Style selections 36BV90194-PW07 User manual

1
Questions, problems, missing parts? Before returning to your retailer, call our
customer service department at 1-877-888-8225, 8 a.m. - 8 p.m., EST, Monday - Friday.
ITEM #0729173
MODEL #36BV90194-PW07
VANITY WITH TOP AND MIRROR
Français p. 11
Español p. 21
Style Selections® is a registered trademark
of LF, LLC. All rights reserved.
EB16126

2
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
WARNING:
• Assembly and unpacking requires 2 adults.
CAUTION:
• Before installation, carefully use scissors or utility knife to cut and unwrap all parts.
• Do not try to pry o󰀨 top from vanity. Damage to top or vanity may occur.
SAVE THESE INSTRUCTIONS.

3
PACKAGE CONTENTS
PART DESCRIPTION QUANTITY
AVanity 1
B Top (preassembled to Vanity (A)) 1
CBacksplash 1
D Toe Kick Assembly (preassembled to Vanity (A)) 1
E Mirror 1
C
B
A
E
D

4
HARDWARE CONTENTS (not shown to size)
AA
Metal Anchor
Qty: 2
BB
Screw
Qty: 2
CC
Touch-up Pen
Qty: 1
PREPARATION
Before beginning assembly of product, carefully use scissors or utility knife to cut and unwrap all parts.
Make sure all parts are present. Compare parts with package contents list. If any part is missing or
damaged, do not attempt to assemble the product.
Estimated installation time: 90 minutes (24 hours for adhesive to dry).
Tools required for assembly (not included): Phillips screwdriver, utility knife or scissors, power drill, drill
bit, wall mounting hardware and adhesive.
Helpful tools (not included): Measuring tape, level
&
A
D
VANITY INSTALLATION INSTRUCTIONS
1. Vanity (A) comes fully assembled. However, if
you do not want to keep the preassembled toe kick
assembly (D), carefully rest vanity (A) on its back.
Using a Phillips screwdriver (not included), remove
the 6 preassembled bolts and 2 wood screws
securing the toe kick assembly (D) to vanity (A) and
discard.
1

5
2. For shipping purposes, the handles are attached on
the inside of the door and the drawers. To attach
the door handle to the outside, pull the
preassembled tab to open the door.
Then, using a Phillips screwdriver, remove the
screws and discard the tab. Align the door handle on
the outside, securing from the inside with the
removed screws.
Repeat the above process for the remaining
handles.
2
VANITY INSTALLATION INSTRUCTIONS
3. With the assistance of another person, move vanity
(A) to the desired location. Ensure it ts with all
existing plumbing, and use the preassembled
levelers as needed to stabilize the vanity (A).
3
A

6
4. Once the desired location is chosen, temporarily
move vanity (A) to the side -- with the assistance of
another person -- and clean mounting area. Find
and mark the locations of wall studs at mounting
site, then replace vanity (A) in desired location.
Using proper hardware (not included), drill holes
through the vanity (A) at marked locations and
secure vanity (A) to wall stud with at least one
fastener, such as a wood screw or toggle bolt.
If possible, secure vanity (A) to 2 wall studs for
increased stability.
4
A
VANITY INSTALLATION INSTRUCTIONS
5. To install the backsplash (C), apply adhesive
(not included) to the unpolished back side and
bottom of the backsplash (C). Position backsplash
(C) as shown on top (B) and against the wall.
Clean any excess adhesive before allowing
to dry. Install the faucet and drain set (not included)
according to the manufacturer’s directions.
5
A
C
B
ADHESIVE

7
a b c
6. To adjust the doors forward or backward, change
keyhole slot position as in (a).
To adjust the doors right or left, loosen/tighten the
screws as in (b).
To adjust the doors up or down, adjust bracket
height as in (c).
6
A
VANITY INSTALLATION INSTRUCTIONS
1. Decide on the location for mirror (E) and mark the
wall accordingly. The metal anchors (AA) do not
require a pilot hole, but make sure they are level
and spaced the same distance as the mounting
hangers preassembled on mirror (E) and are
located at the desired height.
Using a Phillips screwdriver (not included), screw
the metal anchors (AA) ush into the wall.
CAUTION: Do not overtighten the metal anchors
(BB).
1
AA
Hardware Used
AA Metal Anchor x 2
MIRROR INSTALLATION INSTRUCTIONS
2. Using a Phillips screwdriver, turn screws (BB)
into metal anchors (AA). Leave screws (BB)
out 3/8 in. from wall to leave enough room for
the screw heads to rest in the slots of the
mounting hangers on mirror (E).
Hardware Used
BB Screw x 2
1
2
AA
BB

8
3. With the assistance of another adult, pick up the
mirror (E) and position it on the wall. Allow mounting
hangers to rest on the exposed portion of the
screws (BB).
3E
F
MIRROR INSTALLATION INSTRUCTIONS
CARE AND MAINTENANCE
• Dust regularly with a soft, non-lint producing cloth or household dusting product.
• You can clean the mirror frame and vanity with a non-abrasive household cleaner. Make sure to
dry the wood immediately with a soft cloth or towel.
• To protect the stone surface, use coasters or trays under liquid vessels/containers, as
this will prevent moisture and chemicals from leaking and staining the stone surface.
Dust regularly using a microber cloth. Wipe up spills and moisture immediately with a dry rag,
carefully blotting to prevent staining of the stone.
• To clean, wipe the stone with warm water and a few drops of mild dish soap. Use a clean
microber cloth to wipe down surface thoroughly. Rinse the surface with clean water and a clean
microber cloth. Stone Soap can also be used; please follow cleaning product instructions.
• The glass can be cleaned using standard household glass cleaning agents.
• Tips for using touch-up pen (CC): For scratches, stroke in direction of scratch; for worn areas,
stroke in direction of wood grain. Rub excess colorant promptly with a soft cloth.

9
1-YEAR LIMITED WARRANTY
The manufacturer warrants this product to be free from manufacturing and material defects for a period of
one year from date of purchase, subject to the following conditions and limitations.
1. Install and operate this item in accordance with the installation and operating
instructions furnished with the product at all times. Any unauthorized repair, alteration, willful abuse,
accident or misuse of the product shall nullify this warranty.
2. This warranty is non-transferable, and is made to the original owner, provided the purchase was
made through an authorized supplier of the product.
3. The warranty is limited to the repair or replacement of part(s) found to be defective in material or
workmanship, provided that such part(s) have been subjected to normal conditions of use and
service, after said defect is conrmed by the manufacturer’s inspection.
4. The manufacturer may, at its discretion, fully discharge all obligations with respect to this warranty by
refunding the wholesale price of the defective part(s).
5. Any installation, labor, construction, transportation or other related costs/expenses arising from
defective part(s), repair, replacement or otherwise of same, will not be covered by this warranty,
nor shall the manufacturer assume responsibility for same.
6. The owner/user assumes all other risks, if any, including the risk of any direct, indirect or
consequential loss or damage arising out of the use, or inability to use the product, except
as provided by law.
7. All other warranties – expressed or implied – with respect to the product, its components and
accessories, or any obligations/liabilities on the part of the manufacturer are hereby expressly
excluded.
8. The manufacturer neither assumes, nor authorizes any third party to assume on its behalf, any other
liabilities with respect to the sale of the product.
9. The warranties as outlined within this document do not apply to non accessories used in conjunction
with the installation of this product.
10. This warranty gives you specic legal rights, and you may also have other rights which vary from
state to state.
This warranty is void if:
a. Care and maintenance instructions are not followed.
b. Any unauthorized alteration, willful abuse, accident, or misuse of the product.
c. You do not have the original receipt of purchase.
IF WARRANTY SERVICE IS NEEDED
Contact the manufacturer by calling the customer service department at 1-877-888-8225, 8 a.m. - 8 p.m.,
EST, Monday - Friday. Make sure to have the warranty, sales receipt, location of purchase and the model
serial number of the product.

10
For replacement parts, call our customer service department at 1-877-888-8225,
8 a.m. - 8 p.m., EST, Monday - Friday.
REPLACEMENT PARTS LIST
PART DESCRIPTION PART #
F Mounting Hangers PH-KHHNKL001
G Door P36BV90194-G
H Small Drawer P36BV90194-H
I Large Drawer P36BV90194-I
J Small Interior Drawer P36BV90194-J
AA Metal Anchor PH-WLRZNC001
BB Screw P36BV90194-BB
CC Touch-up Pen P36BV90194-CC
DD Leveler PH-LVRBLK001
EE Euro Hinge PH-HNGPC35CR95
FF Ball Bearing Drawer Slide PH-DSLPCDS3514
GG Epoxy Roller Drawer Slide PH-DSLBLK003
HH Door Bumper PH-BMPBLK002
II Handle with Short Screws P36BV90194-II
JJ Bolt PH-BLTBLK002
KK Plastic Connector Block PH-PCBBLK001
LL Drawer Stop P36BV90194-LL
J
I
DD
1PC
Door 1PC
PH-LVRBLK001
Leveler
Euro Hinge
PH-HNGPC35CR95
PH-DSLPCDS3514
Drawer Slide 14"
Epoxy Roller
Drawer Slide 14"
PH-DSLBLK003
PH-BMPBLK002
Door Bumper
Backsplash
1PC
1PC
Drawer
Drawer
Handle(With
Bolt)
BOLT
Ø6.3*12mm
PH-BLTBLK002
PH-PCB WHT 001
Plastic Connector Block
4PCS
2PCS
4PCS
2SET
1PC
3PCS
12PCS
6PCS
1PC
AA Touch up pen
Drawer 1PC
1PCS
Drawer stop
补件清单
名称 外观
木器补件
外观
名称 数量
数量
非五金包五金
名称
五金包五金
外观
编号 数量
G
1PC
Door 1PC
PH-LVRBLK001
Leveler
Euro Hinge
PH-HNGPC35CR95
PH-DSLPCDS3514
Drawer Slide 14"
Epoxy Roller
Drawer Slide 14"
PH-DSLBLK003
PH-BMPBLK002
Door Bumper
Backsplash
1PC
1PC
Drawer
Drawer
Handle(With
Bolt)
BOLT
Ø6.3*12mm
PH-BLTBLK002
PH-PCB WHT 001
Plastic Connector Block
4PCS
2PCS
4PCS
2SET
1PC
3PCS
12PCS
6PCS
1PC
AA Touch up pen
Drawer 1PC
1PCS
Drawer stop
补件清单
名称 外观
木器补件
外观
名称 数量
数量
非五金包五金
名称
五金包五金
外观
编号 数量
H
1PC
Door 1PC
PH-LVRBLK001
Leveler
Euro Hinge
PH-HNGPC35CR95
PH-DSLPCDS3514
Drawer Slide 14"
Epoxy Roller
Drawer Slide 14"
PH-DSLBLK003
PH-BMPBLK002
Door Bumper
Backsplash
1PC
1PC
Drawer
Drawer
Handle(With
Bolt)
BOLT
Ø6.3*12mm
PH-BLTBLK002
PH-PCB WHT 001
Plastic Connector Block
4PCS
2PCS
4PCS
2SET
1PC
3PCS
12PCS
6PCS
1PC
AA Touch up pen
Drawer 1PC
1PCS
Drawer stop
补件清单
名称 外观
木器补件
外观
名称 数量
数量
非五金包五金
名称
五金包五金
外观
编号 数量
1PC
Door 1PC
PH-LVRBLK001
Leveler
Euro Hinge
PH-HNGPC35CR95
PH-DSLPCDS3514
Drawer Slide 14"
Epoxy Roller
Drawer Slide 14"
PH-DSLBLK003
PH-BMPBLK002
Door Bumper
Backsplash
1PC
1PC
Drawer
Drawer
Handle(With
Bolt)
BOLT
Ø6.3*12mm
PH-BLTBLK002
PH-PCB WHT 001
Plastic Connector Block
4PCS
2PCS
4PCS
2SET
1PC
3PCS
12PCS
6PCS
1PC
AA Touch up pen
Drawer 1PC
1PCS
Drawer stop
补件清单
名称 外观
木器补件
外观
名称 数量
数量
非五金包五金
名称
五金包五金
外观
编号 数量
1PC
Door 1PC
PH-LVRBLK001
Leveler
Euro Hinge
PH-HNGPC35CR95
PH-DSLPCDS3514
Drawer Slide 14"
Epoxy Roller
Drawer Slide 14"
PH-DSLBLK003
PH-BMPBLK002
Door Bumper
Backsplash
1PC
1PC
Drawer
Drawer
Handle(With
Bolt)
BOLT
Ø6.3*12mm
PH-BLTBLK002
PH-PCB WHT 001
Plastic Connector Block
4PCS
2PCS
4PCS
2SET
1PC
3PCS
12PCS
6PCS
1PC
AA Touch up pen
Drawer 1PC
1PCS
Drawer stop
补件清单
名称 外观
木器补件
外观
名称 数量
数量
非五金包五金
名称
五金包五金
外观
编号 数量
FF
1PC
Door 1PC
PH-LVRBLK001
Leveler
Euro Hinge
PH-HNGPC35CR95
PH-DSLPCDS3514
Drawer Slide 14"
Epoxy Roller
Drawer Slide 14"
PH-DSLBLK003
PH-BMPBLK002
Door Bumper
Backsplash
1PC
1PC
Drawer
Drawer
Handle(With
Bolt)
BOLT
Ø6.3*12mm
PH-BLTBLK002
PH-PCB WHT 001
Plastic Connector Block
4PCS
2PCS
4PCS
2SET
1PC
3PCS
12PCS
6PCS
1PC
AA Touch up pen
Drawer 1PC
1PCS
Drawer stop
补件清单
名称 外观
木器补件
外观
名称 数量
数量
非五金包五金
名称
五金包五金
外观
编号 数量
GG
1PC
Door 1PC
PH-LVRBLK001
Leveler
Euro Hinge
PH-HNGPC35CR95
PH-DSLPCDS3514
Drawer Slide 14"
Epoxy Roller
Drawer Slide 14"
PH-DSLBLK003
PH-BMPBLK002
Door Bumper
Backsplash
1PC
1PC
Drawer
Drawer
Handle(With
Bolt)
BOLT
Ø6.3*12mm
PH-BLTBLK002
PH-PCB WHT 001
Plastic Connector Block
4PCS
2PCS
4PCS
2SET
1PC
3PCS
12PCS
6PCS
1PC
AA Touch up pen
Drawer 1PC
1PCS
Drawer stop
补件清单
名称 外观
木器补件
外观
名称 数量
数量
非五金包五金
名称
五金包五金
外观
编号 数量
EE
1PC
Door 1PC
PH-LVRBLK001
Leveler
Euro Hinge
PH-HNGPC35CR95
PH-DSLPCDS3514
Drawer Slide 14"
Epoxy Roller
Drawer Slide 14"
PH-DSLBLK003
PH-BMPBLK002
Door Bumper
Backsplash
1PC
1PC
Drawer
Drawer
Handle(With
Bolt)
BOLT
Ø6.3*12mm
PH-BLTBLK002
PH-PCB WHT 001
Plastic Connector Block
4PCS
2PCS
4PCS
2SET
1PC
3PCS
12PCS
6PCS
1PC
AA Touch up pen
Drawer 1PC
1PCS
Drawer stop
补件清单
名称 外观
木器补件
外观
名称 数量
数量
非五金包五金
名称
五金包五金
外观
编号 数量
HH
1PC
Door 1PC
PH-LVRBLK001
Leveler
Euro Hinge
PH-HNGPC35CR95
PH-DSLPCDS3514
Drawer Slide 14"
Epoxy Roller
Drawer Slide 14"
PH-DSLBLK003
PH-BMPBLK002
Door Bumper
Backsplash
1PC
1PC
Drawer
Drawer
Handle(With
Bolt)
BOLT
Ø6.3*12mm
PH-BLTBLK002
PH-PCB WHT 001
Plastic Connector Block
4PCS
2PCS
4PCS
2SET
1PC
3PCS
12PCS
6PCS
1PC
AA Touch up pen
Drawer 1PC
1PCS
Drawer stop
补件清单
名称 外观
木器补件
外观
名称 数量
数量
非五金包五金
名称
五金包五金
外观
编号 数量
II
1PC
Door 1PC
PH-LVRBLK001
Leveler
Euro Hinge
PH-HNGPC35CR95
PH-DSLPCDS3514
Drawer Slide 14"
Epoxy Roller
Drawer Slide 14"
PH-DSLBLK003
PH-BMPBLK002
Door Bumper
Backsplash
1PC
1PC
Drawer
Drawer
Handle(With
Bolt)
BOLT
Ø6.3*12mm
PH-BLTBLK002
PH-PCB WHT 001
Plastic Connector Block
4PCS
2PCS
4PCS
2SET
1PC
3PCS
12PCS
6PCS
1PC
AA Touch up pen
Drawer 1PC
1PCS
Drawer stop
补件清单
名称 外观
木器补件
外观
名称 数量
数量
非五金包五金
名称
五金包五金
外观
编号 数量
JJ
1PC
Door 1PC
PH-LVRBLK001
Leveler
Euro Hinge
PH-HNGPC35CR95
PH-DSLPCDS3514
Drawer Slide 14"
Epoxy Roller
Drawer Slide 14"
PH-DSLBLK003
PH-BMPBLK002
Door Bumper
Backsplash
1PC
1PC
Drawer
Drawer
Handle(With
Bolt)
BOLT
Ø6.3*12mm
PH-BLTBLK002
PH-PCB WHT 001
Plastic Connector Block
4PCS
2PCS
4PCS
2SET
1PC
3PCS
12PCS
6PCS
1PC
AA Touch up pen
Drawer 1PC
1PCS
Drawer stop
补件清单
名称 外观
木器补件
外观
名称 数量
数量
非五金包五金
名称
五金包五金
外观
编号 数量
KK
1PC
Door 1PC
PH-LVRBLK001
Leveler
Euro Hinge
PH-HNGPC35CR95
PH-DSLPCDS3514
Drawer Slide 14"
Epoxy Roller
Drawer Slide 14"
PH-DSLBLK003
PH-BMPBLK002
Door Bumper
Backsplash
1PC
1PC
Drawer
Drawer
Handle(With
Bolt)
BOLT
Ø6.3*12mm
PH-BLTBLK002
PH-PCB WHT 001
Plastic Connector Block
4PCS
2PCS
4PCS
2SET
1PC
3PCS
12PCS
6PCS
1PC
AA Touch up pen
Drawer 1PC
1PCS
Drawer stop
补件清单
名称 外观
木器补件
外观
名称 数量
数量
非五金包五金
名称
五金包五金
外观
编号 数量
LL
1PC
Door 1PC
PH-LVRBLK001
Leveler
Euro Hinge
PH-HNGPC35CR95
PH-DSLPCDS3514
Drawer Slide 14"
Epoxy Roller
Drawer Slide 14"
PH-DSLBLK003
PH-BMPBLK002
Door Bumper
Backsplash
1PC
1PC
Drawer
Drawer
Handle(With
Bolt)
BOLT
Ø6.3*12mm
PH-BLTBLK002
PH-PCB WHT 001
Plastic Connector Block
4PCS
2PCS
4PCS
2SET
1PC
3PCS
12PCS
6PCS
1PC
AA Touch up pen
Drawer 1PC
1PCS
Drawer stop
补件清单
名称 外观
木器补件
外观
名称 数量
数量
非五金包五金
名称
五金包五金
外观
编号 数量
BB CC
AA
W3348
F
Printed in China