SunEyes V Series User manual

Page
1
on Page
41
S
Su un nE Ey ye es s V V S Se er ri ie es s I IP P C Ca am me er ra a U Us se er r M Ma an nu ua al l
Version：V4.4
Applicable equipment version：V6.9.8.1.1-20141113 and later
This documents can be used for 1080P IR PTZ IP Camera.

SunEyes V Series IP Camera Quick Installation User Manual
Page
2
on Page
41
S
St ta at te em me en nt t
This manual may exist in some technical details description inaccurate or printing
errors, if you cannot solve the problem as this manual when using,pls contact our technical
department to inquire relevant operation method. The contents of this manual will update at
any time, without prior notice.
A
At tt te en nt ti io on n

 I In ns st ta al ll la at ti io on n e en nv vi ir ro on nm me en nt t
 Away from high temperature pyrogen and environment; avoid direct sunlight.
 In order to ensure the normal heat dissipation, you should avoid poorly ventilated
places, pay attention to waterproof, moistureproof, lightning protection. If you want to
install outdoors, you should install waterproof casing to fix the camera in it.
 The machine should be installed horizontally or wall hanging, avoid installed in place of
violent vibration, don’t put other devices on it.

 T To o a av vo oi id d e el le ec ct tr ri ic c s sh ho oc ck k a an nd d f fi ir re e
 Please don’t use wet hand to touch the power and camera.
 Don’t splash liquid on the camera,, to aviod the machine of internal short circuit or fire.
 Do not put other devices on the camera directly.
 If non professional person, please don’t open camera shell to avoid damage and
electric shock.

 S Sh hi ip pp pi in ng g
 The packing with shock resistance design and test, to make sure camera will not be
damaged accidentally, so please use original packing and carton during shipping.
 Please don’t move camera in extremely hot and cold place, to avoid machine
condensation, affect the lifetime.
 It is strictly prohibited to move the machine with electricity, otherwise the mainboard
will damage.

SunEyes V Series IP Camera Quick Installation User Manual
Page
3
on Page
41
Content
1 Product introduction ................................................................................................................ 5
2 Equipment installation............................................................................................................. 6
2.1 Operating environment ........................................................................................... 6
2.2 Equipment installation ............................................................................................. 6
3 Network setting ........................................................................................................................ 6
3.1 Use installation guide to configurate IP Camera ..................................................... 6
3.2 access to ip camera .................................................................................................. 8
3.3 Configurating manufacturer’s DDNS to access the camera ................................. 10
3.3.1 Port forwarding .............................................................................................. 10
3.3.2 DDNS ............................................................................................................... 11
3.3.3 Manufacturers domain name visit ................................................................ 12
3.3.4 Third party dynamic domain name visit ...................................................... 13
3.4 Mobile Access ......................................................................................................... 13
3.5 Mobile phone software visit .................................................................................. 13
3.6 WIFI Setting ............................................................................................................ 13
3.7 VLC Streaming media player monitoring .................................................... 15
4 Function setting ..................................................................................................................... 18
4.1 Monitor ................................................................................................................... 18
4.1.1 Main Menu ...................................................................................................... 18
4.1.2 Video playing zone ......................................................................................... 18
4.1.3 Monitoring ...................................................................................................... 19
4.1.4 Multi-Device Window ..................................................................................... 19
4.1.5 Browser SD card ............................................................................................. 19
4.1.6 Capture ........................................................................................................... 19
4.1.7 Record ............................................................................................................. 19
4.1.8 Playback .......................................................................................................... 20
4.2 Audio/Video setting ............................................................................................... 21
4.2.1 Image setting .................................................................................................. 21
4.2.2 Video setting ................................................................................................... 22
42.3 Audio setting ................................................................................................... 24
4.3 Network setting ...................................................................................................... 25
4.3.1 Network parameter setting ........................................................................... 25
4.3.2 wireless setting ............................................................................................... 26
4.3.3 remote access setting ..................................................................................... 27
4.3.4 platform setting .............................................................................................. 28
4.3.5 ONVIF setting ................................................................................................. 29
4.3.6 P2P setting ...................................................................................................... 29
4.4 Alarm setting .......................................................................................................... 30
4.4.1 External alarm ................................................................................................ 30
4.4.2 Motion detection ............................................................................................ 31
4.4.3 Alarm Linkage ................................................................................................ 31
4.4.4 Alarm time ...................................................................................................... 32

SunEyes V Series IP Camera Quick Installation User Manual
Page
4
on Page
41
4.5 Advance setting ...................................................................................................... 33
4.5.1 User management .......................................................................................... 33
4.5.2 Timing capture ............................................................................................... 33
4.5.3 Timing record................................................................................................. 34
4.5.4 Email ............................................................................................................... 34
4.5.5 FTP setting ...................................................................................................... 35
4.5.6 PTZ setting ...................................................................................................... 35
4.6 System setting ........................................................................................................ 36
4.6.1 time setting ..................................................................................................... 36
4.6.2 Initial setting ................................................................................................... 37
4.6.3 Equipment information ................................................................................. 38
5 FAQ .......................................................................................................................................... 39

SunEyes V Series IP Camera Quick Installation User Manual
Page
5
on Page
41
1 Product introduction
IP Camera is a product based on embedded web server. It has multi-function image effect.
It is an indepent installation monotoring system, built-in CPU and web serrver, transmit high
quality image through internet.
IP Camera can view images and control by web browser on PC or notebook remotely
through LAN or internet. No matter in wired or wireless network environment, simple
insatallation and interactive web broswer makes IP Camera works well. With multi alarm
tools, it also can inform users take action when abnormal conditions. Usually used in stores,
shops, schools, factories, families, and other places.
IP Cameras can support mobile phone remote view and control PTZ.
Before installation, pls check if all is complete. If the packing bad, please contact
dealers.
Except a IP Camera, the packing should contain:
 1pc power adaptor
 1pc CD
Note 1: Before opening the package, please read the manual carefully, and make sure all
goods are the same as listed in manual, checking if the bottom code labels on machine is
good.
Note 2: If need machine with wifi function, please choose model with /w. It has built-in wifi
module, and equip with antenna.

SunEyes V Series IP Camera Quick Installation User Manual
Page
6
on Page
41
2 Equipment installation
2.1 Operating environment
Operating system: Windows 2000/2003/XP/vista/7
Network protocal: TCP/IP
PC Client: P4/128M RAM/40GHD/ video card support convergent divergent, Dirict X8.0 or
above
2.2 Equipment installation
1. Connect the IP Camera into your network or use crossed net cable connected to PC
directly
2. Connect DC5V power supply
3. If network connect normally, within 5 seconds, the lamp(orange) in network interface will
light up, data indicator lamp(green) will flash, then IP Camera connection finished physically.
3 Network setting
Network connection diagram
3.1 Use installation guide to configurate IP Camera
1) Connect the IP Camera to network or PC through net cable, then start the camera with
electricity, as shown in the above.
Note: If the IP Camera connect to PC directly, you should use manual allocation IP
address of PC, and the IP address of Camera must in the same network segment as

SunEyes V Series IP Camera Quick Installation User Manual
Page
7
on Page
41
PC that can access to the Camera.
2) Upon IP Camera started, find “search tool”from CD and install, after finished, click
shortcut “search tool”on destop, as shown in below:
3) Click “Next”, popup below image:
select the device, then click “Next”, see below interface:

SunEyes V Series IP Camera Quick Installation User Manual
Page
8
on Page
41
4) Set up parameter, then click “Next”,after see below image, click “finish”to exit
installation guide.
3.2 access to ip camera
1） Please enter into http://192.168.1.88 on IE, then type in user name: admin, password:
admin, as shown in below:

SunEyes V Series IP Camera Quick Installation User Manual
Page
9
on Page
41
2） click “confirm”, then you can see below:
3)click “PC view”, as shown below:

SunEyes V Series IP Camera Quick Installation User Manual
Page
10
on Page
41
4)click “download Active X”, popup below image, then click “run”(please don’t use “thunder”,
using IE browswer)
5）After Active X installation finished, click “real-time view”, then you can see below interface:
3.3 Configurating manufacturer’s DDNS to access the camera
3.3.1 Port forwarding
If visit IP Camera from WAN, you must do port forwarding on the router. Take Netgear
router for example.

SunEyes V Series IP Camera Quick Installation User Manual
Page
11
on Page
41
Operation Steps:
After login the interface of the router，choose “Port Forwarding”;
Choose “Add custom Service” ;
Input IP camera port;
Input IP camera IP address，click “Apply”（the http port and ip address should be the same as
figure 4 which set by you own).
Note: Different router has different settings for port-forwarding; please kindly follow your
router guide to do the port-forwarding.
After the port-forwarding is done, you could view the IP Camera from WAN now.
3.3.2 DDNS
Manufacturer's Domain name：
Device manufacturer has established a DDNS, and allotted a dynamic domain name to
every device, the domain name has been integrated into devices when producing. For
example, enter domain name , the browser will connect the device and display the IP

SunEyes V Series IP Camera Quick Installation User Manual
Page
12
on Page
41
address.
Note: dynamic domain name by manufacturer manufacturer provides the user name
and password
Third Part Domain Name:
User can also use third part DDNS, such as www.dyndns.com User must apply a free
domain name from this website and fill the info into the below blanks (Figure 12) and save
the settings. Then the domain name can be used.
3.3.3 Manufacturers domain name visit
The router configuration parameters and camera parameters, in the browser to enter
your user demo. Hipcam. org directly to the camera, such as manufacturers with user name:
99 a1234b, the domain name for 99 a1234b. Hipcam. Org
Note: use the manufacturer domain name visit camera, doesn't need an HTTP port,
input domain name only can access

SunEyes V Series IP Camera Quick Installation User Manual
Page
13
on Page
41
3.3.4 Third party dynamic domain name visit
the product also can support third party ddns, such as oray
Note:the third party ddns realizes the function by analytical methods,after inputting the
ddns in browser,the characers would not change,if the port is not 80,need to add a colon and
port behind the ddns such as：http://demo.dyndns.org:1024
3.4 Mobile Access
In the mobile phone browser input domain name:
http://viewipcam.dyndns.org/mobile.html 或http://viewipcam.dyndns.org/wap.wml
If the camera HTTP port is changed, please input:
http://viewipcam.dyndns.org：端口/mobile.html 或http://viewipcam.dyndns.org：端口
/wap.wml
3.5 Mobile phone software visit
1.support android 、Iphone system
2.Go to the【AppStore】for Iphone, search “hi player”
Note: it is recommended that in "video parameters" page code of the time flow
rate for 64 K code modify the following, frame rate set to 8 frames the following, if set
too large, mobile phone decoding slow, can lead to phone the image to see a delay
3.6 WIFI Setting
1、 Through the local area network configuration IP Camera network parameters,makes
a pc can access IP Camera;
2、 Configuration wireless parameters of the wireless router
3、 Configuration wireless parameters of the IP Camera

SunEyes V Series IP Camera Quick Installation User Manual
Page
14
on Page
41
Note: if the router to wireless set not set password, it does not need to enter the
password and click "check"
Pop-up is shown below, says WIFI is set correctly, click on the "application" save
Settings, if tip connection, please enter a password, and then click on the "check"
4、 Disconnect IP Camera after,power off to restart IP Camera,Can use WIFI connection
Note: after open WIFI function, if need to use wired connection way, must first
network cameras connected to the Internet, and then to the web in cameras electric
start, or network cameras into the wireless connection to state

SunEyes V Series IP Camera Quick Installation User Manual
Page
15
on Page
41
3.7 VLC Streaming media player monitoring
This camera supports RTSP streaming, here you can view the camera using VLC
player.
For example:
IP: 192.168.1.88
RTSP Port number: 554
Here I can enter one of the following URLs in the VLC.
First stream:rtsp://192.168.1.88/11
Second stream:rtsp://192.168.1.88/12
TCP：
1.Open VLC Player, click “media”--- “open newtork streaming”, or press
combination key “Ctrl+N”, as shown in below:
2.Inputting URL Address: RTSP://IP:port/11(first stream)
RTSP://IP:port/12(second stream), RTSP://IP:port/12(third stream) (the
port is RTSP Port, default is 554, can be omitted)

SunEyes V Series IP Camera Quick Installation User Manual
Page
16
on Page
41
Note: RTSP using TCP connection need to type in “ :rtsp-tcp ”(do not include
“”) in editing options.
UDP：
1.Open VLC Player, click “media”--- “open newtork streaming”, or press
combination key “Ctrl+N”, as shown in below:
2.Inputting URL Address: RTSP://IP:port/11(first stream)

SunEyes V Series IP Camera Quick Installation User Manual
Page
17
on Page
41
RTSP://IP:port/12(second stream), RTSP://IP:port/12(third stream) (the port
is RTSP Port, default is 554, can be omitted)
If you need RTSP monitoring by public network, you should mapping below
ports:
TCP 554 RTSP port
UDP
554 RTSP port
6600 UDP port
6602 Audio port

SunEyes V Series IP Camera Quick Installation User Manual
Page
18
on Page
41
4 Function setting
4.1 Monitor
4.1.1 Main Menu
All page includes two types of menu bar: including real-time monitoring and
parameter setting; real-time monitoring is to display camera images and related
opertions function keys; parameter setting is to set related parameter of camera.
4.1.2 Video playing zone
Video playback area is consistent with video resolution, the greater the
resolution, the greater the playing area. If you double click play area, it will
display full screen, double click again, recover to original size.
If you set motion detection, when detecting a moving object is this area, it
will display a pane to warn users abnormal.
Under play area, it has statu bar, as shown in below:
1） :Current status of IP Camera
2） :Audio playback button: It can playback voice on computer that
captured by device, click again, the function will be shut down.

SunEyes V Series IP Camera Quick Installation User Manual
Page
19
on Page
41
3） :Audio sending button: It can send voice to the device that captured
by computer, click again, the function will be shut down.
4） File saving location setting:you may set the location for recording
and capturing,the default location is D:/record
4.1.3 Monitoring
You can set window monitoring size as requirement, divided into 3 kinds:
first stream: 720P (1280*720); second stream: VGA (640*352); third stream:
QVGA(320*176). You also can choose first stream, second stream, and third
stream monitoring image.
4.1.4 Multi-Device Window
The firmware inside the camera supports up to maximum of 9 cameras being
monitoring at the same time. You can add other cameras in multi-device setting
4.1.5 Browser SD card
If you insert the SD card, click on the SD card button in the pop-up
page will list the contents of the SD card, as shown;
4.1.6 Capture
Click the capture button, it will save the current playing images as pictures to seting path.
4.1.7 Record
Click Video button, it will record the video stream and audio stream to setting path of local
computer. When recording, the statu bar in video playback area will show it is redording.

SunEyes V Series IP Camera Quick Installation User Manual
Page
20
on Page
41
Click record button again, it stops recording.
4.1.8 Playback
Click playback button, Will pop up a player, as shown, can play recorded on the
local hard disk and SD card video.