Stoneridge SE5000-8 RG User manual

NEW FUNCTIONS IN SE5000-8 RG
• Start and end country reminder
• Border crossing assistance
• Automatic Local Time Adjustment (ALTA)
• Driver Timer Display (DTD)
Please see the driver and company manual for further details.
se5000.com/product-support
Start
If the card has been inserted for 180 minutes or more
and the tachograph has been recording rest activity
for that period, you will be prompted with begin place
START AND END COUNTRY REMINDER
The start and end country reminders are a new function to remind the driver to enter
a start or end country if the card is left in the tachograph during the daily rest.
End
If you set the activity to rest and then turn the ignition
off, you will be prompted to register the end place.
This will also trigger if you change the activity to rest
when you turn the ignition on. Conrm if you wish
to register a begin place, and thereafter conrm the
country.
Please note, the display in the above red box is in English for all languages in SE5000-8 RG.
Please note, the display in the above red box is in English for all languages in SE5000-8 RG.
after you turned the ignition off. Conrm if you wish
to register an end place and thereafter conrm the
country.

If the driver does not conrm the prompt, it will continue
prompting at every standstill until conrmed, as it’s a legal
requirement from 2 February 2022 to conrm a border
crossing.
Settings/Options
The default setting displays the country prompt for
30 seconds, or until the driver conrms or cancels the
reminder. The setting for the function can be changed
with a company or workshop card.
The options are the following:
• OFF (no reminders)
• ON (reminder will be displayed until conrmed or cancelled)
• 30sec (reminder will be displayed for 30 seconds or until
conrmed/cancelled)
• 2min (reminder will be displayed for 2 minutes, or until
conrmed/cancelled)
BORDER CROSSING ASSISTANCE
120 seconds after the GNSS in the tachograph has
detected that the vehicle has crossed a border, the border
cross assistance function will activate.
This will prompt the driver at the rst standstill to conrm
the new country.
There is a new option in the SE5000-8 RG to allow
the tachograph to automatically handle all local time
adjustments.
A new menu local time function, available for all users,
is created with three options.
DRIVER TIMER DISPLAY (DTD)
The Driver Timer Display is a new display to assist the
driver in keeping track of the drive and rest time when
outside of the regular DDS calculation.
To activate the timers, press down/up from the main
display until you reach the DTD, then long press OK
until timers are shown.
To deactivate the function, press down/up from main
display until you reach the DTD, then long press OK until
timers reset and –h— is shown instead of digits.
The left side timer will count down a 4-hour and
30-minute drive period since activation, or count down a
45-minute break, or 30-minute break if the previous break
was a 15-minute break.
The right-side timer will count from 00h00 until 99h59.
AUTOMATIC LOCAL TIME ADJUSTMENT (ALTA)
Please note, the display in the above red boxes are in English for all languages in SE5000-8 RG.
Please note, the display in the above red boxes are in English for all languages in SE5000-8 RG.
• OFF – No adjustment or prompts
• DST – Prompts for daylight saving time. This has been
the standard setting in the SE5000
• ALTA – Automatic adjustment of local time according
to time zone and daylight-saving time