Strymon Riverside User manual

QUICK START GUIDE

TOP PANEL FUNCTIONS
GAIN
Toggles between the low or high
gain channel.
PUSH
Toggles between flat or enhanced
midrange frequencies.
LEVEL
Controls the output volume level
when the eect is ON.
TREBLE
Wide-ranging high frequency
active shelf control.
ON
Activates electromechanical relay
for true bypass. Red LED indicates
that the eect is engaged.
DRIVE
Adjusts the amount of
gain applied to the signal.
Continuously adjusts many drive
circuit parameters as you turn
the knob.
BASS
Active shelving/parametric low
frequency control.
FAVORITE
Recalls a single favorite preset
setting. Press and hold to save.
MIDDLE
Parametric mid boost/cut control
with optimized frequency center.

REAR PANEL FUNCTIONS
IN
Mono instrument input.
PRESENCE
Tailors the top end character of the output to match
your amp. Try minus (-) or center in front of an amp.
Try plus (+) when plugging straight into a power amp.
OUT
Mono signal out.
BOOST
Boost Switch Mode - Use an external switch to toggle up to
+6dB of post-boost on/o (default configuration).
Boost input can be used in several ways. See user manual for
additional configurations.
EXP
Volume Pedal Mode – Use a
standard TRS expression pedal to
control of the output volume of the
eect (default configuration).
Expression input can be used in
several ways. See user manual for
additional configurations.
POWER
Use an adapter with the following
rating: 9VDC center negative.
250mA minimum.
Download the full Riverside manual at strymon.net/support/riverside

EXAMPLE SETTINGS
BOOST DRIVE
TRANSPARENT & MILD
FAT DRIVE
DROP TUNE
EDGY
SINGING LEAD

REV B
strymon.net