Sunjoy Renaissance L-GZ542PCO User manual

1
Renaissance Swing
Item# L-GZ542PCO
Congratulations on your purchase of our SUNJOY Renaissance Swing. Our clear, easy to
follow, step-by-step instructions will guide you through the assembly process from start to
finish.
WARNING:
Keep all children and pets away from assembly area. Children and pets should be supervised when
they are in the area of the Swing construction.
Keep assembly area at least 6 feet from any obstruction such as a fence, garage, house,
overhanging branches, laundry line or electrical wires.
Some parts may contain sharp edges. When assembling and using this product, basic safety
precautions should always be followed to reduce the risk of personal injury and damage to the
product. Please read all instructions before assembly and use.
Check all bolts for tightness before use. IMPORTANT - check and tighten bolts often to keep them
secure!
IMPORTANT
Please take time to read these instructions thoroughly and follow each step carefully for safe and easy
operation. Keep this manual for future reference.
For technical assistance on assembly or replacement parts, call Sunjoy Industries at 1-866-578-6569
from 8:30AM to 5:30PM EST, or email us at [e-mail], or visit www.sunjoydirect.com for
assistance.

2
Side Panel A 2
Stake Base B 4
Base Cover C 4
Cross Beam D 2
Middle Cross Beam E 1
Tilt Top Girder F 4
Short Girder G 2
Long Girder H 2
Top Connection I 1
Back Panel J 1
Seat Panel K 1
Right Armrest L1 1
Left Armrest L2 1
Long Suspender M 2
Short Suspender N 2
Support Hook O 2
Seat Cushion P 1
Back Cushion Q 1
Canopy R 1
Parts List

3
AA Bolt M6x15 8 PCS
BB Flat Washer M6 34 PCS
CC Bolt M6x15 4 PCS
DD Bolt M6x35 4 PCS
EE Nut M6 4 PCS
JJ Bolt M6x40 2 PCS
KK Bolt M6x20 12 PCS
W1 Wrench M6 1 PC
Hardware Pack 1

4
Step 1: Attach Base Cover (C) to Post of Side Panel (A).
Attach Stake Base (B) to Post of Side Panel (A); tighten with Bolts (AA) and Flat Washers (BB) (Fig.1).
Step 2: Attach Cross Beam (D) to Side Panel (A), tighten with Bolts (KK) and Flat Washer (BB) (Fig.2).
Step 3: Attach Middle Cross Beam (E) to Side Panel (A); tighten with Bolts (CC), Bolt (JJ) and Flat
Washer (BB) (Fig 3).
Step 4: Insert Short Girder (G) and Long Girder (H) into the connection tubes of Tilt Top Girder (F).
(Fig.4).
Step 5: Insert Tilt Top Girder (F) into Top Connection (I). (Fig.5).
Step 6: Lift the entire top combination, and place onto Side Panels (A).
Attach Tilt Top Girder (F) to Side Panel (A); tighten with Bolts (DD), Flat Washer (BB) and Nut (EE).
(Fig.6).
BB Flat Washer M6 13 PCS
FF Bolts M6x35 13 PCS
GG Bolts M10x65 4 PCS
HH Flat Washer M10 8 PCS
MM Nut M10 4 PCS
II Spring Washer M10 4PCS
W2 Wrench M10 2 PCS
Hardware Pack 2

5
Step 7: Connect Back Panel (J), Seat Panel (K), Left Arm (L2) and Right Arm (L1) with Bolts (FF)
and Flat Washers (BB). (Fig.7)
Fig.8: Lock Short Suspender (N) onto Back Panel (J) by using Bolt (GG), Flat Washer (HH), Spring
Washer (LL) and Nut (MM). (Fig.8)
Fig.9: First to lock Long Suspender (M) onto Seat Panel (K) by using Bolt (GG), Flat Washer (HH), Spring
Washer (LL) and Nut (MM). (Fig.9)
Fig. 9-1: Then connect Long Suspender (M) with Right Armrest (L1) and Left Armrest (L2) by using Bolt
(FF) and Flat Washer (BB). (Fig. 9-1)

6
II Ground Stake Φ8X180MM 16 PCS
Hardware Pack 3
Fig.10: Hang the assembled Seat to Middle Cross Beam (E) with Support Hook (O). Put Seat Cushion
(P), Back Cushion (Q) on the Seat and place Canopy (R) onto top。
Fig.11: Secure the swing into the ground using the Ground Stakes (II) (Fig 11). Assembly Completed!

7
Care & Maintenance
Before using, clean the Swing completely with a soft dry towel. Do not place your Swing in wet conditions
where there is a risk of rust developing. When not in use, wipe free of any dirt or loose objects, wash with a
mild solution of soap and water; rinse thoroughly and dry completely. Do not use strong detergent or
abrasive cleaners. When not in use, store in a cool, dry location away from sunlight.
Limited Warranty:
Sunjoy Industries warrants to the original purchaser that this item is free from defects in workmanship and
materials for a period of 1 year from the date of purchase, provided the item was factory-sealed at the time
of purchase and is maintained with care and used only for personal, residential purposes. Should any
manufacturing defect arise within this warranty period, Sunjoy Industries will repair or replace (at our option)
any defective merchandise upon proof of purchase; however, transportation and delivery costs, as well as
payments to a third party for assembly or disassembly of the item, remain the responsibility of the purchaser.
A purchaser of an "open box," previously-returned, or "clearance" item, as well as original purchasers
outside of the warranty period, may obtain replacement parts from Sunjoy Industries for products in current
production, at nominal cost.
Exclusions:
Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of
nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not
covered. Proof of purchase (dated register receipt) is required for warranty claims. Warranty is to the
original purchaser and is non-transferable. Any replacement of warranted items will be in the original style
and color, or a similar style and color if the original is unavailable or has been discontinued. As some states
do not allow exclusions or limitations on an implied warranty, the above exclusions and limitations may not
apply. This warranty gives you specific rights, and you may also have other rights, which vary from state to
state.