Stiga SP 316 User manual
IT
Motosega a catena per lavori forestali
-
MANUALE DI ISTRUZIONI
ATTENZIONE: prima di usare la macchina, leggere attentamente il presente libretto.
BG
.
BS
-
UPUTSTVO ZA UPOTREBU
CS
-
DA
- BRUGSANVISNING
DE
Kettensäge für die Forstarbeit
- GEBRAUCHSANWEISUNG
EL
-
EN
- OPERATOR’S MANUAL
ES
MANUAL DE INSTRUCCIONES -
atentamente el presente manual.
ET
- KASUTUSJUHEND
FI
Moottorisaha metsänhoitoon
- KÄYTTÖOHJEET
FR
Scie à chaîne pour travaux forestiers
-
MANUEL D’UTILISATION
ATTENTION: lire attentivement le manuel avant d’utiliser cette machine.
HR
-
HU
-
LT
-
NAUDOJIMO INSTRUKCIJOS
LV
-
LIETOŠANAS INSTRUKCIJA
MK
NL
- GEBRUIKERSHANDLEIDING
NO
-INSTRUKSJONSBOK
PL
-
PT
Motosserra para trabalhos florestais
-
MANUAL DE INSTRUÇÕES
RO
-
RU
SK
-
SL
-
SR
-
SV
- BRUKSANVISNING
TR
- KULLANIM KILAVUZU
171506147/0 05/2017
SP 316
SP 316 C
ITALIANO -
...................................................................................................
IT
........................................................................... BG
BOSANSKI - Prijevod originalnih uputa
........................................................................................ BS
.......................................................................... CS
DANSK - Oversættelse af den originale brugsanvisning
............................................................... DA
DEUTSCH - Übersetzung der Originalbetriebsanleitung
............................................................... DE
..................................................................... EL
ENGLISH - Translation of the original instruction
.......................................................................... EN
ESPAÑOL - Traducción del Manual Original
................................................................................ ES
..................................................................................... ET
.................................................................................... FI
FRANÇAIS - Traduction de la notice originale
.............................................................................. FR
HRVATSKI - Prijevod originalnih uputa
......................................................................................... HR
........................................................................... HU
............................................................................... LT
................................................................... LV
............................................................... MK
.................................................... NL
........................................................... NO
................................................................................. PL
............................................................................... PT
............................................................................. RO
...................................................................... RU
............................................................... SK
...................................................................................... SL
SRPSKI - Prevod originalnih uputstva
........................................................................................... SR
.................................................................. SV
.................................................................................... TR
1
2
EE
D
B
C
A
E
F
G
H
I
K
J
1
2
8
6
3
4
7
5
Art.N.
- s/n
WA
L
dB
L
Type:
3 4
5 6
78
A
B
C
A
B
C
A
B
C
A
BC
D
9 10
11 12
14
13
A
B
A
C
D
E
F
15 16
17
18
A
B
A
5 cm
B
5 cm
C
D
19
21 22
23 24
20
A
A
A
B
A
B
A
B
27 28
29 30
2625
A
A
B
A
B
A
B
31 32
33 34
35
A
A
B
A
0,5 mm
A
B
36
37
A
B
> 5 mm
A
B
C
D
E
DATI TECNICI SP 316 SP 316 C
Motore [3] Monocilindrico [3] Monocilindrico
Cilindrata 330,1 30,1
Potenza 0,85 0,85
3000 ± 300 3000 ± 300
12000 12000
Capacità del serbatoio carburante 3215 215
Capacità del serbatoio dell’olio 3170 170
540 540
50 : 1 = 2% 50 : 1 = 2%
Lunghezza di taglio
Spessore catena
Denti / passo del pignone catena 6 / 0,375” 8 / 0,25”
22,86 20,32
Candela
CHAMPION RY4C /
TORCH CMR6A /
CDK CMR6A
CHAMPION RY4C /
TORCH CMR6A /
CDK CMR6A
Peso (con serbatoio vuoto, senza barra
3,4 3,4
Lunghezza 380 380
Larghezza 240 240
Altezza 235 235
Livello di pressione sonora (in base alla
3
3
108,7
3
108,7
3
Livello di potenza sonora garantito 112 112
-
pugnatura anteriore (in base alla ISO
2
2
7
1,5
7
1,5
-
pugnatura posteriore (in base alla ISO
2
2
7,17
1,5
7,17
1,5
(*) ATTENZIONE! Il valore delle vibrazioni può variare in funzione dell’utilizzo della macchina e del suo allestimento
ed essere superiore a quello indicato. É necessario stabilire le misure di sicurezza a protezione dell’utilizzatore che
devono basarsi sulla stima del carico generato dalle vibrazioni nelle condizioni reali di utilizzo. A tale proposito
devono essere prese in considerazione tutte le fasi del ciclo di funzionamento quali ad esempio, lo spegnimento o il
funzionamento a vuoto.
TABELLA PER LA CORRETTA COMBINAZIONE DI BARRA E CATENA (Cap. 16)
PASSO BARRA CATENA MODELLO
Pollici
Lunghezza:
Larghezza
scanalatura:
Modello
Modello
SP 316 SP 316 C
3/8” 0,050” / 1,27 120SDEA041 -
3/8” 14” / 35 0,050” / 1,27 140SDEA041 -
1/4” 0,050” / 1,27 AT12-50 E1-25AP064T -
[1]
[2]
[33]
[37]
[40]
[1]
[2] Motor
[5] Snaga
[8] Kapacitet rezervoara za gorivo
snazi
[13] Debljina lanca
[20] Širina
[21] Visina
[22]
[23] Merna nesigurnost
[24]
[32] TABLICA ZA ISPRAVNO
KOMBINIRANJE VODILICA I LANCA
[33] KORAK
[34] VODILICA LANCA
[35] LANAC
[36] MODEL
[40] Model
varirati u zavisnosti od upotrebe
od navedene. Neophodno je utvrditi
upotrebe. U tu svrhu treba uzeti u obzir sve
[1]
[2] Motor
[36] MODEL
[37] Palce
[40] Model
[1]
[2] Motor
[12] Klippelængde
[16] Tændrør
[18] Mål
[20] Bredde
[21] Højde
[26] Vibrationer overført til hånden på
forreste håndtag (i henhold til ISO
[27] Vibrationer overført til hånden på
bagerste håndtag (i henhold til ISO
[32] TABEL TIL KORREKT
KOMBINATION AF SVÆRD OG
[33] MELLEMRUM
[34] SVÆRD
[35] KÆDE
[36] MODEL
[40] Model
brug. I denne forbindelse er det nødvendigt
[1]
[2] Motor
[5] Leistung
[6] Leerlaufdrehzahl
[12] Schnittlänge
[14] Zähne / Teilung des Kettenrads
[20] Breite
[25] Garantierter Schallleistungspegel
[32] TABELLE FÜR DIE KORREKTE
KOMBINATION VON SCHWERT
[33] GLIEDLÄNGE
[34] SCHWERT
[35] KETTE
[36] MODELLE
[37] Zoll
[40] Modelle
auf einer Abschätzung der Belastung durch
Benutzungsbedingungen beruhen (hierbei
eingeschaltet ist, aber ohne Belastung
[1]
[3]
[5]
[15]
[16]
[17]
[21]
[22]
[40]
[1]
[2] Engine
[6] Idle RPM
[12] Cutting length
[13] Chain gauge
[14] Chain pinion teeth / pitch
[20] Width
[21] Height
[22] Sound pressure level (according to
front handle (according to ISO
on rear handle (according to ISO
[32] CORRECT BAR AND CHAIN
[33] PITCH
[34] BAR
[35] CHAIN
[36] MODEL
[37] Inches
[40] Model
in real usage conditions. In this regard,
[1]
[2] Motor
[4] Cilindrada
[5] Potencia
[8] Capacidad del depósito carburante
potencia
[12] Longitud de corte
[13] Espesor de la cadena
[14] Dientes / paso del piñón cadena
[20] Anchura
[21] Altura
[25] Nivel de potencia sonora garantizado
[32] TABLA PARA LA CORRECTA
COMBINACIÓN DE BARRA Y
[33] PASO
[34] BARRA
[35] CADENA
[36] MODELO
[37] Pulgadas
[40] Modelo
al indicado. Se aconseja establecer las
la carga generada por las vibraciones
en las condiciones reales de uso.
consideración todas las fases del ciclo
[1]
[2] Mootor
[20] Laius
[32] SAEKETI JA -PLAADI
KOMBINATSIOONIDE TABEL (16.
[33] SAMM
[34] SAELATT
[35] KETT
[36] MUDELIL
[37] Tolli
[40] Mudelil
[1]
[2] Moottori
[4] Tilavuus
[5] Teho
[22] Äänenpaineen taso (ISO
22868:2011
[24] Mitattu äänitehotaso (ISO
22868:2011
[25] Taattu äänitehotaso
22867:2011
(ISO 22867:2011
[32] TAULUKKO TERÄLEVYN JA
[33] KULKU
[34] TERÄLEVY
[35] KETJU
[36] MALLI
[40] Malli
[1]
[2] Moteur
[5] Puissance
[12] Longueur de coupe
[14] Dents / pas du pignon de chaîne
[16] Bougie
[20] Largeur
[21] Hauteur
[22] Niveau de pression sonore
(selon la
[25] Niveau de puissance sonore garanti
la
[32] TABLEAU DES COMBINAISONS
CORRECTES ENTRE GUIDE-
[33] PAS
[34] GUIDE-CHAÎNE
[35] CHAÎNE
[36] MODÈLE
[37] Pouces
[40] Modèle
de l’utilisateur; ces dernières doivent être
[1]
[2] Motor
[5] Snaga
snazi
[13] Debljina lanca
[18]
[20] Širina
[21] Visina
[23] Mjerna nesigurnost
[27]
[32] TABLICA ZA PRAVILNO
KOMBINIRANJE VODILICE I LANCA
[33] KORAK
[34] VODILICA
[35] LANAC
[36] MODEL
[40] Model
ili rad na prazno.
[1]
[2] Motor
22868:2011
22867:2011
22867:2011
KOMBINÁCIÓK TÁBLÁZATA (16.
[33] LÁNCOSZTÁS
[35] LÁNC
[36] MODEL
[40] Model
[1]
[5] Galia
grandine
[20] Plotis
(pagal „ISO
pagal
pagal
[32] TAISYKLINGO JUOSTOS IR
[34] STRYPAS
[36] MODELIS
[37] Colis
[40] Modelis
[1]
[5] Jauda
jaudas
[16] Svece
[33] SOLIS
[34] SLIEDE
[36] MODELIM
[37] Collas
[40]
[1]
[40]
[1]
[2] Motor
[4] Cilinderinhoud
[12] Lengte van de snit
[16] Bougie
[20] Breedte
[21] Hoogte
(op basis van
[25] Gegarandeerd geluidsniveau
[26] Trillingen overgedragen op de hand
op de voorste handgreep
(op basis
[27] Trillingen overgedragen op de hand
op de achterste handgreep
(op basis
[32] TABEL VOOR DE CORRECTE
COMBINATIE VAN BLAD EN
[33] STAP
[34] BLAD
[35] KETTING
[36] MODEL
[40] Model
en hoger zijn dan de aangegeven
bijvoorbeeld het uitzetten en de onbelaste
[1]
[2] Motor
[5] Ytelse
[7]
[12] Kuttelengde
[14] Tannhjulets tenner / tagger
[16] Tennplugg
[18] Mål
[20] Bredde
(iht. ISO
[26] Vibrasjoner overført til hånden
(iht. ISO
[27] Vibrasjoner overført til hånden
(iht. ISO
[32] TABELL FOR RIKTIG
KOMBINASJON AV SVERD OG
[33] MELLOMROM
[34] SVERD
[35] KJEDE
[36] MODELL
[40] Modell
[1]
[5] Moc
KOMBINACJI PROWADNICY I
[33] ROZSTAW
[34] PROWADNICA
[36] MODELU
[37] Cale
[40] Modelu
[1]
[2] Motor
[4] Cilindrada
[5] Potência
[13] Spessore catena
[14] Dentes / distância entre eixos do
pinhão da corrente
[16] Vela
[20] Largura
[21] Altura
[32] TABELA PARA A COMBINAÇÃO
CORRETA DE BARRA E
[33] PASSO
[34] LÂMINA-GUIA
[35] CORRENTE
[36] MODELO
[37] Polegadas
[40] Modelo
vazio.
[1]
[2] Motor
[4] Cilindree
[5] Putere
[8] Capacitate rezervor carburant
[16] Bujie
[32] TABEL PENTRU O ASOCIERE
[33] PAS
[36] MODELUL
[40] Modelul
scop, trebuie luate în considerare toate
în gol.
[1]
[1]
[2] Motor
[4]
SPRÁVNEJ KOMBINÁCIE
[33] ROZSTUP
[34] VODIACA LIŠTA
[36] MODEL
[37] Palce
[40] Model
[1]
[2] Motor
[8] Prostornina rezervoarja za gorivo
[13] Debelina verige
[20] Širina
(glede na
(glede
(glede na ISO
(glede na ISO
[32] TABELA ZA PRAVILNO
[33] KORAK
[34] DROG
[35] VERIGA
[36] MODEL
[37] Palci
[40] Model
glede na uporabo stroja in na njegovo
vibracije v realnih pogojih delovanja.V ta
[1]
[2] Motor
[5] Snaga
[8] Kapacitet rezervoara goriva
snazi
[13] Debljina lanca
[20] Širina
[21] Visina
[23] Merna nesigurnost
[32] TABELA ZA PRAVILNO
[33] KORAK
[35] LANAC
[36] MODEL
[40] Model
varirati u zavisnosti od upotrebe
od navedene. Neophodno je utvrditi
upotrebe. U tu svrhu treba uzeti u obzir sve
[1]
[2] Motor
[11] Bränsleblandning (Bensin:
[16] Tändstift
[20] Bredd
[21]
(enligt ISO
(enligt ISO
handtaget
handtaget
[32] TABELL FÖR RÄTT KOMBINATION
[33] STEG
[34] STÅNG
[35] KEDJA
[36] MODELL
[40] Modell
[1]
[2] Motor
[4] Silindir
[16] Buji
[18] Ebatlar
[33] ADIM
[34] PALA
[36] MODELI
[40] Modeli
EN - 1
1. GENERAL INFORMATION
1.1 HOW TO READ THE MANUAL
NOTE or IMPORTANT These give details
or further information on what has been
previously indicated and aim to prevent damage
to the machine or cause other damage.
The
refer to optional features not available on all
1.2 REFERENCES
1.2.1 Figures
1.2.2 Titles
paragraphs.The title of paragraph “2.1 Training” is
abbreviation chap. or par. and the relevant
WARNING!: READ THE INSTRUCTION BOOKLET THOROUGHLY
BEFORE USING THE MACHINE. Keep for future reference.
EN
INDEX
1. GENERAL INFORMATION ..................................... 1
2. SAFETY REGULATIONS........................................ 2
3. GETTING TO KNOW THE MACHINE..................... 4
.. 4
.................................................... 5
............................. 5
........................................... 5
4. ASSEMBLY ............................................................. 6
................................... 6
. 6
5. CONTROLS............................................................ 7
................................. 7
.................................................... 7
...................................... 7
5.4 Throttle trigger lever ....................................... 7
................................................. 7
.................................. 7
.................................................... 7
6. USING THE MACHINE ........................................... 7
.................................. 8
................................................. 8
6.3 Start-up ..........................................................
........................................................ 10
.......................................... 10
6.6 Advice for operation ..................................... 12
6.7 Stop.............................................................. 12
6.8 After operation.............................................. 12
7. ROUTINE MAINTENANCE................................... 12
...................................... 12
............................ 12
7.3 Refuelling ..................................................... 13
........................ 13
.......... 14
7.6 Cleaning the chain........................................ 14
7.7 Chain catcher............................................... 14
7.8 Machine and bar lubrication holes ............... 14
.............................................. 14
.................... 14
..................................... 14
............................... 14
..................................... 14
.............................. 14
8.5 Starter cable ................................................ 15
8.6 Maintenance of the toothed chain ................ 15
................................ 15
................................ 16
.................................. 16
.............................................................. 16
10. HANDLING AND TRANSPORTATION.................. 16
11. ASSISTANCE AND REPAIRS............................... 17
12. WARRANTY COVERAGE..................................... 17
13. MAINTENANCE TABLE........................................ 17
14. CHAIN MAINTENANCE TABLE............................ 18
15. PROBLEM IDENTIFICATION............................... 18
16. ATTACHMENTS...................................................
Other manuals for SP 316
1
This manual suits for next models
1
Table of contents
Other Stiga Chainsaw manuals
Stiga
Stiga SP 338 User manual
Stiga
Stiga SP 382 User manual
Stiga
Stiga CS 80 Li User manual
Stiga
Stiga SEV 2416 Q User manual
Stiga
Stiga SP 386 User manual
Stiga
Stiga SP 460 User manual
Stiga
Stiga PR 500 Li 48 User manual
Stiga
Stiga ES 1600 User manual
Stiga
Stiga ES 1814 User manual
Stiga
Stiga ES 1814 User manual
Stiga
Stiga Chain-saw User manual
Stiga
Stiga SP 386 User manual
Stiga
Stiga ES 1850 User manual
Stiga
Stiga CS 100 Li 20 A User manual
Stiga
Stiga EA 1800 User manual
Stiga
Stiga SP 386 User manual
Stiga
Stiga SP 386 User manual
Stiga
Stiga A 305 User manual
Stiga
Stiga SEV 2416Q User manual
Stiga
Stiga 7 Series User manual
