Strongway 46530 User manual

MULTI-USE DUMP CART
OWNER’S MANUAL
WARNING:
Read carefully and understand all ASSEMBLY AND OPERATION
INSTRUCTIONS before operating. Failure to follow the safety rules and other
basic safety precautions may result in serious personal injury.
Item# 46530

Thank you very much for choosing a Strongway product! For future reference, please complete
the owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual
to become familiar with this product before you begin using it.
This cart is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. Do not modify this cart or use it for any application other than
that for which it was designed.
For technical questions please call 1-800-222-5381.
INTENDED USE
Perfect for hauling oversized loads such as firewood, rock, mulch and dirt.
TECHNICAL SPECIFICATIONS
Item
Description
Capacity
Overall maximum 1,200 lbs. load capacity
Maximum 500 lbs. dumping load capacity when cart
is loaded.
Tires
13 inch Pneumatic Tires
Do not inflate the tires to more than 30 PSI.
Construction
Steel frame with poly bed tray
Dimensions
44 x 24 x 24.75
GENERAL SAFETY RULES
WARNING: Read and understand all instructions. Failure to follow all instructions listed
below may result in serious injury.
CAUTION: Do not allow persons to operate or assemble this multi-use dump cart
until they have read this manual and have developed a thorough understanding of how the
multi-use dump cart works.
WARNING: The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur. It must be
understood by the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS
Page of 12
2

IMPORTANT SAFETY CONSIDERATIONS
•Do not exceed loading capacity.
oMaximum load capacity: 1,200 lbs.
oMaximum dumping load capacity: 500 lbs.
•Distribute load over the surface of the tray. Do not load items on the top edges of the tray.
•Do not modify the cart in any way. Unauthorized modification may impair the function and/or
safety and could affect the life of the equipment. There are specific applications for which the
multi-use dump cart was designed.
•This cart is not intended for highway use. Do not exceed 5 mph.
•Do not use this cart for transporting passengers. Do not allow children to use this cart
without supervision. This cart is not a toy.
•Do not inflate the tires to more than 30 PSI. Do not use the cart on surfaces or for
transporting objects that can cause damage to the pneumatic tires.
•Always check of damaged or worn out parts before using the cart. Broken parts will affect
the cart operation. Replace or repair damaged or worn parts immediately.
•Store idle the cart .When cart is not in use, store it in a secure place out of the reach of
children. Inspect it for good working condition prior to storage and before re-use.
Page of 12
3

EXPLODED DRAWING FOR ASSEMBLY
PARTS LIST
Part# Description Qty.
A. Bed Frame 1
B. Poly Liner / Cover 1
C. Front Panel 1
D. Left Panel 1
E. Right Panel 1
F. Back Panel 1
G. Front Axle Assembly 1
H. Rear Axle Assembly 1
I. Front Struts 2
J. Rear Struts 2
K. Wheels 4
L. Handle 1
M. Coupling 1
Page of 12
4

ASSEMBLY
1. Turn the cart bed frame assembly upside down. Use the cardboard from the carton to keep
from scratching or damaging the finish. The front frame is pre-assembled to the cart bed
frame.
2. Unlock the front frame by pulling the handle out and place the rear axle assembly under the
frame to prop it up for easier access.
Attach the front axle assembly to the bed frame using M8x20 carriage bolts (4) M8 flat washers
(4) and M8 lock nuts (4). The bolts should go through the frame first and then the front axle
assembly.
3. Attach the front struts (2) to the bed frame using M8x20 carriage bolts (2), M8 flat washers (2),
and M8 lock nuts (2). Slide the M8x20 carriage bolts through the bed frame first and then through
the struts.
Page of 12
5