Sun Global Media SunTV2 User manual

SunTV2
Sun Global Media USA，Ltd.

Welcome to SunTV2
Before using the product, be sure to
read this User Guide first. SunTV2's
system is upgraded on a regular basis.
The illustrations in this guide may differ
from the actual product. Please refer to
the actual product.

Contents
Connect.
Configure.
Safety Instruction 11
Turn on SunTV2 12
Video Output Settings 13
Boot Screen 14
2
1What's in the Box 06
SunTV2 at a Glance 07
Setting up SunTV2 08
SunTV2 Remote 09

Settings.
3Settings 16
Network Settings 17
Resolution 19
Scaling 20
Suspend Mode 21
Image Quality 22
Internet Speed Test 23
International Settings 24
About 25
Watch.
Live Broadcast 27
TV Guide 30
Favorite 32
Playback 34
Search 35
4

Services.
6Services & Warranty 39
Troubleshooting 40
Restoring SunTV2 41
Disclaimer 42
WeChat.
Follow SunTV WeChat 37
5

Connect.
What's in the Box 06
SunTV2 at a Glance 07
Setting up SunTV2 08
SunTV2 Remote 09
1

What's in the Box
The following accessories are included within the SunTV2 package:
SunTV2 set-up box, remote control, power plug, HDMI cable, power
cord and a set of user manual.
SunTV2 Power AdapterRemote Control
HDMI Calbe Power Cable
06

SunTV2 at a Glance
07
Connect to Television
Wireless Network/Wi-Fi
Connect to Television
USB Socket
Connect to
Router/ Switch
*Ethernet Cable
Ethernet PortHDMI Port
*AV Cable
Power Cable
110-220v/50-60Hz AC
Power Port
RESET SD/MMC USB Host
DC-5V AV LANHDMI
SD Card Slot
HDMI Cable
*Required to purchase separately

Setting up SunTV2
08

SunTV2 Remote
09
Power on/off Mute
Voice -
Up
Left
Voice +
OK
Right
Down
Return Menu
Home

Configure.
Safety Instruction 11
Turn on SunTV2 12
Video Output Settings 13
Boot Screen 14
2

Safety Instruction
11
Please be sure the power network and voltage meet the requirement of input
voltage equipment （110-220v/50-60Hz）. Please pay attention to the power
socket and power load voltage. Overloaded power outlet or damaged power
cord and plug may cause electric shock or fire. Regularly check the related
connection, if there is any breakage, please replace immediately.
Please always keep the appropriate heat dissipation space to avoid overheating
of the product and related problems.
Keep it at a place where children can't reach. Do not place any heavy objects
on it.
Do not use this product near water.
Be sure to use the original power plug within the SunTV2 package, if you need
to use other types of adapter, please consult customer service personnel in
advance.
Please choose the right type of battery when using the remote control (3V
Lithium CR2032).
Opening or removing covers may expose you to dangerous voltages or other
risks. Incorrect reassembly can cause electric shock when the appliance is
subsequently used.

Turn on SunTV2
12
The set of equipment and the power adapter are connected
correctly.
Power supply is working.
Network connection is correct, and the network works.
Audio, video, and the power cord are in the correct connection.
Turn on your TV.
Use SunTV2 remote to turn on the set-top-box.
Press “SOURCE” or “INPUT” on the TV remote to select the
correct video output.
Steps of Turning on SunTV2:
Before turning on SunTV2, please confirm:

Video Output Settings
Once the installation is completed, select the HDMI connection
signal, for example: HDMI1 or HDMI2.
After turning on the SunTV2, use TV remote to select the correct
video output signal. For example: press “SOURCE” or “INPUT” and
select “HDMI1”.
信號源
電視
AV1
AV2
VGA
HDMI1
HDMI2
USB1
USB2
13

Boot Screen
Once the above operation is completed, turn on your SunTV2 and
confirm the correct video output. The SunTV2's initial boot screen
will appear on your screen (see picture above).
14

Settings.
Settings 16
Network Settings 17
Resolution 19
Scaling 20
Suspend Mode 21
Image Quality 22
Internet Speed Tester 23
International Settings 24
About 25
3

Settings
Select “Settings” as the picture shown above.
Use the arrow keys on the remote control to select specific
operation, and then press “OK” button to confirm.
16

Network Settings
After the boot screen disappears, SunTV2 will automatically search
wireless network around. Use the arrow keys on SunTV2 remote to
select your home wireless network. Move the cursor to your
network name, then press the “OK” button to complete your setup.
17

Network Settings
A keyboard will appear on your screen after selecting the name of
your home wireless network.
Please use the arrow keys on the SunTV2 remote and type in your
home wireless network password. Press “ ” to delete. Press “OK”
on the keyboard to complete (passwords are case sensitive be sure
to use correct upper and lower case).
18

Resolution
SunTV2 default resolution is 720p, as well as 576p, 1080i and
1080p for your choice.
Use the arrow keys on your SunTV2 remote to select the
appropriate resolution, then press the “Back” button to complete
your setup.
19