Sunjoy Chateau 9pc Dining Set-Table L-DN1080SAL-D User manual

Chateau 9pc Dining Set-Table
Item# L-DN1080SAL-D
Congratulations on your purchase of our SUNJOY Chateau 9pc Dining Set-Table. Our clear,
easy to follow, step-by-step instructions will guide you through the assembly process from
start to finish.
WARNING:
THIS UNIT IS HEAVY! For safety, DO NOT assemble this item alone. 4 people are recommended
for safe assembly.
Keep all children and pets away from assembly area. Children and pets should be supervised
when they are in the assembly area of the Table.
Do not assemble less than 6 ft / 1.8 m from any obstruction such as a fence, garage, house,
overhanging branches, laundry line or electrical wires.
Some parts may contain sharp edges. Wear protective gloves.
When assembling and using this product, basic safety precautions should always be followed
to reduce the risk of personal injury and damage to equipment. Please read all instructions
before assembly and usage.
Prepare a carpet or something else to protect the table top during assembling.
For outdoor use only. Install on level ground. Check all bolts for tightness before and during
usage.
IMPORTANT
Please take time to read these instructions thoroughly and follow each step carefully for safe and easy
operation. Keep this manual for future reference.
For technical assistance on assembly or replacement parts, call Sunjoy Industries at 1-866-578-6569
from 8:30AM to 5:30PM EST, or email us at [email protected], or visit www.sunjoydirect.com for
assistance.

No Description Qty
A Table Top 1
B Leg 4
C Door Panel 2
D Side Panel 2
E Bottom Panel 1
F Umbrella Hole Cap 1
GHandle
(Pre-assembled on C)
2
AA Bolt M6x20 8
BB Bolt M6x30 4
CC Bolt M8x35
8
DD Bolt M5x15
(Pre-assemble on Handle)
2
EE Spring Washer M6 12
FF Flat Washer M6 12
GG Spring Washer M8 8
HH Flat Washer M8 8
II Hex Key M6 1
JJ Wrench M8 1
KK Adjustment Leg Pad
(Pre-assembled on B)
4
Step 1: Match the Hole on Door Panel (C)
with Side Panel (D), then lock them on Leg
(B) by Bolt (AA), Spring Washer (EE),Flat
Washer (FF) and Hex Key (II). Don’t lock
them tightly.
Step 2: Lock the rest Door Panel (C) and Side
Panel (D) on Leg (B) the same as Step 1.
Don’t lock them tightly.
Parts List

Step 3: Match the Hole on Bottom Panel (E) with
Leg (B), and fix them by Bolt (BB), Spring
Washer (EE),Flat Washer (FF) and Hex Key (II).
Don’t lock them tightly.
Step 4: Turn over the Table Top carefully and put
it on Carpet to protect the Table Top. Match
the Hole on Leg (B) with Table Top (A), and fix
them by Bolt (CC),Spring Washer (GG) and Flat
Washer(HH). Then tighten all the Bolts by
Wrench (JJ).
Step 5: Turn over the assembled Table. Put
Umbrella Hole Cap (F) on Table Top (A).
Adjust the Leg Pad to stabilize the Table.
Assembly completed!

Care & Maintenance
Before using, clean the table completely with a soft dry towel. When not in use, wipe free of
any dirt or loose objects, wash with a mild solution of soap and water; rinse thoroughly and
dry completely.
Do not use strong detergent or abrasive cleaners. When not in use, recommend the use of
patio furniture covers.
Steel components of garden accessories and furniture are treated with rust inhibiting paint.
However, due to the nature of steel, surface oxidation (rusting) will occur if this protective
coating is scratched.
To minimize this condition, it is recommended that care be taken when assembling and
handling the product, in order to prevent the paint from being scratched.
Like all topical coatings, cleaning should be with a non-abrasive neutral pH cleaner, you may
call the toll free number 877-738-7325 to obtain it from V-SEAL Sealers.
Limited Warranty:
Sunjoy Industries warrants to the original purchaser that this item is free from defects in
workmanship and materials for a period of 1 year from the date of purchase, provided the
item was factory-sealed at the time of purchase and is maintained with care and used only
for personal, residential purposes. Should any manufacturing defect arise within this
warranty period, Sunjoy Industries will repair or replace (at our option) any defective
merchandise upon proof of purchase; however, transportation and delivery costs, as well as
payments to a third party for assembly or disassembly of the item, remain the responsibility
of the purchaser. A purchaser of an "open box," previously-returned, or "clearance" item, as
well as original purchasers outside of the warranty period, may obtain replacement parts
from Sunjoy Industries for products in current production, at nominal cost.
Exclusions:
Items used for commercial, contract, or other non-residential purposes, or items damaged
due to acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion
or rusting of hardware is not covered. Proof of purchase (dated register receipt) is required
for warranty claims. Warranty is to the original purchaser and is non-transferable. Any
replacement of warranted items will be in the original style and color, or a similar style and
color if the original is unavailable or has been discontinued. As some states do not allow
exclusions or limitations on an implied warranty, the above exclusions and limitations may
not apply. This warranty gives you specific rights, and you may also have other rights, which
vary from state to state.