Stirling Black STR-PGGC75 User manual

75cm GLASS
GAS COOKTOP
WITH SAFETY TEMPERATURE GLASS

Quick Start Guide
Model Number STR-PGGC75
Gas Burners 5
Warranty 3 Years In Home
Version QSG-V1.0
For more information
please visit www.stirlingappliances.com.au
or call 1300 886 649
IMPORTANT: This gas cooktop must be professionally
installed by a licensed gasfitter/plumber.
Using the cooktop
Step 1: Use an appropriately sized pan for each burner.
Step 2: The control panel at the front of the cooktop has five control knobs, one for
each burner. Each control knob has three marked settings: off, highest and lowest
setting. The small diagram below each knob illustrates which burner it controls.
Step 3: To light a burner, press down the control knob gently and turn it
anticlockwise to the highest setting. Pressing down on the control knob will
commence sparks to all burners. Once the flame is lit, hold the knob down for
approximately 15 seconds to ensure it stays lit once released. Choose the
desired flame level between the highest and lowest settings by continuing to turn
the control knob anticlockwise until the flame is at a suitable level.
IMPORTANT: The operating position MUST be between the highest and
lowest settings.
Step 4: After use, always turn the control knob back to the Off position.
NOTES:
(a) In the event of a burner flame being accidentally extinguished, turn off the
burner control and wait for at least one minute before reigniting it.
(b) You can use matches to light the burners in the event of a power failure.
Consult the full instruction manual for comprehensive installation,
usage and cleaning instructions and important safety advice.
Regulated for: Natural Gas Regulated for: LPG
Inj. ∅
(mm) MJ/hr Gas Pressure
Inj. ∅
(mm)
MJ/hr Gas
Pressure
Auxiliary 0.85 3.6
1.0kPa
0.53 3.5
2.75kPa
Semirapid 1.16 6.5 0.72 6.6
Rapid 1.49 10.8 0.93 11.0
Wok 1.80 14.4 1.07 14.7
Total 41.8 42.4