Sunjoy A701000401 User manual

1

E 
E 













`
No. Part Number Description Qty
A P005000227 Base 1 1
B P005000228 Base 2 1
C P005700748 Post 1
D P005300034 Base beam 1 4
E P000501219 Base beam 2 4
F P002200219 Sandbag 2
G P006900032 Base protector 1
H P007800050 Head 1
I P005700746 Upper post 1 1
J P00510033500 Knob(Pre-assembled) 2
AA H010010008 Bolt M8x 20 4
BB H050010051 Washer M8 4
CC H090010012 Wrench M8 1
Please check to make sure you have the following:
Assembly Instructions
3 HEAD UMBRELLA W/WD TRANSFER
Item#: A701000401
AA BB CC
H
G
I
F
E E
D
D
D
D

F
C
A B

2























PREPARATION
Please read instructions thoroughly before assembly. Familiarize yourself with the inventory of parts and the accompanying illustrations
to assure safe and proper assembly.
·Remove all parts from packaging. Examine all packing material before discarding, shortages may occur from parts left in the packing
material. Check the parts quantity mentioned on the parts list.
·Spread out parts on a soft level surface to avoid scratching the parts.
·Assemble the item on soft, non-abrasive surface to avoid damage to the item. Item is heavy. Use care when handling.
·May require two adults for safe assembly.
·Kee
p
children awa
y
from assembl
y
area.
Fig.1: Put base 2 (B) onto the base 1 (A) as fig.1.
Fig.2: Fix post (C) to assembly base 1 & 2 (A& B) with bolts (AA), washer (BB) by wrench (CC).
Fig.3: Fix base beam 1 (D) to assembly base as fig.3.
Fig.4: Fix base beam 2 (E) to assembly base as fig.4. The umbrella base
foundation is ready.

3










































Fig.5: For proper stability of your umbrella. The recommended minimum weight of the sand to be placed into each
sand bag (F) is 67.5 lbs for a total of 135 lbs.
Fig.6: Put the sand bags (F) into the foundation and then cover the base cover (G).
Fig.7: Fix the base protector (G) by the metal hook.
Fig.8: Insert the upper post (I) into the head (H).
Fig.9: Insert the assembly umbrella head into the assembly umbrella base and fix them by the screw knob.
Fig.10: To open the umbrella, turn the crank clockwise until it
is fully opened. To close, turn the crank counterclockwise
until it straightens and continue cranking until the umbrella is
fully closed..
Hook