
1
Sunbeam’s Safety Precautions 1
Features of your FitBlend™ Blender 2
Using your FitBlend™ Blender 3
Charging your FitBlend™ 4
FitBlend™ LED Indicators 4
Care and Cleaning 5
TroubleShooting 5
Recipes 6
Contents
SAFETY PRECAUTIONS FOR YOUR SUNBEAM
FitBlend™ BLENDER.
• Ensure fingers are kept well away from the
blades when in use.
• Do not blend warm/hot ingredients. Always
cool ingredients to room temperature before
processing.
• Product misuse can cause potential injury.
• Take care during fitting and removal of blade
system, as blades are extremely sharp.
• The blender will automatically stop after
30 seconds. Repeat blending until desired
consistency is reached.
• Only supply power to the blender at safety
extra low voltage corresponding to the
marking on the blender.
• This appliance contains batteries that are
non-replaceable.
Sunbeam is very safety conscious when
designing and manufacturing consumer
products, but it is essential that the product
user also exercise care when using an
electrical appliance. Listed below are
precautions which are essential for the safe
use of an electrical appliance:
• Read carefully and save all the instructions
provided with an appliance.
• Ensure the appliance is turned off before
cleaning.
• Do not use your appliance with an extension
cord unless this cord has been checked and
tested by a qualified technician or service
person.
• This appliance is not intended for use by
persons (including children) with reduced
physical, sensory or mental capabilities, or
lack of experience and knowledge, unless they
have been given supervision or instruction
concerning use of the appliance by a person
responsible for their safety.
• Do not allow children to use blender without
supervision.
• The temperature of accessible surfaces may be
high when the appliance is operating.
• Never leave an appliance unattended while in
use.
• Do not use an appliance for any purpose other
than its intended use.
• Do not place an appliance on or near a hot gas
flame, electric element or on a heated oven.
• Do not place on top of any other appliance.
• Do not operate any electrical appliance with
a damaged cord or after the appliance has
been damaged in any manner. If damage
is suspected, return the appliance to the
nearest Sunbeam Appointed Service Centre for
examination, repair or adjustment.
• Do not immerse the appliance in water or any
other liquid unless recommended.
• Appliances are not intended to be operated by
means of an external timer or separate remote
control system.
• This appliance is intended to be used in
household and similar applications such
as: staff kitchen areas in shops, offices and
other working environments; farm houses; by
clients in hotels, motels and other residential
type environments; bed and breakfast type
environments.
•
This blender will automatically stop after 30
seconds.
•
This blender must only be supplied at safety
extra low voltage (5V output USB adapter)
corresponding to the marking on the
appliance.
•
This appliance contains batteries that are
non-replaceable.
Sunbeam’s Safety Precautions
If you have any concerns regarding the performance and use of your appliance,
please visit the Sunbeam website or contact the Sunbeam Consumer Service Line.
Ensure the above safety precautions are understood.
Important Instructions - Retain For Future Use
PBP0500_20EM1 (ANZ).indd 2-1PBP0500_20EM1 (ANZ).indd 2-1 6/5/20 10:486/5/20 10:48