Summit to Sea SHALLOW DIVE User manual

————--
SHALLOW DIVE

Congratulations on choosing one of the most innovative and
safe hyperbaric chambers. !"
In addition to this manual we have an easy to follow
instructional video available"
https://www.summit-to-sea.com/instructions"
Click on “Shallow Dive”

!"
Our patented designs are like no other on the market."
Now that you have all the equipment to begin your
treatments it is extremely important to watch this entire
video and read the manual that was included on a thumb
drive in your packet before operating your chamber."

SAFETY FIRST
Safety is one of our main priorities at Summit to Sea. It is our policy and
practice to extensively test all of our chambers to ensure that Summit to
Sea chambers have the highest quality, comfort, and safety. "
We have implemented 4 safety features that are unique to Summit to Sea
chambers."
•Dual compressor system
•Two pressure relief valves and one
safety back up valve
•Zipper stress relief system
•Failed Circuit Alarm

SAFETY FIRST
For safety Summit to Sea has multiple redundant systems and
components. One of these is the dual compressor system.
In the event one of the compressors fails you would still receive ample
fresh air delivered into the chamber allowing you to deflate the chamber
and safely exit.
Summit to Sea uses these two independent compressor systems which
attach to the chamber independently offering safety and comfort.
Dual Compressor System
VERY IMPORTANT: All compressors need to be running during treatment.

SAFETY FIRST
Your chamber also has dual air relief valves. When you are at full pressure
air will release from the blue valves. Your gauge needle should be in the blue
range. The yellow valve is a safety back up valve set at a slightly higher
pressure which acts as a safety backup valve."
Pressure Relief Valves

SAFETY FIRST
Zipper stress relief system (buckles)
It is very important that when operating the chamber all belts are buckled
and both zippers are completely closed.
The belts reduce stress on the zippers extending their life.

SAFETY FIRST
Summit to Sea is the only company in the mild hyperbaric
industry whose chamber system will alert you to a power outage.
In the event that there is a power outage which would prevent the
compressors from supplying fresh air into the chamber the user
would be alerted with a loud alarm.
Failed Circuit Alarm

COMPLIANCE
Our hyperbaric chambers are Class II medical devices cleared by
the FDA requiring a prescription."
As we are constantly developing new technology to improve our
chambers, there may be a photo or video footage that doesn’t
quite match your chamber. "

WHAT IS INCLUDED
Chamber with carry bag and two cradles
Frame
2 Compressors
In the OPEN ME FIRST BOX
Silicone and Zipper cleaner
Auxiliary Valve
Thumb drive with set up instructions
Failed Circuit Alarm with battery included
Screw driver
Foam mat

ONLINE MANUAL
If you ever misplace this thumb drive you can log on to:"
www.summit-to-sea.com/instructions to find you chamber’s manual.

OVERVIEW
1. Connecting the compressors to the electric outlets and the
chamber
2. Use of Summit to Sea’s unique zipper system
3. Inflating the chamber
4. Connecting the stabilizing cradles to the chamber
5. Connecting the chamber to the frame
6. Mat installation

SET UP
Now it is time to connect the compressors to the electrical outlet."
Please note that some wall outlets are configured so that one of
the sockets is connected to a light switch. "
Avoid using any of these outlets as they could result of in loss of
air flow to the chamber."

SET UP
Directly connecting the compressors to the
wall outlets "
Using a power strip"
Using a remote switch"
Using both the power strip and remote
switch"
The following diagrams will describe several options for connecting your
compressors to the electric wall outlet."

I I
I I
!
CIRCUIT!
ALARM
COMPRESSOR
1
COMPRESSOR
2
SET UP
COMPRESSORS CONNECTED TO THE WALL OUTLET"
Plug the circuit alarm into the wall outlet. "
Next plug one of the compressors into the back of the circuit alarm plug. "
Then plug the second compressor into the other wall outlet."

I I
I I
!
CIRCUIT!
ALARM
COMPRESSOR COMPRESSOR"
I I I I I I I I I I
POWER STRIP
SET UP
USING A POWER STRIP"
Plug the circuit alarm into the wall outlet. "
Next plug the power strip into the back of the circuit alarm plug. "
Now you can plug your compressors into the power strip ."

I I
I I
COMPRESSOR
2
REMOTE
CIRCUIT
ALARM
COMPRESSOR
1
SET UP
USING A REMOTE SWITCH"
Plug the circuit alarm into the wall outlet. "
Next plug the remote into the back of the circuit alarm plug. "
Now you can plug your compressors into the remote."

I I
I I
!
CIRCUIT!
ALARM
COMPRESSOR COMPRESSOR "
I I I I I I I I
POWER STRIP
REMOTE
I I I I I I
SET UP
USING BOTH THE POWER STRIP AND REMOTE SWITCH"
Plug the circuit alarm into the wall outlet. "
Next plug the remote into the back of the circuit alarm plug. "
Then plug the power strip into the remote. "
Now you can plug your compressors into the power strip."

SET UP
Remove the chamber from the carry bag.
Lay out the chamber so the zipper is facing up.
Summit to Sea provides a unique two zipper combination, one
internal air tight zipper and one external mechanical zipper.

SET UP
First press the two sides of the buckle together until you hear the click.
It is important to connect the buckles before closing the zippers. This allows
the zipper to line up making it easier to zip and taking stress off the zipper.