Style selections BV-8372 User manual

ITEM #2694520
Serial Number Purchase Date
MODEL #BV-8372
1
VANITY WITH TOP
Questions, problems, missing parts? Before returning to your retailer, call our customer
service department at 1-877-888-8225, 8 a.m. - 8 p.m., EST, Monday - Sunday.You could
also contact us at [e-mail] or visit www.lowespartsplus.com.
ATTACH YOUR RECEIPT HERE
STYLE SELECTIONS and logo design
are trademarks or registered trademarks
of LF, LLC. All rights reserved.
SM20458

2
TABLE OF CONTENTS
Package Contents ..............................................................................................................................2-3
Hardware Contents ................................................................................................................................3
Safety Information ..................................................................................................................................3
Warning ..................................................................................................................................................3
Preparation .............................................................................................................................................3
Tools Required (Not included) ................................................................................................................4
Installation Instructions ........................................................................................................................4-6
Care and Maintenance ..........................................................................................................................6
Warranty ................................................................................................................................................6
Replacement Parts List ........................................................................................................................7
PACKAGE CONTENTS
Carefully check all components for damages and/or missing parts prior to installation. If there are any
damages or if you are missing parts, do not proceed with the installation. Report damages and/or
missing parts immediately to the manufacturer.
B
A

3
PACKAGE CONTENTS
Note: Hardware not shown to size.
HARDWARE CONTENTS
AA
SAFETY INFORMATION
• Keep small parts away from children.
• Some steps are more easily handled with 2 adults.
WARNING
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to assemble
the product.
Estimated Installation Time: 20-30 minutes (24 hours for adhesive to dry).
Tools and materials recommended for installation (not included): saw, hammer, variable speed drill,
tape measure, level, adjustable wrench, stud finder, lag bolts, screwdrivers (Phillips and flathead),
socket and ratchet (for lag bolts), toggle bolts (optional), clear silicone caulk/sealant (do not use
plumber’s putty).
PREPARATION
Please read and understand this entire manual before attempting to assemble, operate or install the
product.
Touch-Up Pen
Qty:1
PART
DESCRIPTION
QUANTITY
A
Vanity
1
B
Vanity Top
1

4
TOOLS REQUIRED (NOT INCLUDED)
INSTALLATION INSTRUCTIONS
Step 1: Install the Vanity Top
1
Phillips
Screwdriver Utility Knife Sealant
Power Drill
With Drill Bit Measuring Tape Hammer
A
B
1. Remove the protection pad from the vanity base (A) and
clean the vanity surface before installation. Apply clear
silicone caulkto the top of vanity. Carefully set vanity top (B)
into position on vanity (A) and firmly press down. It is
important to caulkaround vanity top and vanity to prevent
potential water from seeping into vanity and mildew.

5
INSTALLATION INSTRUCTIONS
2. If the doors preassembled to vanity (A) require
adjustment, follow the below options as needed:
To adjust door up or down, loosen screws (a),
adjust door and retighten screws. To adjust
door left and right, turn screw (b) in or out. To
adjust door in and out, loosen screw (c), adjust
door and retighten screws.
Step 2: Hinge Adjustable for Door Alignment
2
Step 3: Vanity Drawer Removal
3
2
3a. Open the preassembled drawer as far as possible.
3b. Simultaneously press the plastic cards on the
bottom of drawer left side and right side inward.
3c. Once both plastic cards are held in the indicated
position, pull the drawer straight out.
a
b
c
A

6
INSTALLATION INSTRUCTIONS



4

CARE AND MAINTENANCE
• Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product.
•You can clean the vanity with a gentle, non-abrasive household cleaner.
• Make sure to dry the wood immediately with a soft cloth or towel.
• Clean the top with a glass cleaner or other household cleansers that are non-abrasive. Using
abrasive cleansers will damage the surface.
• Tips for using touch-up pen (AA): For scratches, stroke in direction of scratch. Rub off excess
colorant promptly with a soft cloth.
WARRANTY
The manufacturer provides a one-year limited warranty for residential use. The vanity combo will
be free from manufacturing defects, provided the original purchaser resides in or owns the home of
installation, and provided the vanity combo is installed and maintained according to the installation
and maintenance instructions contained within and supplied by the manufacturer. The liability will
be limited to cost of products only. This warranty is in lieu of any other implied or expressed
warranties. This warranty applies only to the original purchaser. This warranty does not apply to
any damage on the product by accident, misuse, or modified, improper installation or by affixing
accessories not produced by the manufacturer. The manufacturer shall not be legally responsible
for incidental, consequential or special damages arising at or in connection with product use or
performance except as may otherwise be accorded by law.
4. In case of uneven floors, floorlevelers are
providedat the bottom of the vanity. If
necessary, adjust floorlevelerby handto
corr tilting and/orlevel doors.
Step 4: Adjustable Level

7
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-877-888-8225, 8 a.m. - 8 p.m.,
EST, Monday - Sunday. You could also contact us at [e-mail] or visit
www.lowespartsplus.com.
B CD E
AA F G H
Printed in Vietnam
STYLE SELECTIONS and logo design are
trademarks or registered trademarks of LF,
LLC. All rights reserved.

ARTÍCULO #2694520
MODELO #BV-8372
8
TOCADOR CON CUBIERTA
STYLE SELECTIONS y el diseño del logotipo
son marcas comerciales o marcas registradas
de LF, LLC. Todos los derechos reservados. ADJUNTE SU RECIBO AQUÍ
¿Preguntas, problemas, piezas faltantes? Antes de volver a la tienda, llame a nuestro
Departamento de Servicio al Cliente al 1-877-888-8225, de lunes a domingo de 8 a.m. a
8 p.m., hora estándar del Este. También puede ponerse en contacto con nosotros en
[email protected] o visitar www.lowespartsplus.com.
Número de serie Fecha de compra
SM20458

9
CONTENIDO DELPAQUETE
Verifique detenidamente que ninguno de los componentes estédañado o que no falte ninguna pieza
antes de la instalación. Si hay piezas dañadas o faltantes, no continúe con la instalación. Informe al
fabricante de inmediato sobre los daños y las piezas faltantes.
B
A
ÍNDICE
Contenido del paquete .......................................................................................................................9-10
Aditamentos ..........................................................................................................................................10
Información de seguridad ......................................................................................................................10
Advertencia ...........................................................................................................................................10
Preparación ...........................................................................................................................................10
Herramientas necesarias (no se incluyen) ...........................................................................................11
Instrucciones de instalación ............................................................................................................11-13
Cuidado y mantenimiento .....................................................................................................................13
Garantía ...............................................................................................................................................13
Lista de piezas de repuesto ..................................................................................................................14

10
CONTENIDO DELPAQUETE
Nota: los aditamentos no se muestran en tamaño real.
ADITAMENTOS
AA
INFORMACIÓN DE SEGURIDAD
• Mantenga a los niños alejados de las piezas pequeñas.
ADVERTENCIA
Antes de comenzar a ensamblar el producto, asegúrese de tener todas las piezas. Compare las
piezas con la lista del contenido del paquete y la lista de aditamentos. No intente ensamblar el
producto si falta alguna pieza o si estas están dañadas.
Tiempo de instalación estimado: 20 a 30 minutos (24 horas para que seque el adhesivo).
Herramientas y materiales necesarios para la instalación (no se incluyen): sierra, martillo, taladro de
velocidad variable, cinta métrica, nivel, llave inglesa ajustable, detector de vigas, pernos de cabeza
cuadrada, destornilladores (Phillips y de cabeza plana), dado y trinquete (para los pernos de cabeza
cuadrada), tornillos de fiador (opcionales), masilla de calafateo/sellador de silicona transparente (no
usar masilla de plomero).
PREPARACIÓN
Lea y comprenda completamente este manual antes de intentar ensamblar, usar o instalar el
producto.
• Algunos de los pasos se pueden realizar con mayor facilidad entre 2 adultos.
Aplicador de retoque
Cant:1
PIEZA
DESCRIPCIÓN
CANTIDAD
A
Tocador
1
B
Cubierta para tocador
1