Sunnydaze Decor GWC-456 User manual

Page 1 / 2GWCP004
WROUGHT IRON 5-PIECE FIREPLACE
TOOL SET WITH STAND
GWC-456
Read this manual carefully before using this product. Save this manual for future reference.

HELPFUL HINTS
• Sunnydaze Decor advises reading this manual thoroughly and assembling the item soon after purchase.
• Do not fully tighten hardware until the entire unit is loosely assembled. If the hardware is tightened too soon, mounting
holes may not align, and parts may not easily fit together.
WARNING
CHOKING HAZARD — This item contains small parts
that can be swallowed by children. Keep children away
during assembly.
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
06/2021
  
AEye Bolt 1
BTool Holder Bar 2
CCenter Pole 1
DTop Leg 1
EBottom Leg 1
FSplit Washer 1
GM6x20mm Bolt 1
HTool Set 4PC
(not included)
Phillips Screwdriver
Ensure all parts are
accounted for before
disposing of packaging.
NOTE: Bolt (G) may be
located in the bottom
of Center Pole (C).
Remove bolt before
beginning assembly.

Page 2 / 206/2021GWCP004
Care & Maintenance
SAFE USE: Only use on a at, level surface.
GENERAL USE & CARE: Recommended for indoor use only.
Manufacturer and seller are not liable for any damage resulting
from exposure to outdoor elements. Damage from outdoor use
and/or normal wear and tear is not covered by the 1-year product
warranty.
INSPECT: Periodically check assembly points and tighten ttings
as necessary.
CLEANING: Use a damp cloth to clean. Do not use abrasive
cleaners as doing so may cause parts to tarnish or rust.
• Supervise children at all times; do not allow children to play on or play with any part of this product.
• Do not use the brush to sweep live coals (embers).
• Do not use harsh chemicals or abrasive materials to clean this unit.
• This product is for residential use only; institutional or commercial use will void the warranty.
SAFETY STATEMENTS & WARNINGS

WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage


A
B
C
D
E
F
G
x2
Assembly
• Evenly cross Top Leg (D) with Bottom Leg (E) and secure to the
bottom of Center Pole (C) using Split Washer (F) and M6x20mm
Bolt (G).
• Stand assembled components upright.
• Evenly cross both Tool Holder Bars (B).
• Use Eye Bolt (A) to secure the tool holder bars to Center Pole
(C).