manuals.online logo
Brands
  1. Home
  2. •
  3. Brands
  4. •
  5. Sternberg Lighting
  6. •
  7. Lantern
  8. •
  9. Sternberg Lighting OLD TOWN A850HID WITH 990 FITTER User manual

Sternberg Lighting OLD TOWN A850HID WITH 990 FITTER User manual

OLD TOWN A850HID
WITH 990 FITTER
A850/990 12/13 STERNBERG LIGHTING. ALL RIGHTS RESERVED. PRINTED IN THE USA.
800-621-3376
555 Lawrence Ave., Roselle, IL 60172
[email protected]
www.sternberglighting.com
WARNING: TO AVOID FIRE, SHOCK OR DEATH, TURN OFF AND LOCKOUT POWER BEFORE PERFORMING ANY MAINTENANCE.
CAUTION: THIS FIXTURE MUST BE WIRED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE AND ALL APPLICABLE LOCAL
CODES. PROPER GROUNDING IS REQUIRED. ALL WORK SHOULD BE DONE BY A QUALIFIED ELECTRICIAN.
STEP 1 STEP 2
STEP 3
CUSTOMER INSTALLATION INSTRUCTIONS
Shown with Optional
Twist-Lock
Unpack the base and lens assemblies for the fixture. Handle with
care. Recycle the empty packaging.
Close the fitter and
install the assembly on the
pole.
Make sure the “street side”
label is oriented to the street
or target area.
Fixture should be leveled
before tightening the set
screws.
Note: if the “street side”
label is missing, always
orientate fixture by facing
the casted mark on the cap
towards the street side or
target area.
Connect the source circuit (pole wiring) to the terminal block that is
located in the fitter. Refer to wiring schematic. Be sure to verify ballast
wiring is correct for actual voltage.
“Street Side”
Label
Set Screws
Cast Mark
A850/990 12/13 STERNBERG LIGHTING. ALL RIGHTS RESERVED. PRINTED IN THE USA.
800-621-3376
555 Lawrence Ave., Roselle, IL 60172
[email protected]
www.sternberglighting.com
WARNING: TO AVOID FIRE, SHOCK OR DEATH, TURN OFF AND LOCKOUT POWER BEFORE PERFORMING ANY MAINTENANCE.
CAUTION: THIS FIXTURE MUST BE WIRED IN ACCORDANCE WITH THE NATIONAL ELECTRIC CODE AND ALL APPLICABLE LOCAL
CODES. PROPER GROUNDING IS REQUIRED. ALL WORK SHOULD BE DONE BY A QUALIFIED ELECTRICIAN.
STEP 4
CUSTOMER INSTALLATION INSTRUCTIONS
B
Twist Lock
Place the lens assembly
into top of fitter. Twist it
until locked on the place
inside of ring.
No Twist Lock
Install bug gasket into top
of fitter. Place the lens
assembly into top of fitter.
Tighten set screws to
secure the lens.
Bug Gasket
Set Screws
OLD TOWN A850HID
WITH 990 FITTER

Popular Lantern manuals by other brands

Bouclair 9401440 Assembly instructions

Bouclair

Bouclair 9401440 Assembly instructions

Licatec 24 Series Assembly instruction

Licatec

Licatec 24 Series Assembly instruction

Maxim Lighting Camden 41429WGGO manual

Maxim Lighting

Maxim Lighting Camden 41429WGGO manual

Anslut 020687 operating instructions

Anslut

Anslut 020687 operating instructions

ETC Irideon AR250 instruction manual

ETC

ETC Irideon AR250 instruction manual

Hess Novara OV Installation and operating instructions

Hess

Hess Novara OV Installation and operating instructions

Dextra Verteco 3 Installation

Dextra

Dextra Verteco 3 Installation

Primus 2245 Instructions for use

Primus

Primus 2245 Instructions for use

Leviton T6525 quick start guide

Leviton

Leviton T6525 quick start guide

MELINERA HG00308A Operation and safety notes

MELINERA

MELINERA HG00308A Operation and safety notes

Mobile Power 4059 instruction manual

Mobile Power

Mobile Power 4059 instruction manual

Gama Sonic GS-111PL instruction manual

Gama Sonic

Gama Sonic GS-111PL instruction manual

SensLights SLDY007D user manual

SensLights

SensLights SLDY007D user manual

MiaLuz MZLL0540SW manual

MiaLuz

MiaLuz MZLL0540SW manual

Teknoware VOT100 General information

Teknoware

Teknoware VOT100 General information

Honeywell UniLED quick start guide

Honeywell

Honeywell UniLED quick start guide

Altman Pegasus 6 quick start guide

Altman

Altman Pegasus 6 quick start guide

Touch Of ECO NITEWATCH PRO instructions

Touch Of ECO

Touch Of ECO NITEWATCH PRO instructions

manuals.online logo
manuals.online logoBrands
  • About & Mission
  • Contact us
  • Privacy Policy
  • Terms and Conditions

Copyright 2025 Manuals.Online. All Rights Reserved.