Sunjoy D-GZ215PST-4-3 User manual

Assembly Instruction
D-GZ215PST-4-3

Post A 4
Base B 4
Base Cover C 4
Long Beam(short side) D 2
Short Beam(short side) E 2
Long Beam(long side) F 2
Short Beam(long side) G 2
Bottom tube of slanting
beam H 4
Middle Beam
Connector I 4
Slanting Bar J 4
Long Middle Beam L 2
Short Middle Beam M 2
Long Netting Bar N 4
Short Netting Bar O 4
Big Top Connector P 1
Hook Q 1
Small Top Connector R 1
Small Top Support
Beam S 4
Big Canopy T 1
Small Canopy U 1
Curtain V 1
Mosquito Netting W 1
Parts List

AA M6x15 Bolt 56 PCS
BB M6 Flat Washer 80 PCS
CC M6x15 Bolt 24 PCS
Z M6 Wrench 1 PC
Hardware Pack 1
Fig.1: Insert Base Cover (C) into Post (A), attach Base (B) to Post (A) by using Bolt (AA) and Flat Washer (BB).
Fig.2: Attach Long Beam (F) to Short Beam (G) by using Bolt CC and Flat Washer BB. Repeat the step for Long
Beam (D) and Short Beam (E).
Fig.3: Attach assembled beam to Post (A) by using Bolt AA, Bolt CC and Flat Washer BB.
Fig.4: Attach Long Netting Bar (N) (Short Netting Bar O) to Beam D (E, F, G) by using Bolt AAand Flat Washer BB.
Slanting Support Bar X 8
Parts List

BB M6 Flat Washer 16 PCS
DD M6x40 Bolt 8 PCS
EE M6 Nut 8 PCS
Hardware Pack 2
Fig.7: Attach Bottom tube of slanting beam (H) to Post (A) by using Bolt DD, Flat Washer BB and Nut EE
Fig.8: Attach Hook (Q) to Big Top Connector (P), insert one side of Slanting Bar (J) into Big Top Connector (P).
Fig.9: Insert the other side of Slanting Bar (J) into Bottom tube of slanting beam (H).
Fig.10: Insert Short Middle Beam (M) and Long Middle Beam (L) into Big Top Connector (P).
Fig.5, Fig.5-1: Attach Slanting Support Bar (X) to Beam and Post (A) by using Bolt (AA) and Flat Washer (BB).
Fig.6: Attach Middle Beam Connector (I) to Beam (D, E, F, G) by using Bolt (AA) and Flat Washer (BB).

FF Φ6x180MM Stake 16 PCS
GG Plastic Ring 104 PCS
Hardware Pack 2
Fig.11: Attach Long Middle Beam (L) and Short Middle Beam (M) to Middle Beam Connector (I) respectively
by using Bolt DD, Flat Washer BB, Nut EE.
Fig.12: Insert Small top support beam (S) into Small Top Connector (R).
Fig.13: Put Big Canopy (T) on the big top and do not expand it now. Assemble the Small canopy (U) into 4
corners of Small Top Support Beam (S).
Fig.14: Insert Small Top Support Beam (S) into Slanting Bar (J).

1. Keep all children and pets away from assembly area. Children and pets should be supervised when they
are in the area of gazebo construction.
IMPORTANT:
2. The area for assembly should not be less than 6 feet from any obstruction such as fence, garage, house,
overhanging branches, laundry line or electrical wires.
3. This unit is heavy. Do not assemble this item alone. Six people are recommended for safe assembly.
4. Some parts may contain sharp edges. Wear protective gloves if necessary during assembly.
5. When assembling and using this product, basic safety precautions should always be followed to reduce the
risk of personal injury and damage to equipment. Please read all instructions before assembly and use.
6. For outdoor use only. Install on level ground. Stakes are provided to secure the gazebo in grass ground. If
you wish to secure the gazebo to a wood deck or concrete surface, you will need to purchase fasteners
appropriate for these surfaces. These are readily available at your local hardware store or home center.
7. Check all bolts for tightness before and during usage.
8. Please check your state and local regulations prior to purchasing. Some jurisdictions may require permits
for, or otherwise regulate, installation and use.
9. While this gazebo is manufactured to withstand gale force winds utilizing only the supplied ground stakes,
in areas subject to frequent severe weather, securing the gazebo to a deck, concrete patio or footings should
be considered.
Limited Warranty:
This limited warranty is extended to the original purchaser and applies to defects in materials and
workmanship of your item provided the item is maintained with care and used only for personal, residential
purposes. The item is warranted to be free from defects in material or workmanship for a period of one (1)
year. We don't reimburse for transportation or delivery costs, or compensate the individual or any outside
party for assembling or disassembling the product.
Fig.15: Spread Big Canopy (T) and fix it into Bottom tube of slanting beam (H).
Fig.16: Hang Mosquito Netting (W) and Curtain (V) on the beam (D, E, F, G) and Netting bar (N, O) by using
Plastic Ring (GG).
Fig.17: Up Base cover (C), use Stake (FF) to fasten the gazebo on the ground and now your gazebo is
ready for use.

Exclusions:
Items used for commercial, contract, or other non-residential purposes, or items damaged due to acts of
nature, vandalism, misuse, or improper assembly are not covered. Corrosion or rusting of hardware is not
covered. Proof of purchase (dated register receipt) is required for warranty claims. Warranty is to the original
purchaser and is non-transferable. Any replacement of warranted items will be in the original style and color,
or a similar style and color if the original is unavailable or has been discontinued. As some states do not allow
exclusions or limitations on an implied warranty, the above exclusions and limitations may not apply. This
warranty gives you specific rights, and you may also have other rights, which vary from state to state.
Maintenance:
Our iron/steel components for garden accessories and patio items are coated with rust inhibiting paint that
protects it from rusting. However, due to the nature of iron, surface oxidation (rusting) will occur once these
protective coatings are scratched.
This is a natural process and is not a defect! To minimize this condition, we
recommend care when assembling & handling the product to prevent scratching the paint. Should any
scratching or damage occur, we recommend immediate touch-up with rust inhibiting paint. Surface rust can
also be easily removed with a very light application of common cooking oil. If surface oxidation (rusting)
occurs and if no measure is taken to prevent this, the oxidation may start dripping on to deck or patio and
cause damaging stains, which may be difficult to remove. This can be prevented if measure is taken to keep
the product from oxidizing.
IMPORTANT
Please take time to read these instructions thoroughly and follow each step carefully for safe and easy
operation. Keep this manual for future reference.
For technical assistance on assembly or replacement parts, call Sunjoy Industries at 1-866-578-6569 from
8:30AM to 5:30PM EST, or email us at [e-mail], or visit www.sunjoydirect.com for
assistance.
Made in China