Style selections Cromlee 1211VA-48-242 User manual

1
VANITY WITH VESSEL
SINK AND FAUCET
MODEL #1211VA-48-242
Serial Number Purchase Date
1
ATTACH YOUR RECEIPT HERE
Questions, problems, missing parts? Before returning to your retailer, call our customer service
department at 1-866-439-9800, 8 a.m. - 8 p.m., EST, Monday - Sunday.
welcoming • sophisticated • inspiring

TABLE OF CONTENTS
Package Contents...........................................................................................................................3
Hardware Contents..........................................................................................................................3
Safety Information. .........................................................................................................................3
Preparation ....................................................................................................................................4
Assembly or Installation Instructions .............................................................................................4
Care and Maintenance ...................................................................................................................8
Warranty ........................................................................................................................................8
Replacement Parts List ................................................................................................................. 9
2

3
PACKAGE CONTENTS
SAFETY INFORMATION
Please read and understand this entire manual before attempting to assemble, operate or install this
product.
WARNING
• Some steps are more easily handled with two adults.
• Assembly and unpacking requires two adults.
CAUTION
KEEP THESE INSTRUCTIONS FOR FUTURE REFERENCE.
HARDWARE CONTENTS (NOT SHOWN ACTUAL SIZE)
Touch-Up Pen
Qty. 1
AA
PART DESCRIPTION QUANTITY
A Vanity 1
B Top 1
CDrawer (preassembled
to Vanity(A)) 2
D Sink 1
E Faucet and Drain Kit 1
• Use care when assembling the vanity; take your time and follow the assembly instructions closely.
D
E
B
A
C
C

4
PREPARATION
Estimated Installation Time: 20-30 minutes (24 hours for silicone caulk to dry).
Helpful Tools (not included): Measuring tape, level
INSTALLATION INSTRUCTIONS
Before beginning assembly of product, make sure all parts are present. Compare parts with package
contents list and hardware contents list. If any part is missing or damaged, do not attempt to
assemble the product.
Tools Required for Installation (not included): Phillips screwdriver, utility knife or scissors, silicone caulk,
power drill with drill bit
1. Please remove the Top (B) from the Vanity (A).
Place the Top (B) face down onto a scratch-free
surface.
1
A
B

5
INSTALLATION INSTRUCTIONS
WARNING
Vanity (A) MUST be secured to wall.
Note: Clean area where the vanity (A) will be
permanently located prior to beginning installation,
ensuring the vanity (A) will not interfere with any
water supply and drain lines once mounted.
3.
With the help of another adult, carefully place
vanity (A) against the wall in its final location.
From inside vanity (A), drill hole through vanity
mounting area and into wall studs. Using
mounting hardware (not included) appropriate
for your installation site, secure vanity (A) to
wall stud. If possible, secure vanity (A) to
two wall studs for increased stability.
Note: Use preassembled levelers on legs of
vanity (A) to level the item. Twisting the
levelers counterclockwise will increase the
height of vanity (A), twisting them clockwise
will decrease it.
2. To remove drawers from vanity base (A),
fully extend drawers and locate the plastic
levers on left and right sides of the metal glide
tracks. Push the plastic levers, on both sides,
at the same time, This will disengage the
drawer box from the glides. Gently lift up on
the drawer to remove it from the glide tracks.
Set aside as these will be re-installed.
2
A
2
1
3
Mounting Plate
A
12

6
INSTALLATION INSTRUCTIONS
4. Apply silicone caulk (not included) to the top edge
of vanity (A). With the help of another adult, gently
lower top (B) onto the vanity (A). Wipe away any
excess caulk with a soft cloth, and wait approximately
24 hours for it to dry.
5. Clean bottom surface of sink (D). Following
silicone sealant’s manufacturer directions, apply
a uniform bead of silicone sealant (not included)
around bottom outer ring of sink (D). Lower sink
(D) onto vanity top. Align sink’s bottom drain
hole with inner hole of vanity top.
Note: Make sure sink (D) is completely dry
before applying sealant.
4
1
A
B
2
2
5
D
1
A
2

6. Following manufacturer’s enclosed assembly
instructions, install faucet and drain kit (E) to
vanity (A).
7
INSTALLATION INSTRUCTIONS
CAUTION
7. To reinstall drawer into vanity (A), fully extend
metal glide tracks. Gently lower and slide
drawer box into rear glide catch. Next, lower
drawer box down to completely rest on
extended glides. Then, push plastic levers to
lock the drawer box in place.
Note: To adjust the drawer box height, spin
the adjustment wheel to the left to raise the
drawer box or spin the adjustment wheel to
the right to lower the drawer box. You can
adjust the left and right side glide heights
independently in order to find the drawers best
alignment position.
DO NOT force drawer or damage to glide may
occur. If drawer does not slide in with ease,
remove and try again from the start.
6
A
B
E
D
7
A
1
3
2

8
WARRANTY
CARE AND MAINTENANCE
• Do not clean the sink with detergents, acids, abrasives or other harsh cleaners as they will dull the
finish.
• Dust the vanity regularly with a soft, non-lint producing cloth or household dusting product.
• You can clean the vanity with a gentle, non-abrasive household cleaner.
• Make sure to dry the wood immediately with a soft cloth or towel.
• Tips for using touch-up pen (AA): For scratches, stroke in direction of scratch; for worn areas,
stroke in direction of wood grain. Rub off excess colorant promptly with a soft cloth.
The manufacturer warrants this item against defects in materials and workmanship for a period of one
(1) year from the date of original retail purchase. This warranty applies only to the original purchaser.
This warranty does not apply to any damage on the product by accident, misuse, or modified,
improper installation or by affixing accessories not produced by the manufacturer. The manufacturer
is not accountable whatsoever for product installation during the warranty period. There is no further
expressed warranty. The manufacturer shall not be legally responsible for incidental, consequential
or special damages arising at or in connection with product use or performance except as may
otherwise be accorded by law. The manufacturer disclaims any and all implied warranties.
IMPORTANT
• Shade variations and patterns are an inherent characteristic of stone (e.g. granite, marble,
engineered stone). Stone tops will vary from product to product. Use caution placing items
such as soap or any fragranced material on the stone surface. Use a soap dish, coaster or
similar item to protect the surface if placing any soap or fragranced products on the stone.
• If soap or fragranced products come in contact with the stone top, rinse the surface with
water and dry using a soft non-abrasive cloth.
• WARNING: Must use cleaning agents safe for stone. Check your cleaning agents use
restrictions before using on any stone. Damage to the stone may result. Vanity manufacturer
not responsible for damage caused by improper cleaning agents or soaps used. Warranty
will not cover damage caused by the use of improper soaps or cleaning agents.
• DO NOT use products to clean the stone top that contain acetone, lemon, vinegar or other
acids as these may cause damage to the stone surface.
• Periodically reseal the stone top using an appropriate stone sealer available from your
local home store. Follow the manufacturer’s directions on how to apply.

9
REPLACEMENT PARTS LIST
For replacement parts, call our customer service department at 1-866-439-9800, 8 a.m. - 8 p.m.,
EST, Monday - Sunday.
PART DESCRIPTION PART #
BTop PH-1211VA-48-TOP
DSink CF-1211
F Drawer Front PH-1211VA-48-242-
DRAWER FRONT
AA Touch-up Pen OF-0120R
EFaucet And Drain Kit FS6A0194NP
BB Drawer Handle PH-1211-BN
CC Drawer Glide Set PU-14X3-HANDLE
DD Leveler T-1007
EE Aerator With Removal Key 1211- AERATOR WITH KEY
FF Cartridge 1211-CARTRIDGE
GG Drain Assembly 1211-DRAIN
AA BB CC DD EE FF GG
E
D
B
F