STOK ST-LA3 User manual

STtiK
SToK A3 Personal Laminator
Instruction Manual
Lamination preserves and protects and allows easy cleaning of valuable documents.
In order to do this the laminator contains moving parts that are not accessible during
normal use. The laminator should ALWAYS be unplugged when not in use to ensure
that it does not become a potential hazard to children and pets'

1. Do not place fingers, hair, loose clothing and jewellery near the paper feed slot as
serious injury may occur.
2. The top of the laminator will become hot during use please do not touch
3. Please keep the machine away from children or pets.
4. Make sure the on /off switch is at the OFF position before plugging in the laminator-
5. Follow allwarnings and instructions marked on the product.
6. Please note cardboard carrier pouches must not be used with this laminator as it
may cause jamming or damage to the laminator
7. Unplug the laminator when not in use or before moving or cleaning.
8. Only clean the laminator by wiping with a dry cloth.
g. Do not place the machine near to any heat source or in a damp environment.
10. lf the power supply cord is damaged it must be replaced by a qualified electrician in
orderto avoid ahazard.
11. The objects to be laminated cannot be metal or plastic objects. Take off any staples
or paper clips.
12. Please do not insert anything into the machine other than laminating films and
suggested items. The machine is only to be used for laminating.
13. Never remove the cover or dismantle the machine, no serviceable parts inside.
Plug the machine into a suitable powgr supply outlet.
Switch toONposition to turn on, the LED will light up in blue and will start heating up.
After 3-5 minutes, the Orange READY LED will light up once the machine has
reached the correct operating temperature. The machine is now ready to use.
Sandwich the document or photo in between the layers of the pouch. Ensure that
there is enough space on each side around your document for better bonding.
Do not use pouches thicker than 250 (2x12Smicrons per side)
When the READY light is on, the pouch can be inserted into the machine until it
engages with the rollers. Never insert a pouch open edge first into the machine.
The pouch will move through the machine automatically and exit at the rear
Turn the laminator OFF after use.
Remove the plug from the power supply.
1.
2.
3
4.
5.
6.
7.

jam release
Pouch entry Ready power led
Since deposits of residue will influence the effectiveness of laminating please clean the
rollers periodically after use. To do this, turn on the laminator as usual but feed A3 paper
into the machine instead of the usual laminating pouches. Any residues will come out
with the paper. Repeat this process several iimes to clean the rollers.
lf the paper laminator cannot be started normally:
o Ensure the machine is plugged in and switched on and that the fuse in the plug is
working correctly.
o Ensure the machine is not jammed.
o lt is possible that the machine has overheated and the thermal safety mechanism has
been triggered. Leave it to cool down for 40 minutes. The Laminator should resume
function afterwards.
o lf a jam occurs, turn off and unplug the laminator, then press the RELEASE button.
This will release the hold on the pouch.

Model number ST-LA3
Voltage 220-240V -50H2
Power Max. 265W
Max Document Thickness 0.6 mm
Max Document Size up to A3 size 297 x420 mm
Warm up Time approx. 3 min
Uapprox.25 cn!/min