Sunnydaze Decor NB-FFP30 User manual

FFP30 05/2023
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
Page 1 / 3
ROYAL CAULDRON STEEL FIRE PIT
NB-FFP30
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.

CHOKING HAZARD — This item contains small parts that can
be swallowed. Keep children and pets away during assembly.
WARNING
WARNING:
Manufacturer and seller expressly disclaim any and all liability from
personal injury, property damage or loss, whether direct or indirect,
or incidental, resulting from the incorrect attachment, improper

Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
  
ASpark Screen 1
BFire Bowl 1
CFire Bowl Base 1
DM8x25mm Grub Screw 3
EWood Grate 1
FPoker/Lifting Tool 1
GM10x35mm Nut 1
SCAN THIS CODE
WITH YOUR
SMARTPHONE
TO VIEW OUR
ASSEMBLY VIDEO

FFP30 05/2023 Page 2 / 3
ASSEMBLY
Place Fire Bowl Base (C) on the ground with the
narrow side facing upwards, as shown.
STEP 1
C: 1
STEP 2
B: 1
G: 1
STEP 3
D: 3
STEP 4
A: 1
E: 1
Align the center hole in Fire Bowl (B) with the bolt on
Fire Bowl Base (C). Secure the bowl and base by
hand-tightening M10x35mm Nut (G).
Hand-tighten three M8x25mm Grub Screws (D) to
the inside rim of Fire Bowl (B).
Place Wood Grate (E) into Fire Bowl (B) and Spark
Screen (A) onto Fire Bowl (B).

FFP30 05/2023 Page 3 / 3
CARE & MAINTENANCE
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or

SAFETY STATEMENTS & WARNINGS

• For outdoor use only. Never use this product in an enclosed area.
• Always follow local laws and regulations when using wood-burning fire pits.
• Exercise the same care and precautions as you would with an open fire.
• Always supervise children and pets when they are in proximity of this product, whether it is in use or not in use.
• Never use any fire pit during dry or windy conditions.
• Keep unit a safe distance away from buildings, balconies, or overhangs when in use.
• Do not use on or near combustible surfaces or structures such as wood decks, dry leaves or grass, mulch, vinyl or wood siding, etc.
• Only use this fire pit on a level, non-combustible surface.
• Keep away from all combustible materials including gasoline and other flammable liquids and vapors.
• Never use accelerants such as, but not limited to, gasoline, alcohol, paint thinners, kerosene, as this may cause serious injury or product damage.
• Do not overfill or use this unit or use it to burn leaves or trash.
• The fire pit becomes very hot when in use. Use the lid lifter to handle the hot screen. Let the unit completely cool before cleaning or moving.
• Never leave unit unattended while hot or in use.
• Extinguish the fire properly before leaving it unattended. If necessary, use a fire extinguisher or sand to smother the fire. NEVER use
water to extinguish hot fires or embers as doing so may cause serious injury and/or permanently damage the product.
• Ashes can remain hot for a long time after fire is extinguished. Dispose of cold ashes properly.
• Ensure the unit is completely cool before covering, failure to do so will damage the cover and the unit.
• DO NOT USE CHEMICAL-BASED CLEANERS as this may damage the product and/or ignite a flame during the next use.
Contact the local authorities regarding possible burn restrictions before using this product.
SAFE USE: Always use re pits on a at, non-combustible surface such as concrete, rock, or stone. Do not use this re pit
on a wood deck or any other combustible surfaces like dry grass, leaves, mulch, etc. Never use in an area with an overhead
structure or near any unprotected combustible constructions like vinyl or wood siding. Avoid using near or under overhanging
trees and shrubs.
The re pit and screen will become extremely hot while in use. Always use the poker/lifting tool and heat-resistant gloves
when maintaining a re.
NO ACCELERANTS, NO PLASTICS: Never use an accelerant, i.e. gasoline or kerosene, to start a re; this is dangerous
and can damage your re pit.
Never use any plastic materials in or nearby a re pit. The emissions from burning plastic are toxic. Additionally, plastic
residue is very di󰀩cult to remove.
EXTINGUISH: Let res gradually die down and go out on its own. DO NOT use water to put out a re as the sudden drop
in temperature may damage the metal and/or cause serious injury.
EXPOSURE & MAINTENANCE:Long-term exposure to high-intensity heat can cause the mesh screen to warp and the
high-temperature paint to ake or burn o󰀨 the steel. If the paint burns o󰀨 and the steel is exposed to moisture, it will rust.
As with any outdoor steel product, periodic maintenance is required to maintain integrity and appearance. Remove rust and
renish with a paint that is suitable for high-temperature surfaces; carefully follow the paint manufacturer instructions and
ensure the paint is completely dry before using the unit again. WARNING: The one-year warranty does not cover damages
or defects caused by painting and/or repairs.
CLEANING: Ensure the re pit and ashes are completely cool before cleaning. Ashes can remain hot long after a re dies
down. If you feel heat when your hand is close to the metal or the ashes, the re pit is too hot to clean.
Remove ashes and debris from the re bowl before every use.
COVER AND STORE: Ensure the re pit is completely cool before covering (cover not included). Always clean the re pit
before covering it. Do not allow the re pit to be exposed to water. The manufacturer is not liable for damage resulting from
general use and/or environmental conditions. Store in a dry location; this will protect it from the e󰀨ects of weather elements.