Sun-Tech 040 Pixel light User manual

Focus on customized architectural lighting
wwww.suntechleds.com [e-mail]
040 Pixel light
Description
Application environment: indoor, outdoor
1
、
Flat cover measurement
Frame installation with flat cover measurement Base installation with flat cover measurement
Measurement (Unit:mm)
The 040 pixel light
is a low power LED string product designed
for outdoor landscape lighting. It adopts engineering grade
flame
-retardant plastic P
C shell, which is sealed and waterproof by
high thermal conductivity and weather
-
resistant PU glue; the lamp
point is small in size and exquisite in appearance; the light string is
connected by the national standard flexible cable, which can be bent
and de
formed at will, and supports the installation of special-
shaped
façade; The product spacing and color can be customized; it is
suitable for large
-
area display or lighting of building facades, bridges
and skylights.
Features
：
★
New generation dual channel real-time backup control protocol
★
Standard DMX512 Control Protocol
★
Industry-leading wireless button-type anti-smash connection design
★
High thermal conductivity glue full potting waterproof design
★
Outdoor lightning
protection and Electrostatic (ESD)special protection
design
★
Flexible, flexible application, multiple mounting methods
★
Steel cable installation light transmittance up to 90%
★Support RGB/W current separately adjustable (low light and high gray)

Focus on customized architectural lighting
wwww.suntechleds.com [e-mail]
2
、
Standard ball cover measurement
3
、
Diamond ball cover measurement
Frame installation with standard
ball cover measurement
Base installation with standard
ball cover measurement
Frame installation with diamond
ball cover measurement
Base installation with diamond
ball cover measurement

Focus on customized architectural lighting
wwww.suntechleds.com [e-mail]
Technical Parameters:
Product selection table
Model
Light
source
quantities
Light
source
Color Control
DC
Operating
Voltage
Power
White light
light
intensity
CA040-03AU 3 PCS 3535 RGB/W
Dual channel
Real-time backup
TTL
12V 0.72W 7.5cd
CA040-03AE 3 PCS 3535 RGB/W DMX512 12V 0.72W 7.5cd
CA040-03XT 3 PCS 5050 RGBW TTL 12V 1.0W 12cd
CA040-03XD 3 PCS 5050 RGBW DMX512 12V 1.0W 12cd
CA040-03CN 3 PCS 2835 W No control 12V 0.72W 15cd
CA040-04AU 4 PCS 3535 RGB/W
Dual channel
Real-time backup
TTL
15V 0.9W 10cd
CA040-04AE 4 PCS 3535 RGB/W DMX512 15V 0.9W 10cd
CA040-04XT 4 PCS 5050 RGBW TTL 15V 1.2W 16cd
CA040-04XD 4 PCS 5050 RGBW DMX512 15V 1.2W 16cd
CA040-04CN 4 PCS 2835 W No control 15V 0.9W 20cd
Basic parameters
Color/gray RGB/W each 4096 grayscale; RGB/W each 65536 grayscale; RGB/W each 256 grayscale
Light source 3535 / 5050 / 2835 LED quantities 3pcs / 4pcs / 6pcs / 9pcs
Material Flame retardant PC Cover material Flame retardant PC
Lifespan 50,000h Weight 18g
Optical parameters
Operating
Voltage
DC12V / 15V / 24V / 36V Maximum power 0.72W / 1.0W / 1.44W / 1.9W /2.2W
RGB Light
intensity
15cd White light 30cd
Beam angle Flat cover120°/ Ball cover 160° Electric grade Class III
Other parameters
Operating
temperature
-20°C to 50°C
Storage
temperature
-40°C to 70°C
Protection level IP66
Light distribution curve

Focus on customized architectural lighting
wwww.suntechleds.com [e-mail]
CA040-06AU 6 PCS 3535 RGB/W
Dual channel
24V 1.44W 15cd
CA040-06AU-2 6 PCS 3535 RGB/W Dual channel 36V 1.7W 15cd
CA040-06AE 6 PCS 3535 RGB/W DMX512 24V 1.44W 15cd
CA040-06AE-2 6 PCS 3535 RGB/W DMX512 36V1.7W 15cd
CA040-06XT 6 PCS 5050 RGBW TTL 24V 1.9W 24cd
CA040-06XD 6 PCS 5050 RGBW DMX512 24V 1.9W 24cd
CA040-06XD-2 6 PCS 3535 RGBW DMX512 36V 2.2W 24cd
CA040-06CN 6 PCS 2835 W No control 24V 1.44W 30cd
CA040-09ZD 6 +3PCS
3535
+2835
RGBW DMX512 24V 1.9W 20cd
Mounting parts dimensions
Support single mounting parts by screw fixing, wire fixing, support frame installation.
Commonly used wire accessories:
The first frame installation dimension
drawing (unit: mm)
PC single mounting base size drawing (unit: mm)
The second frame installation dimension
drawing (unit: mm)
Hanging hook
Clip head
Steel wire loop
Hanging head 1
Hanging head 2
Hanging head 3
Cover Base

Focus on customized architectural lighting
wwww.suntechleds.com [e-mail]
PC single base + steel cable installation method 2:
PC single base installation method 1:
①
PC installation base installation:
Use a suitable self-tapping screw to
secure the PC mounting base to the
desired position, with the spacing
required by the string spacing of the
project order.
②
pixel light installation:
After the PC mounting base
is firmly installed, the point
light source is stuck into the
PC mounting base;
③
installation is completed:
Schematic diagram after
installation is complete.
②
Pixel light installation:
After the PC mounting base
is fixed, the point light
source is stuck into the PC
mounting base;
③
adjustment pitch :
After the installation is
completed, the pixel light pitch
can be fine
-
tuned to ensure that
the point source is installed
neatly! (schematic diagram after
installation)
①wire fixing and PC base
installation:
Fix the two ends of the wire to the
mounting
base, and then fix the PC
mounting base to the wire. The
spacing is required according to the
order spacing of the project order
lights!

Focus on customized architectural lighting
wwww.suntechleds.com [e-mail]
Frame installation method 1 :
①
installation carrier drilling:
Drill a hole in the position where the
carrier is required to be drilled by
selecting a suitable drill bit;
②
Install the expansion screw:
Use a suitable expansion screw to
knock the expansion screw into the hole
drilled in the mounting carrier;
⑤
mounting profile cover:
The top cover of the frame with the
light source installed is aligned with
the mounting base and fastened to
the profile mounting base;
③
mounting frame mounting base:
Remove the nut and gasket of the
installed expansion screw, and align
the hole of the frame base with the
expansion screw and attach it to the
installation carrier;
④
fixed frame mounting base:
After installing the upper frame base,
install and tighten the gasket and nut of
the expansion screw, and do not loosen
it;
⑥
mounting profile reinforcement screws:
After installing the upper cover of the profile,
use two self-tapping screws from the lower
side to fix the profile upper cover and the
profile mounting base to prevent the profile
cover from falling.

Focus on customized architectural lighting
wwww.suntechleds.com [e-mail]
Frame installation method 2:
⑤mounting profile reinforcement
screws:
After installing the profile, check that it
is securely installed to prevent the top
cover from falling.
①
installation carrier drilling:
Make a mark on the mounting carrier
according to the hole position on the
mounting profile, and drill the hole on
the carrier with a suitable drill bit;
②Install the carrier with expansion
rubber plug:
Knock the expansion rubber plug into the
drilled hole of the carrier with a hammer
(Note: the rubber plug should not be
loose);
③
installation profiles:
Align the hole on the top cover of
the profile with the screw hole and
attach it to the mounting carrier;
④
fixed profiles:
After installing the upper profile base,
screw the self-tapping screws into the
rubber plugs, press the base tightly, and
do not loosen.

Focus on customized architectural lighting
wwww.suntechleds.com [e-mail]
System
connection
1、The main controller is equipped with sub-controller and signal adaptor. The main control and sub-control
working voltage is AC220V. The working voltage of the signal adaptor is the same as the working voltage of
the pixel light.
2、Each sub-controller has 8 ports. The TTL sub-controller can carry 512 (RGB) pixels per port. The DMX
sub-controller can carry 170 (RGB) pixels per port. It is used with the signal adaptor and supports 200
meters long distance transmission.
3、The main control and sub-control, sub-control and sub-control are connected by CAT5 twisted cables, the
maximum distance of each section is less than 120 meters; the maximum transmission distance between
the sub-controller and the signal adaptor is less than 120 meters. In this case, the maximum distance from
the signal adaptor to the first pixel light is no more than 2 meters.
4、It is recommended that the maximum point spacing should not exceed 2.5 meters, and each intermediate
power supply can support the power supply distance of 6 meters left and right (can be adjusted according to
the project conditions).
Control
system
TTL Dual channel real-time
back up
DMX512
Main controller C950,S950,T950A C950,S950,T950D
Sub controller MR218A DT-218DW
Signal adaptor
Signal adaptor
AD-001 Differential
Signal adaptor
AD-002 Differential
Signal adaptor
Signal cable Two-core shielded wire
Two-core shielded wire/
Three-core shielded wire

Focus on customized architectural lighting
wwww.suntechleds.com [e-mail]
Notes:
1. Please read the installation manual carefully before using the product.
2. The product is handled gently and gently to avoid damage to the product. Installation, maintenance and
maintenance must be handled by professionals;
3. The external power supply must be cut off during wiring to prevent people from getting an electric shock or
damaging the lamp;
4. When the external power cord is connected, the corresponding measures of waterproofing and water
leakage must be taken;
5. The male and female waterproof protective covers for the products shall not be removed before the
products are installed and connected;
6. Quality Assurance: Under normal conditions of use, quality assurance is based on the proper storage,
installation, use and maintenance of the product.
(Note: Product damage caused by improper installation and use, in violation of product operating procedures, is not
within the scope of product quality assurance.