EtroVISION EV6250A Series User manual

EV6250A Series
Speed Dome IP Camera
User’sManual Ver. 6.1

About This Guide
Model
lEV6250A
Before Using the EV6250ASpeed Dome IP Camera
üCheck PC requirement
üCheck OS platform requirement
üInstall EtroStation™ 3.0 software before you start using the video
server.
üRead special and important precautionary information.
üBasic knowledge of network setup and configuration will be helpful.
Icon Descriptions
Notes: This icon represents a tip for operation.
Caution: This icon stands for an action that probably impairs the
operation.
Warning: This icon stands for an action that can cause damage to the
operation.
Disclaimer
© 2007 Etrovision Technology. All rights reserved.
Etrolink™ & AnyUSB™ are trademarks of Etrovision Technology; other
product or service names mentioned herein are the trademarks of their
respective owners. Information contained in this document may be
superseded by updates. No representation or warranty is given and no
liability is assumed by Etrovision Technology with respect to the accuracy or
use of the information, or infringement of patents or other intellectual
property rights. No licenses are conveyed, implicitly or otherwise, under any
intellectual property rights.

TABLE OF CONTENTS
1. PRODUCT OVERVIEW......................................................................5
Package Checklist ....................................................................................5
Look......................................................................................................6
Connector...............................................................................................6
Operational Instructions ............................................................................7
2. SETTING AND INSTALLATION..........................................................8
Product CD .............................................................................................8
Power on IP Camera .................................................................................8
Connect to Network..................................................................................8
Connect I/O ............................................................................................8
Enable Audio Function...............................................................................9
Easy Installation ......................................................................................9
Bracket Installation ..................................................................................9
3. USING EV6250A FOR THE FIRST TIME ...........................................16
Before You Install Software ...................................................................... 16
Language Support.................................................................................. 16
Install EtroStation™ 3.0 .......................................................................... 16
Browser for Live Viewing and Video Settings ............................................... 16
Factory Setting –Initial IP Address............................................................ 16
Network Domain.................................................................................... 17
Use EtroScan™ ...................................................................................... 17
Change Network Setting via EtroScan™ ..................................................... 19
4. ACCESS IP CAMERA .......................................................................20
Browser................................................................................................ 20
Initial Username & Password .................................................................... 21
Control Panel Settings............................................................................. 22
5. WEB INTERFACE SETTINGS –BASIC ..............................................24
Status.................................................................................................. 24
Network ............................................................................................... 25
Video ................................................................................................... 30
Event Rule ............................................................................................ 33
Date & Time .......................................................................................... 36

OSD .................................................................................................... 38
6. WEB INTERFACE SETTINGS -EXPERT.............................................39
Port ..................................................................................................... 39
DDNS .................................................................................................. 39
SMTP/FTP............................................................................................. 40
Trigger Setup ........................................................................................ 42
Pre/Post Setting..................................................................................... 46
Account................................................................................................ 46
Security ............................................................................................... 48
Maintenance.......................................................................................... 50
7. FACTORY DEFAULT........................................................................52
8. REBOOT........................................................................................53
9. LOGOUT........................................................................................54
10. ETROLINK?CONFIG PORT -EIRST EXPERIENCE…………………………..55
OS Requirement .................................................................................... 55
NO Software installation Required............................................................. 56
Steps for Using EtroLink™ Config Port (Windows XP OS) ............................... 56
11. TROUBLESHOOTING......................................................................60
What If Quickconfig does not Auto run? ..................................................... 60
12. SPECIFICATIONS ..........................................................................61
13. APPENDIX……………………………………………………………………………….62

1.PRODUCT OVERVIEW
EV6250Asupport dual streams simultaneously.
Combination options include:
Stream 1 Stream 2
H.264 M-JPEG
H.264 MPEG-4
H.264 H.264
M-JPEG MPEG-4
M-JPEG H.264
M-JPEG M-JPEG
MPEG-4H.264
MPEG-4M-JPEG
MPEG-4MPEG-4
Note: If users assign MPEG-4 for both Stream1 and 2, the image will be unable
to reach real-time performance. M-JPEG for both Stream 1 and 2 leads to
the same result. This is system limitation.
lPackage Checklist
ØEV6250A IP Speed Dome Camera x 1
ØPower Adapter x 1
ØUSB Cable x 1
ØProduct CD x 1

lLOOK
Indoor Housing Outdoor Housing
l
l
l
l
l
l
l
l
l
lConnectors
1Connect Power Adapter
2Audio Input
3Audio Output
4Video Output
5RJ-45 Ethernet Connector
6Digital Input & Digital Output

lOPERATIONAL INSTRUCTIONS
1. Follow the operational instructions for correct use.
2. Please don’t place the product on unstable desk or bracket.
3. Please avoid any liquid permeate inside of the machine in case damage
the product.
4. Before wiring, please follow all electronic safety standards, and using
the original attached power supply adapter.
5. Do not let the camera aim at sun or other lighting objects no matter the
camera is operating or not, otherwise it might damage the CCD camera
permanently.
When the product is out of order, please do not try to fix it by yourself, please
refer to the trouble shooting section of this instruction to figure out the
problems in advance. If the problem is not found, please contact us or our
authorized dealers directly.

2.SETTING AND INSTALLATION
Note:
lConnect EV6250A to your network by using a standard Cat-5 cable.
lConnect the video output of your camera with video in of video server, using
standard 75O coaxial cable with BNC type connector.
lConnect speaker and active microphone to Audio In / Out.
lProduct CD
Product CD in the package contains:
üEtroStation™ 3.0 NVR management software
o16CH Live View / Recording / 4CH Playback
üEtroStation™ Pro 3.0 NVR management software
o36CH Live View/Recording/4CH Playback
üUser’sManual
lPower on IP Camera
Use the power adapter, provided in the package, to power on the IP
camera. The adapter should be connected to 110v~22Ov AC socket.
lConnect to Network
Connect EV6250A and network hub/switch via a standard CAT5 Ethernet
cable and RJ-45 socket. Please pay attention that the PC must be on the
same network domain with the IP camera.

lConnect I/O
Users have to make pin-to-pin correctly to enable this function.
lEnable Audio Function
nThe video flicker may occur when enabling or disenabling audio
in and audio out. The situation normally lasts for a second.
lEasy Installation
Step 1: Use the special screw driver to take off the burglar-proof screw.
Prepare the screws to mounting on the suitable place.
Caution: Please be sure to follow all the steps of the instructions. Wrong
installation may damage the product.
lBracket installation
-Outdoor 90° Corner Adapter:
1. Combine two brackets, and use the spanner to fix the screw.
2. Turn the screw to tighten the brackets and power box.

3. Complete the assembly
-Pole Mount Bracket:
1. Fixed the bracket on the rear of power box
2. The assembly will be done after the stainless ring is hooped
3. Pendant Mount Bracket:
4. Fixed the iron tube at the above cover of power box
5. Fixed the above cover to the power box namely completes the assembly

lOutdoor Housing installation
The installed spot must and can hold the product firmly, in case the
image shaken while the camera operates.
1. Put the cable tube into the power box, and screw it
2. Fixing power box on the wall
3. Before assembling housing and bracket, please paste on the
water-repellent tapes. Then revolve the housing from left to right for
fixing
4. Insert combo cable intobracket to let it pass to housing, then revolve the
housing from left to right for fixing

5. Using hexagon screw driver to fix the housing and bracket
6. Install combo cable,unscrew the bottom screw first
7. Carefully and correctly connect 30-pin main connector, 2-pin video
connector and 2-pin power connector as following pix showed
Proof thinking device30-pin connector

8. Hook up the safety buckle, and screw the two screws to fix the power box
lCamera Installation
1. Aim the camera plug to the bottom socket to connecting
2. You can also follow the triangle in front of camera and aim at the bottom
screw to fixing
Connect video connector with J13Connect power connector with J12

3. After the camera is installed, please turn the camera and fixing the two
side screws.
4. Finally cover up the smoked cover to accomplish the installation. Please
be sure hands are clean while cover up, or it may dirty the cover. It’s
recommended to tear off the protect membrane after installation is
finished, or wear on gloves
lIndoor Housing installation
1. Outer housing fixing as below, click down the iron slice then pull it up

2. Before install inner housing, please hook the safety lock of outer housing
on the fixing socket of inner housing, in case of installation accidents
3. Please fix the three screws on the side before install the camera
4. Combo cable and camera installation same as steps mentioned above in
outdoor part

3. USING EV6250A FOR THE FIRST TIME
lBefore You Install Software
üPlease check PC OS platform. Microsoft Windows 2000 or
Windows XP is capable of running EtroStation™ 3.0 software.
üPLEASE read EtroStation™ 3.0 user’s manual before installation.
lLanguage Support
üEnglish
lInstall EtroStation™ 3.0
User can easily find the specific IP camera on the network via this
software.
lBrowser for Live Viewing and Video Settings
Microsoft IE browser version 6 or higher is recommended.Currently
Mozilla Firefox and others are not compatible.
lFactory Setting –Initial IP Address
Default IP Address: 192.168.1.2
Gateway: 192.168.1.1
Subnet Mask: 255.255.255.0

lNetwork Domain
Alter the IP address of the PC to the same domain of default value
(192.168.1.2). Users may alter the IP address of the IP camera to the
same of PC via EtroScan™. Please refer to page 45 to check detailed
information.
lUse EtroScan™
The software allows users easily and quickly find the specific IP camera on
the network. Run EtroStation™3.0 setup and install the two applications.
The following is the brief instruction:
Select EtroScan™from the start menu.User can see the following image:

Press Scan button to check the IP and MAC address list. Press Clear
Table button and press Scan again to refresh.
You will find the list of IP and MAC address listed. To indentify your IP
camera you can flip over the IP camera and check the label for MAC
address on the bottom side.
Note: Please pay attention that a completed RMA form must contain the serial
number of the product. For more information, please refer to our
website.
Press Scan to automatically find onlineVideo Server
or
Full Function of Video Server on the network domain

lChange Network Setting via EtroScan™
Double click on a specific IP address; the setting page will pop up. Users
may alter some basic network parameters in this page.
Be sure to press APPLY to enable the new setting
Within 10 seconds, the dialog box would disappear.This indicates that the
new settings are deployed. After typing in the new IP address, user may
close the setting page and wait for 45 seconds. It takes 45 seconds to
restart the system. After rebooting, user may press Scan to check the
new IP address.
Note: “DOUBLE Right Click Function”àDouble right click on a specific IP
address on the list; user can quickly open the live viewing browser
page.
Press Exit to quit.
Double click

4. ACCESS IP CAMERA
lBrowser
ØOpen an IE browser
ØType in the IP address of videoserver that you found via EtroSacn™.For
example: 192.168.1.2 (default IP address)
ØA popup login dialog box will automatically display.
ØInitial username and password (case-sensitive):
Login: root
Password: pass
Press OK button to access to the live viewing web page.
root
pass