Style selections LINEN CABINET W178Q04-W User manual

Purchase Date
Questions, problems, missing parts? Before returning to yourretailer, call our customer service
department at 1-877-888-8225, 8 a.m. – 8 p.m., EST, Monday - Friday .
ATTACH YOUR RECEIPT HERE
LINEN CABINET
1
ITEM #0740478
MODEL #LW178Q04-W
Français p. 8
TM
AB17387

A
PACKAGE CONTENTS
2
PART DESCRIPTION QUANTITY
A Left Upper Side Panel 1
B Right Upper Side Panel 1
C 1
D 1
E
Movable Shelf
Bottom Panel
Top Panel
3
F Middle Panel 1
G
Right Lower Side Panel
1
H
Upper Back Panel
1
I 1
Lower Back Panel
J 1
PART DESCRIPTION QUANTITY
L
Front Frame
Front Door Frame
1
M
K
Left Lower Side Panel
1
N
1
O
Left Drawer Side Panel
Right Drawer Side Panel 1
P
1
Q
Drawer Front
1
Drawer Back
1
Drawer Base
H
A
B
J
E
F
E
I
E
Q
M
N
G
C
DK
L
P
O
up
up
up
up

Please read and understand this entire manual before attempting to assemble, operate or install
The assistance of another person may be required to help install this unit.
the product.
(not shown actual size)
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product.
15 minutes
Shelf Support Screw Anchor
3
HARDWARE CONTENTS
SAFETY INFORMATION
PREPARATION
Estimated Assembly Time:
AA BB CC DD EE
Qty. 8 Qty. 2 Qty. 2
WARNING
• Do not load this unit with more than 30 lbs.
• Safely discard all packing material.
• Keep small parts away from children.
•
Use provided hardware to secure furniture to the wall.
FOR SAFE AND PROPER USE TO AVOID TIPPING HAZARD
•
CAUTION
• Take care when moving the product and never drag the pieces cross the floor as this will cause
damage to the joints.
Tools Required for Installation To Wall (not included): Screwdriver, Hammer, Electric Drill, 3/16 in. Drill Bit,
Level and Pencil.
Wood Dowel
(pre-assembled) (pre-assembled)
Locking Nut

L
D
C
C
J
ASSEMBLY INSTRUCTIONS
2
1
4
1. Attach left lower side panel (C) to lower back panel (J) by
inserting the tabs on the left lower side panel (C) into the
slots on the lower back panel (J) and push down until
the left lower side panel (C) slides into place.
Repeat this step for the right lower side panel (D).
2. Attach left lower side panel (C) and right lower side
panel (D) to front door frame (L) by inserting the tabs
on the left lower side panel (C) and right lower side
panel (D) into the slots on the front door frame (L)
and push down until the left lower side panel (C)
and right lower side panel (D) slides into place.
F
3
Arrow
3. Attach middle panel (F) to the assembled unit
and twist the locking nut clockwise to secure in
place.
Note: For all applicable steps, ensure the direction of
locking bolt is parallel when inserted into the nut on
the panel.
Arrow
up
up

up
up
up
up
5
ASSEMBLY INSTRUCTIONS
6
5
4
PP
I
A
A
B
K
F
I
4. Attach left upper side panel (A) to front frame (K) by
inserting the tabs on the left upper side panel (A) into the
slots on the front frame (K) and push down until
the left upper side panel (A) slides into place.
Repeat this step for the right upper side panel (B).
5. Attach left upper side panel (A) and right upper side
panel (B) to upper back panel (I) by inserting the tabs
on the left upper side panel (A) and right upper side
panel (B) into the slots on the upper back panel (I)
and push down until the left upper side panel (A)
and right upper side panel (B) slides into place.
6. Attach the upper unit to bottom unit and twist
locking nut clockwise to secure in place.
Arrow
Arrow

up
up
up
CC BB
Q
O
M
N
P
6
ASSEMBLY INSTRUCTIONS
9
8
7
Anchor x 2
CC
Screw x 2
BB
H
Hardware Used
7. Attach top panel (H) to unit and twist the locking
nut clockwise to secure in place.
8. Attach left drawer side panel (M) and right drawer
side panel (N) to drawer back panel (P). Twist the
locking nut clockwise to secure in place.
Attach drawer front panel (O) to drawer unit.
Twist the locking nut clockwise to secure in place.
9. With the help of another person, move the assembly
unit to desired location. Use a pencil (not included) to mark
the pre-drilled holes on upper back panel (I) onto the wall.
Set assembled unit aside.
Use a 3/16-in. drill bit (not included) to drill 1/4-in. pilot
holes at the marked locations. Insert anchors (CC) into
holes until they are flush with the wall, then move
assembly back into position. Secure item to the wall by
inserting the screws (BB) through upper back panel (I)
and into the anchors (CC).
INSTALLATION TO WALL

E
E
E
G
AA
AA
7
ASSEMBLY INSTRUCTIONS
Hardware Used
AA Shelf Support x 8
10
10. Put bottom panel (G) into unit. Insert shelf support (AA)
into unit. Put movable shelf (E) into unit.
Assembly is now complete.
Note: To adjust the gap between the doors, use a
Phillips screwdriver (not included) on the preassembled
hinges - counterclockwise increases gap, clockwise
will decrease it.
Note: To remove the drawers at any time, press the
lever on the right drawer glide down and the lever on
the left up. Then completely remove the drawer.
CARE AND MAINTENANCE
• Wipe with a soft and dry cloth as needed. Do not use abrasive cleaner.
PART DESCRIPTION PART #PICTURE
AA SH001
BB
Shelf Support
SH002
CC Anchor
Screw
SH003
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-877-888-8225, 8 a.m. - 8 p.m.,
EST, Monday - Friday.
Printed in China

Date d’achat
Des questions, des problèmes, des pièces manquantes? Avant de retourner l’article au détaillant,
appelez notre service à la clientèle au 1 877 888-8225, entre 8 h et 20 h (HNE), du lundi au vendredi.
JOIGNEZ VOTRE REÇU ICI
ARMOIRE À LINGE
8
ARTICLE #0740478
MODÈLE #LW178Q04-W
TM

A
CONTENU DE L’EMBALLAGE
9
PIÈCE DESCRIPTION QUANTITÉ
APanneau latéral
supérieur gauche 1
BPanneau latéral
supérieur droit 1
C1
D1
E
Tablette amovible
Panneau inférieur
Panneau supérieur
3
F Panneau central 1
G
Panneau latéral
inférieur droit
1
H
Panneau arrière supérieur
1
I 1
Panneau arrière inférieur
J 1
PIÈCE DESCRIPTION QUANTITÉ
L
Cadre avant
Cadre de porte avant
1
M
K
Panneau latéral
inférieur gauche
1
N
1
O
Panneau latéral
gauche du tiroir
Panneau latéral
droit du tiroir 1
P
1
Q
Panneau avant du tiroir
1
Panneau arrière du tiroir
1
Base du tiroir
H
A
B
J
E
F
E
I
E
Q
M
N
G
C
DK
L
P
O
haut
haut
haut
haut

Assurez-vous de lire et de comprendre l’intégralité du présent manuel avant de tenter d’assembler,
d’utiliser ou d’installer l’article.
Vous pourriez avoir besoin de l’aide d’une autre personne pour installer cet article.
Avant de commencer l’assemblage de l’article, assurez-vous d’avoir toutes les pièces. Comparez le
contenu de l’emballage avec la liste des pièces et celle de la quincaillerie incluse. S’il y a des pièces
manquantes ou endommagées, ne tentez pas d’assembler l’article.
Taquet Vis Cheville d’ancrage
10
QUINCAILLERIE INCLUSE (non illustrée à la grandeur réelle)
CONSIGNES DE SÉCURITÉ
PRÉPARATION
Temps d’assemblage approximatif : 15 minutes
AA BB CC DD EE
Qté : 8 Qté : 2 Qté : 2
AVERTISSEMENT
• Ne mettez pas une charge de plus de 13,6 kg dans l’armoire.
• Jetez le matériel d’emballage de façon sécuritaire.
• Tenez les petites pièces hors de la portée des enfants.
•
Fixez l’armoire au mur à l’aide de la quincaillerie fournie.
POUR UN USAGE SÉCURITAIRE ET ADÉQUAT AFIN D’ÉVITER LES RISQUES DE RENVERSEMENT
•
ATTENTION
• Lorsque vous déplacez l’article, prenez soin de ne jamais faire glisser les pièces sur le sol afin d’éviter
d’endommager les joints.
Outils nécessaires pour l’installation au mur (non inclus) : tournevis, marteau, perceuse électrique, foret
de 3/16 po, niveau et crayon.
Goujon en bois
(préassemblé) (préassemblé)
Écrou de blocage