Sunjoy Boulevard Living Arch Design L-BG014PST User manual

Sunjoy L-BG014PST Boulevard Living Arch Design Steel Bridge
Owner’s Manual
IMPORTANT
Thank you very much for choosing Sunjoy Group.
Please take time to read these instructions thoroughly and follow each step carefully for safe and easy
operation. Keep this manual for future reference.
We would like to hear from you with any comments or suggestions. You can call us toll-free at
1-866-578-6569 from 8:00 a.m. EST to 8:00 p.m. PST. You can also send the email to
[email protected] or visit www.sunjoyonline.com to get tech. assistance or to place your
replacement part order form.

Cautions:
1. Repeated assembly can weaken the locking ability of the nuts. Periodically check all bolted
connections on your furniture to make sure they are tight and secure. Retain these instructions
for future reference
2. Keep all children and pets away from assembly area. Children and pets should be
supervised while product is being assembled.
3. Do not over tighten any of the nuts as this may DAMAGE the threads. Tighten each nut
firmly.
4. Please read instructions prior to assembly. It is recommended to use two people for
assembly
5. Ensure that the nuts are not cross-threaded, hand tighten before commencing.
6. Always use on level ground, ensuring leg remains in contact with the ground.
7. Ground stakes are included for use on dirt and grass. Ensure surface is level for secure
staking.
8. For outdoor use only. Keep instructions for future reference.
9. Before using, clean the chair completely with a soft dry towel.
10. For ease of cleaning and safety, do not assemble less than 6 ft / 1.8 m from any obstruction
such as a fence, garage, house, overhanging branches, laundry line or electrical wires.
Assembly Instructions:
Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start to
finish.
Inside this carton you will find enclosed hardware and parts listed above. Please check the contents
of this package to ensure you have received all of the required parts, and that there is no breakage.
You need a screwdriver (not include).
Parts identification: For ease of identification, all parts are labeled to correspond to the Step number
in which the part is used

No. Description Qty Image
A Bridge Rail 2PCS
B Bridge Surface 2 PCS
C Side Rail 2PCS
D Middle Rail 1PC
E Decorative Top 4PCS
F Foot Plate 4PCS
No. Description Qty Image
a M8x20 Bolt 12 PCS
b M8 Spring Washer 18 PCS
c M8 Flat Washer 18PCS
d M8 Nuts 6PCS
e M6x15 Bolt 24PCS
f M6 Flat Washer 24PCS
FF 180mm Ground
Stake 8PCS
W M8 Wrench 1PC
Step 1: Attach Foot Plate (F) to Bridge Rail (A) with 4 Bolts (e) and 4 Flat Washers (f). See Fig. 1-1. Repeat
for the other 3 Bridge Rail Posts. Please note that the holes should be facing out for ease of installing
stake/expansion bolts as illustrated in Fig. 1-2. Fully tighten hardware.
Parts List Hardware Pack

Step 2: Insert the bolt under Side Rail (C) to the
pre-attached hole on the leg of Bridge Rail (A) and
fasten with Flat Washer (c), Spring Washer (b) and
Nut (d). Secure Bridge Rail (A) with Bolt (a), Spring
Washer (b) and Flat Washer (c). Fully tighten
hardware. Repeat for other 3 Bridge Rail Posts. See
Fig. 2.
Step 3: Attach Middle Rail (D) to Bridge Rail (A)
with Flat Washer (c), Spring Washer (b) and Nut (d).
Fully tighten hardware. Repeat for opposite end of
Middle Rail. See Fig. 3.
Step 4: Attach Bridge Surface (B) to Middle Rail
(D) and Side Rail (C) with Flat Washer (c), Spring
Washer (b) and Bolt (a). Do not fully tighten
hardware. The side with the label (OUT) should
attach to Side Rail (C). See Fig. 4.
Step 5: Attach Decorative Top (E) to Bridge Rail
(A) with Bolt (e) and Flat Washer (f). See Fig. 5.
Tighten all bridge bolts securely. Alternate
tightening all bolts so that all sides are tightened
evenly
Step 6: Secure the bridge by insert ground stake g
into the ground through foot plate (F).

Care & Maintenance:
Our steel components for garden accessories and furniture are treated with rust inhibiting paint that
protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur
once
these protective coatings are scratched. This is not a defect and thus not covered by the warranty.
To minimize this condition, we recommend care when assembling & handling the product to prevent
scratching the paint. Should any scratching or damage occur, we recommend immediate touch-up
with
rust inhibiting paint.
Surface rust can also be easily removed with a very light application of common cooking oil. If
surface oxidation (rusting) occurs and if no measure is taken to prevent this, the oxidation may start
dripping onto deck or patio and caused damaging stains, which may be difficult to remove. This can
be prevented if the above-mentioned measures are taken to keep the product from oxidizing.
Limited Manufacturer’s Warranty:
This limited warranty is extended to the original purchaser and applies to defects in materials and
workmanship of your item provided the item is maintained with care and used only for personal,
residential purposes.
The item is warranted to be free from defects in material or workmanship for a period of One (1)
Year. We don't reimburse for transportation or delivery costs, or compensate the individual or any
outside party for assembling or disassembling the product.
Exclusions:
Items used for commercial, contract, or other non-residential purposes, or items damaged due to
acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of
hardware is not covered. Proof of purchase (dated register receipt) is required for warranty claims.
Warranty is to the original purchaser and is non-transferable. Any replacement of warranted items
will be in the original style and color, or a similar style and color if the original is unavailable or has
been discontinued.As some states do not allow exclusions or limitations on an implied warranty, the
above exclusions and limitations may not apply. This warranty gives you specific rights, and you
may also have other rights, which vary from state to state.
Made in China