Sunjoy L-FT253PST-6 User manual

Assembly Instructions
Item: L-FT253PST-6
Slate Fire Pit
WARNINGS:
•Fire pit is intended for outdoor use only. Do not use on wooden decks.
•Fire pit is intended to burn wood logs only. Do not burn coal, leaves or other combustible materials in the fire pit.
•Not for use by children. Keep children & pets away from fire pit.
•Fire pit is hot. Use with caution. Never touch hot fire pit with bare hands.
•Never leave burning fire pit unattended and always extinguish fire completely before leaving the fire pit.
•Do not use near flammable or combustible objects or materials.
•When the fire pit is in use, the handle on the mesh screen can reach extreme temperatures that will cause injury
to an unprotected hand. Please use poker or an appropriate heat resistant glove or pad when handling.
• DO NOT use this fire pit as a cooking appliance. This fire pit is not designed to be used for grilling food.
Limited Warranty: The item is warranted to be free from defects in material or workmanship for a period of 6
Months. However, we don't reimburse for transportation or delivery costs, or compensate the individual or any
outside party for assembling or disassembling the product. This limited warranty is extended to the original
purchaser and applies to defects in materials and workmanship of your item, provided the item is maintained with
care and used only for personal, residential purposes.
Meijer.com

A
B
DD E
D
BB
CC
D
E
G
H
A
B
C
F
I
Parts List
Step 1：Step 2：
No. Description Qty
1retfiLA
B Mesh screen 1
C Grate 1
D Fire bowl 1
E Ash tray 1
F Table top 1
G Connector 4
4geLH
I Poker 1
AA 1/4”-20*0.8 Bolt 20
BB 3/16”-24*0.4 Bolt 3
CC 3/16”-24 Nut 3
DD 1/4”-20 Nut 1
EE D6.5 Flat washer 20
FF 3/16”-24/1/4”-20 Wrench 1
Connect Lifter (A) and Mesh screen (B) by 1pc
1/4”-20 Nut (DD), fully tighten by 3/16”-24/1/4”-20
Wrench (FF),
Connect Fire bowl (D) and Ash tray (E) by 3pcs
3/16”-24*0.4 Bolt (BB) and 3/16”-24 Nut (CC),
fully tighten by 3/16”-24/1/4”-20 Wrench (FF),
Meijer.com

D
B
C
F
I
G
H
EE
AA
Step 3：Step 4：
Step 5：
Your Fire pit is ready for use now.
Printed in China
AA
H
F
EE
Reverse Table top (F), connect Leg (H) and Table
top (F) by 4pcs 1/4”-20*0.8 Bolt (AA) and D6.5
Flat washer (EE), do not fully tighten.
Put Fire bowl (D), Grate (C), Mesh screen (B)
onto Table top (F) in-order.
Connect Leg (H) and Connector (G) by 4pcs
1/4”-20*0.8 Bolt (AA) and D6.5 Flat washer (EE),
do not fully tighten.
Meijer.com