Sunjoy L-BS864SAL User manual

Sunjoy L-BS864SAL Best Choice Products Cast Aluminum Patio
Bistro Furniture Set
Owner’s Manual
IMPORTANT
Thank you very much for choosing Sunjoy Group.
Please take time to read these instructions thoroughly and follow each step carefully for safe and easy
operation. Keep this manual for future reference.
We would like to hear from you with any comments or suggestions. You can call us toll-free at
1-866-578-6569 from 8:00 a.m. EST to 8:00 p.m. PST. You can also send the email to
[email protected] or visit www.sunjoyonline.com to get tech. assistance or to place your

Cautions:
1. Repeated assembly can weaken the locking ability of the nuts. Periodically check all bolted
connections on your furniture to make sure they are tight and secure. Retain these instructions
for future reference
2. Keep all children and pets away from assembly area. Children and pets should be
supervised while product is being assembled.
3. Do not over tighten any of the nuts as this may DAMAGE the threads. Tighten each nut
firmly.
4. Ensure that the nuts are not cross-threaded, hand tighten before commencing.
5. Take additional care when using this product on hard and polished surfaces.
6. Always use on level ground, ensuring leg remains in contact with the ground.
7. Do not place your chair in wet conditions where there is a risk of rust developing.
8. Ensure to protect the terra cotta tabletop from cracking, breaking when assembling table
legs.
9. Before using, clean the chair completely with a soft dry towel.
10. When not in use, wipe free of any dirt or loose objects, wash with a mild solution of soap
and water; rinse thoroughly and dry completely. Do not use strong detergent or abrasive
cleaners, then store in a cool, dry location away from sunlight.
Assembly Instructions:
Our clear, easy-to-follow, step-by-step instructions will guide you through the project from start to
finish.
Inside this carton you will find enclosed hardware and parts listed above. Please check the contents
of this package to ensure you have received all of the required parts, and that there is no breakage.
Parts identification: For ease of identification, all parts are labeled to correspond to the Step number
in which the part is used

NO. Description Qty Image
A Back 1
B Seat 1
C Leg 4
AA Threaded rod M8 x 25 10
BB Spring washer M8 10
CC Flat washer M8 10
DD Wrench M6/M8 1
FF Nut M8 10
Step 1: Insert threaded rod (AA) into each hole in
bottom of back (A), then connect seat (B) to back
(A) with flat washers (CC), spring washers (BB)
and nuts (FF), as shown in Fig. 1. Do not tighten
all bolts fully at this step.
Step 2: Insert threaded rod (AA) into each
leg-hole in seat (B), then connect legs (C) to seat
(B) with flat washers (CC), spring washers (BB)
and nuts (FF), as shown in Fig. 2. Tighten all the
nuts using wrench (DD).
Parts List- Table
Fig.1 Fig.2
Parts List- Table

NO. Description Qty Image
D Table top 1
E Leg 3
F Ring 1
BB Spring washer M8 3
CC Flat washer M8 3
FF Nut M8 3
GG Bolt M6 x 25 6
HH Threaded rod M8*15 3
II Spring washer M6 6
JJ Flat washer M6 6
Step 3: Attach Ring (F) onto Leg (E) and
tighten them by using Washer (JJ), spring
washers (II), bolt (GG). Do not tighten all
bolts fully at this step.
Step 4: Place the Tabletop (D) upside down on a
soft and clean surface. Insert threaded rod (HH) into
each leg-hole in table-top.And then, attach
assembled Table Legs (E) and Ring (F) on the
tabletop backside, tighten them by using Washer
(CC), spring washers (BB) and nuts (FF), Wrench
(DD)
Fig.3 Fig.4

Care & Maintenance:
Our steel components for garden accessories and furniture are treated with rust inhibiting paint that
protects it from rusting. However, due to the nature of steel, surface oxidation (rusting) will occur
once
these protective coatings are scratched. This is not a defect and thus not covered by the warranty.
To minimize this condition, we recommend care when assembling & handling the product to prevent
scratching the paint. Should any scratching or damage occur, we recommend immediate touch-up
with
rust inhibiting paint.
Surface rust can also be easily removed with a very light application of common cooking oil. If
surface oxidation (rusting) occurs and if no measure is taken to prevent this, the oxidation may start
dripping onto deck or patio and caused damaging stains, which may be difficult to remove. This can
be prevented if the above-mentioned measures are taken to keep the product from oxidizing.
Limited Manufacturer’s Warranty:
This limited warranty is extended to the original purchaser and applies to defects in materials and
workmanship of your item provided the item is maintained with care and used only for personal,
residential purposes.
The item is warranted to be free from defects in material or workmanship for a period of Six (6)
Months. We don't reimburse for transportation or delivery costs, or compensate the individual or
any outside party for assembling or disassembling the product.
Exclusions:
Items used for commercial, contract, or other non-residential purposes, or items damaged due to
acts of nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of
hardware is not covered. Proof of purchase (dated register receipt) is required for warranty claims.
Warranty is to the original purchaser and is non-transferable. Any replacement of warranted items
will be in the original style and color, or a similar style and color if the original is unavailable or has
been discontinued.As some states do not allow exclusions or limitations on an implied warranty, the
above exclusions and limitations may not apply. This warranty gives you specific rights, and you
may also have other rights, which vary from state to state.
Made in China