until they connect together.
A2 Locate the straps on the outer sides of each canopy and press the
snap fastener on each strap to the snap fastener on the top of each
outer handle tube.
The sun is very strong. DO NOT LEAVE YOUR CHILD EXPOSED TO THE
SUN. The canopy or hood on this product will not give your child total
protection from the harmful rays of the sun.
IMPORTANT NOTE:
3. ATTACHING THE CANOPIES

15
STROLLER ASSEMBLY
3. ATTACHING THE CANOPIES
1
2 3
B1 Lift the back ap of each canopy over the stroller handle to reveal
the hook strips along the back edge of the canopy.
B2 Fasten the loop strip on the back of the outer side canopy straps to
the hook strips along the back edge of the canopy.
B3 Thread the inner canopy straps through the guide mould located on
the middle handle tube and fasten the loop strip on the back of the
inner canopy straps to the hook strips along the back edge of the
canopy.

16
STROLLER ASSEMBLY
3. ATTACHING THE CANOPIES
C1 Fasten the hook strip on the inside bottom edge of each canopy
back ap to the loop strip along the top edge of the back rest.
C2 Fasten the hook square on the inside of the canopy back ap to the
loop strip on the side of the stroller.
C3 Fasten the hook strip on the inside edge of the canopy to the loop
strip on the side of the stroller.
1

17
2
3
STROLLER ASSEMBLY
3. ATTACHING THE CANOPIES
C2 & C3

18
STROLLER ASSEMBLY
4. ATTACHING THE CHILD TRAYS
WARNING: WHEN A CHILD IS IN THE STROLLER
KEEP THE CHILD TRAY ATTACHED TO THE ADAPTORS AT
ALL TIMES.
PLEASE NOTE: Each child tray adaptor is marked Left & Right for
correct tting.
AStand beside the stroller and pull the fabric back from the sides of the
the stroller to expose the stroller hinge. Take one child tray adaptor at
a time and insert the adaptor into the stroller hinges as shown. Push
on the adaptor until you hear a‘click’ which indicates the adaptor has
locked in. Pull up on each adaptor to check they have fully locked in.

19
STROLLER ASSEMBLY
4. ATTACHING THE CHILD TRAYS
B Align each child tray onto the adaptors and lower the child tray until
you hear a ‘click’.

20
STROLLER ASSEMBLY
5. ATTACHING THE SHOULDER PADS
A To attach the shoulder pads, release the harness buckles and slide the
shoulder pads onto the shoulder harness.
A