SunEyes SP-FJ01W User manual

Wireless IP Camerea
SunEyes Group Co.,Ltd
User Manual
SP-FJ01W SP-FJ02W

User manual
2
Contents
1 WELCOME..................................................................................................................-3-
1.1 Features................................................................................................................-3
1.2 Pcking list.............................................................................................................-4-
1.3 Product view.........................................................................................................-4-
1.3.1 Front View..........................................................................................................-4-
1.3.2 Rear Panel........................................................................................................ .-5-
1,4 PC System Requirements....................................................................................-5-
1.5 Hardware Instruction............................................................................................-6
1.6 Software installation.............................................................................................-6-
2 SOFTWARE OPERATION.......................................................................................... -8-
2.1 IP Camera Finder .............................................................................................-8-
2.2 Camera Login.......................................................................................................-13
2.3 Camera Icon Functions.................................................................................... -15
2.4 Setting details(user&password)………………………………………………………16
2.4.1 Multi-Device Settings...................................................................................- 17
2.4.2 Network Settings..........................................................................................- 19
2.4.3 Wireless Settings ................................................................................ ………19
2.4.4 DDNS Service Settings...................................................................................20
2.4.5 Mail and FTP Serivce ......................................................................................21
2.4.6 Motion Detection Alarm……………………………………………………………22
3 IP Camera Super-Client Software..............................................................................-24
3.1 Step by step to use..............................................................................................-24
3.2 Add Equipment IP Camera...................................................................................-25
3.3 Email&Motion Detection Alarms Settings …………………………………………27
3.4 Record Settings by Schedule……………………………………………………..-…..28
3,5 Paly Back the Videos ...................................................................................-…….28
3.6 Setting Storage Path ...........................................................-………………………29
3.7 More details help about this software…………………………………………………30
4 How to View the Camera at outise networks and on Mobile phone,Iphone………..31
4.1 Using a Router to acess the internet.....................................................................-31
4.1.1Do Port Forwarding in the LAN Routers ...................-………………………………32
4.2 Static IP User ……………………………………………………………………………….33
4.3 How to use other DDNS......................................................................................-….34
4.4 how to surveillance from iphone ,Smart phones...................................................34
4.1.1 Use the Mobile Phone Browser….…………………………………………......…-34
4.1.2 Use the Mobile Software………………………………. …………………......…...-36
5 FAQ………………………………………………………………………………………………39
1 WELCOME

User manual
3
IP Camera is a new generation product combined with analog camera & IP video
technology. Despite all functions which analog cameras have, IP camera can compress and
encrypt video and audio signal then through internet send them to remote terminals with its
built-in processor and web server. Via its IP address, users can use standard PC IE browser to
visit IP camera, real time monitor targets, manage and store video or image. PT control also is
available through network.
Being a new member of camera family, IP camera shares the same operation functions
with the analog camera, such as, auto white balance, auto shutter speed, AGC, auto backlight
compensation etc. On the other hand, IP camera supports remote access through internet and
multi-user visit. Some IP cameras are able to extend to both analog and digital signal.
F series IP camera‘s core is 32Bit RSIC. It adopts standard MJPEG compression format.
The camera sensor is CMOS which supports auto white balance and backlight balance,
support IE, cell phone browser, centralized monitor interface management. In general, as its
function of audio simplex & duplex, infrared, wired, wireless, local storage, it has hundreds of
products, to meet requirements of various kinds of users.
1.1 Features
MJPEG video compression
Wireless(Wifi 802.11B/G/N,WEP,WPA,WPA2)
Remote Pan Tilt (P: 355°T:90°Speed adjustable) (SP-FJ01W)
IR night vision(Range:10~15m)
Support two-way audio function (SP-FJ01W)
High-sensitivity CMOS sensor
Resolution:640 x 480(VGA), 320 x 240(QVGA)
Video Frame Rate:25fps(QVGA), 15fps(VGA)
Minimum Illumination:0.5Lux @ F2.0
Supports control P/T through IP network(SP-FJ01W)
Support auto Pan Tilt(SP-FJ01W)
Supporting up to 4 users online simultaneously
Supporting image snapshot and video record
Support image flip ,mirror
Brightness and Contrast adjustable
Built-in 10M/100M auto MDI/MDIX Ethernet interface
Light Frequency:50Hz, 60Hz or Outdoor
Multi-level users management and passwords definition
Built-in Web server, supports remotely viewing and/or management the camera form a
standard Web browser on any computer which can trhough internet.
Supporting Dynamic IP (DDNS) ,Buit-in Free DDNS
Giving alarm in cause of motion detection, sending pics to email or FTP, record videos on
pc when alarms.
Supporting multiple network
protocols:HTTP/TCP/IP/UDP/STMP/DDNS/SNTP/DHCP/FTP

User manual
4
Support mobile surveillance like Smart phone,3G phone,IPhone,PDA,etc.(Has APP Soft)
Free 81ch professional software clients support.
Ten language (English, Simplified Chinese, Traditional Chinese, Spanish, French,
Russian, Polski, Italian, German, Portugal) support
Support Firefox browser
Reset button available if lost password
1.2 Packing List
Untie the pack and check the items contained against the following list;
 Wireless IP Camera 1
 Wi-Fi Antenna 1
 DC Power Supply 1
 CD 1 (User Manual﹑software)
 Mounting bracket 1
NOTE:Contact us immediately in the case of any damaged or short of contents.
1.3 Product views
1.3.1 Front view
SP-FJ01W SP-FJ02W
1.3.2 Rear panel

User manual
5
LAN: RJ-45/10-100 Base T
DC5V: 5V/2A Power supply
RESET BUTTON: press and hold down the RESET BUTTON(Figure 1.3 underpan)
for 7-10 Seconds .Release the reset button and IP Camera will be reset back to the
factory default Parameter.
1.4 PC System Requiements
Minimum Hardware Configuration
CPU: Pentium 1.6 GHz
Memory: 256MB
Audio card: need audio monitor, two way talkback essential
Hard Disk : if need to record video image，no less than 40G
Operation System: 32 bit simple/ English Windows2000、Windows XP、
Windows2003、Windows Vista & 64 bit simple Chinese/English Windows2003、
Windows XP、Windows Vista etc.
Software environment
IE 5.0 or above version
DirectX8.0 or above version
TCP／IP network protocol
1.5 Hardware Instruction

User manual
6
Follow the steps below to set up your camera hardware.Make sure to follow each step
Carefully to ensure that the camera operates properly
1) Plug the network cable into the camera and then into your Cable/DSL router.
2) Plug the power adapter into the camera and then into the power outlet.
1.6 Software installation
Software installation is the key to the successful use of this product.
1 Open the CD,find the software as instruction;
2 Double click Super Client and install the software as instruction.
3 Only click Next,you will complete the software installation.

User manual
7
From the computer desktop you can find an icon appears on
the Desktop automatically.
NOTE:Before installing and using the product, please read the following precautions
carefully and make sure they are fully understood.
Use only the power adapter attached with the product .Use of unauthorized power
adapter may cause damages to your IP Camera.
Do not touch the lens of the IP Camera at will .The optimum focus range has been set
before the IP Camera is delivered out of the factory. If you turn the lens,it may cause
incorrect focus and vague images.
Do not turn the Pan/Tilt by force for it may cause damage to intemal components of
the Pan/Tilt.
IP Camera terminal shall be installed in an indoor environment.(SP-FJ01W)

User manual
8
2 SOFTWARE OPERATION
2.1 IP Camera Finder
When the Device has been mounted properly, you can double click the Icon “IP Camera
Wizard” and a dialog box will pop up.
Wizard Mode(if you not familiar the settings pls chose this mode):

User manual
9

User manual
10
(you can use One key Set or Manually set)

User manual
11
Advanced Mode (if you are already familiar with the settings pls chose this mode):
 Basic Properties
There are some device informations in the Basic Properties ,such as Device
MAC,System Firmware Version, Web UI Version.

User manual
12
Note: The software searches IP Servers automatically over LAN.
1 .The ip camera and the pc should be in the same LAN, if you not familiar how to
configure your ip you can use one key set
2 To install more than one cameras in the LAN,all of the cameras port and IP
address can not be same.
3. pls make sure the camera ip address is in the same subnet as the gateway
(i,e .the first three sections are the same)
4.Mask: The default subnet mask of the equipment is :255.255.255.0
5.Gateway: Make sure it is in the same subnet with PC IP address .Default
Gateway address is 192.168.1.1
6.DNS: IP address of IPS network provider.
7.Port:LAN port assigned for the equipment, usually 81-10000
8.User & Password : Default administrator username/password: admin?No
password

User manual
13
2.2 Camera Login in IE (LAN)
You can access the camera through IP Camera Tool or IE directly.
1) Click the inner RUL: “open”
2) It will start your web browser automaticly.
Enter your account and password on the login page as shown above
Administrator’s username is: admin and no password… Sign in with ActiveX Mode(for IE)

User manual
14
2.3 Camera Icon Functions
Rotate the cameras(pan/title)
Auto Pan/Titlt Ajust Pan/Tilt Speed:
If you want to detect 4 or 9 views, need to click this ico
Flip: To see the flip image.

User manual
15
Mirror: To see the mirror image.
Resolutions: can chose 320*240 or 640*480
Mode: can chose 50HZ ,60HZ or outdoor
Brightness and Contrast:can set the brightness and contrast
Record:Click icon to record videos
Snapshot: Click icon to snap the picture.
AUDIO: Click icon Camera MIC open, Local Voice input
TALK: Click icon Camera Speaker open, Remote Voice Output
2.3 Setting Details :

User manual
16
Alias Serrings: You can Input the new name as you like.
Data&Time Settings: Data&Time Settings page.
Users Settings:Eight accounts are acceptable for this system.Here the eight users can
Configure their user names and password as administrator,Operator or Visitor.
Administrator:You can sertup the advanced configurations of the IP Camera.
Visitor: In this mode ,you can only view.
Operator:You can control the direction of IP Camera and set some parameter.

User manual
17
2.4.1
Multi-Device Settings
Use multiple cameras in LAN
In the Multi-Device Settings page, you can see all devices searched in LAN. You can add
more cameras list in LAN for monitoring

User manual
18
2.4.2 Network Settings:
Http Port: if multi cameras this port cannot be same in one LAN.
2.4.3Wireless Lan Settings:
Click the Scan button (at least two times),select your wifi SSID, and write in your wifi’s
password.

User manual
19
ADSL Settings ( pls don’t use it ,if you use routers)
When connected to the Internet through ADSL directly ,you can enter the ADSL username
and password obtained from ISP.
2.4.4DDNS Service Settings
DDNS Service: The system support protocols from some DDNS providers,and our own
ddns IPCAM( built-in)..
User and Password: the user name and password used when applying for the domain
name .(if use our Built-in ddns, and you can find the ddns user and password from the
label of ip camera)
DDNS or Proxy Server: If you access the DDNS host through a proxy, you should input
the Proxy IP.(if use our Built-in ddns,it’s should be user.suneyes.hk)
DDNS or Proxy Port: Proxy Port.(if use our Built-in ddns, the port should be 808 or 80)

User manual
20
2.4.5Mail and FTP Service
Configure the E-mail box to receive and send mails. The E-mail box is used for receiving
the images sent after alarm and the system IP address after successful dial-up.