Style selections NRS2230MV User manual

1
MEDICINE CABINET
ITEM #2550868
MODEL #NRS2230MV
Serial Number Purchase Date
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-877-888-8225, 8 a.m. - 8 p.m., EST, Monday - Sunday.
VR20199
Style Selections is a trademarkof LF, LLC.
All Rights Reserved. ATTACH YOUR RECEIPT HERE
ADJUNTE SU RECIBO AQUÍ
Español p. 12
IS2331

2
TABLE OF CONTENTS
2
Package Contents .......................................................................................................................... 2
Hardware Contents ........................................................................................................................... 3
Safety Information ........................................................................................................................... 4
Preparation ....................................................................................................................................... 4
Assembly or Installation Instructions ............................................................................................. 4-9
Care and Maintenance ..................................................................................................................... 9
Troubleshooting ......................................................................................................................... 10-11
Replacement Parts List .................................................................................................................. 11
PACKAGE CONTENTS
A
B
PART DESCRIPTION QUANTITY
A Cabinet 1
B Door 1
C Side Panel 2
D
PART DESCRIPTION QUANTITY
D Adjustable Shelf 3
E Shelf Clip 6
D
D
E
E
E
C
C
IS2331

3
HARDWARE CONTENTS (shown actual size)
AA
BB DD
Hinge Screw
Qty. 4
Bumper Strip
Qty. 1
CC
Mounting Bracket
Screw
Qty. 4
Hinge with pre-installed
Mounting Bracket
Qty. 2
IS2331

PREPARATION
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install
the product.
• Locate all electrical, plumbing, and gas lines. Cutting any of these may cause serious injury.
• If installing into a material other than drywall or a stud, consult a professional for proper installation.
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Assembly Time: 25 minutes (with assistance of another person)
Tools Required for Assembly (not included): Electric drill with the appropriate drill bit size, Level,
Phillips screwdriver, Measuring tape, Pencil and Circular saw
NOTE: Surface Mount: Use a 3/32 in. drill bit and #10 x 2 in. long pan head wood screws (requires 4 per
cabinet) for direct stud installation. Use a 1/4 in. drill bit and 1/8 in. Molly Bolts sized to the appropriate
wall thickness (requires 4 per cabinet) for drywall installation.
NOTE: Recess Mount: Use a 3/32 in. drill bit and 1-1/4 in. long pan head wood screws (requires 2 per
side) for installation.
4
WARNING
• Before cutting, drilling or hammering into any wall surface, verify the location of electrical, plumbing,
and gas lines.
1. Surface Mount
Attach side panels (C) to sides of cabinet (A) by
removing backing from adhesive strips on side panels,
placing side panels on sides of cabinet and applying
pressure to side panels .
1
A
INSTALLATION INSTRUCTIONS
C
C
IS2331

5
INSTALLATION INSTRUCTIONS
3. Surface Mount
1. LOOSEN the horizontal adjustment (In and Out)
screw on hinge (AA).
2. Slide the hinge (AA) forward.
3. TIGHTEN the horizontal adjustment screw into
place with screw to the rear of the slot.
4. LOOSEN lateral adjustment (In and Out) screw until
screw resists.
3
1
2. Surface Mount
Hold the cabinet (A) at the desired position on wall.
NOTE: Make sure the cabinet is level.
Mark locations on wall through mounting holes in back
of cabinet (A).
Drill holes in the marked spots.
Attach the cabinet (A) to the wall, using mounting
screws (not included) and drywall anchors (not included) .
2
A
2
3
4
AA
AA
AA
IS2331

6
INSTALLATION INSTRUCTIONS
4. Surface Mount
Fasten hinges with mounting brackets (AA) to the
cabinet body (A) using mounting bracket screws (CC).
4
5. Surface Mount
Fasten the door (B) to hinges (AA) using hinge
screws (BB).
NOTE: Do not overtighten hinge screws (BB).
NOTE: For hinge adjustment, please refer to
troubleshooting on page 10.
5
6. Surface Mount
Insert the shelf clips (E) in the desired locations and
place adjustable shelves (D) onto the shelf clips (E).
Apply bumpers (DD) on cabinet body (A) where it
comes in contact with the door (B).
6A
E
B
AA
BB
CC
AAA
IS2331

7
3. Recess Mount
Install the cabinet (A) in the wall, using appropriate
mounting screws (not included) .
3
A
studs or wooden framing
1. Recess Mount
Hold the cabinet (A) at the desired position on wall.
NOTE: Make sure the cabinet is level.
Trace the outline of the cabinet (A) on the wall.
NOTE: The cabinet should be positioned between
two studs. If the cabinet will not be positioned between
two studs, a frame of wood must be constructed in the
wall surrounding the outline of the location of
the cabinet.
1
2. Recess Mount
Cut a hole in the wall along the traced line.
2cut out the outline
of the cabinet
A
outline of the cabinet
INSTALLATION INSTRUCTIONS
IS2331

8
4. Recess Mount
1. LOOSEN the horizontal adjustment (In and Out)
screw on hinge (AA).
2. Slide the hinge (AA) forward.
3. TIGHTEN the horizontal adjustment screw into
place with screw to the rear of the slot.
4. LOOSEN lateral adjustment (In and Out) screw until
screw resists.
4
1
2
3
4
AA
AA
AA
INSTALLATION INSTRUCTIONS
5. Recess Mount
Fasten hinges with mounting brackets (AA) to the
cabinet body (A) using mounting bracket screws (CC).
NOTE: Do not overtighten the mounting bracket
screws (CC).
5
CC
AAA
IS2331

9
INSTALLATION INSTRUCTIONS
CARE AND MAINTENANCE
Cleaning with a dry cloth may be sufcient, but for other stains or marks wipe gently with a damp cloth.
DO NOT use strong detergents or abrasive cleaners; they may damage the surface of the product.
6. Recess Mount
Fasten the door (B) to hinges (AA) using hinge
screws (BB).
NOTE: Do not overtighten the hinge screws (BB).
NOTE: For hinge adjustment, please refer to
troubleshooting on page 10.
6
7. Recess Mount
Insert the shelf clips (E) in the desired locations and
place adjustable shelves (D) onto the shelf clips (E).
Apply bumpers (DD) on cabinet body (A) where it
comes in contact with the door (B).
7A
E
B
AA
BB
IS2331

TROUBLESHOOTING
• Hinge Adjustment, Side to Side door (B) adjustment. We recommend two people.
+
+
-
-
+
-
-
+
10
• Hinge Adjustment, Up and Down door (B) adjustment.
-
+
+
-
+
-
+
• Hinge Adjustment, In and Out door (B) adjustment.
-
+
+
-
+
• NOTE: Fully tighten all hinge and bracket screws.
++
+
Loosen Adjust Tighten
Loosen Adjust Tighten
Loosen Adjust Tighten
IS2331