Sunnydaze Decor NB-NW201 User manual

NW201 05/2023
NORTHLAND GRILL
FIRE PIT WITH COOKING GRATE
NB-NW201
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.

Page 1 / 4
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
(not included)
Phillips Screwdriver
10mm Wrench
  
AFire Bowl 1
BLegs 2
CStraight Rail 2
DCurved Rail 2
EFlat Bar 1
FSide Screen (L/R) 2
GBack Screen 1
HFront Screen 1
ICooking Grate 1
JPoker 1
KCover 1
 — This item contains small parts that can
be swallowed. Keep children and pets away during assembly.
WARNING
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or

Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
  
1M6x30mm Bolt Set 4
2M6x12mm Bolt Set 18
SCAN THIS CODE
WITH YOUR
SMARTPHONE
TO VIEW OUR
ASSEMBLY VIDEO

NW201 05/2023 Page 2 / 4
ASSEMBLY
STEP 1
A: 1
B: 2
1: 4
Align Fire Bowl (A) onto Legs (B) and secure using four
M6x30mm Bolt Sets (1).
Align Straight Rails (C) with the long sides of the re bowl
and loosely secure by hand-tightening four M6x12mm
Bolt Sets (2).
Do not fully tighten bolts until after Step 3 is complete!
Align Curved Rails (D) with the straight rails and the short
side of the re bowl. Loosely secure the curved rails by
hand-tightening four M6x12mm Bolt Sets (2).
Fully tighten the bolt sets of all four rails.
Loosely secure Back Screen (G) to Side Screens (F)
using four M6x12mm Bolt Sets (2).
Loosely secure Flat Bar (E) to the front of the side screens
using two M6x12mm Bolt Sets (2).
Do not fully tighten bolts until after Step 5 is complete!
STEP 2
C: 2
2: 4
STEP 3
D: 2
2: 4
STEP 4
E: 1
F: 2
G: 1
2: 6
NOTE: The front of the side screen has one mounting hole, the back
has two mounting holes.
Review all steps and understand assembly before beginning.
Do not fully tighten hardware until instructed to do so.

NW201 05/2023 Page 3 / 4
STEP 5
H: 1
2: 4
Align the top of Front Screen (H) with the inside of the side
screens and secure by hand-tightening four M6x12mm
Bolt Sets (2). Then, fully tighten all bolt sets.
Place Cooking Grate (I) onto the ledges inside the re
bowl. Then, place the spark screen over the re bowl.
STEP 6
I: 1
IMPORTANT: The top of the front screen installs on the inside of
the side screens, while the front of the spark screen remains on the
outside of the side screens.
SAFE USE: Always use re pits on a at, non-combustible surface such as concrete, rock, or stone. Do not
use this re pit on a wood deck or any other combustible surfaces like dry grass, leaves, mulch, etc. Never use
in an area with an overhead structure or near any unprotected combustible constructions like vinyl or wood
siding. Avoid using near or under overhanging trees and shrubs.
The re pit and screen will become extremely hot while in use. Always use the poker/lifting tool and heat-
resistant gloves when maintaining a re.
 Never use an accelerant, i.e. gasoline or kerosene, to start a re; this
is dangerous and can damage your re pit.
Never use any plastic materials in or nearby a re pit. The emissions from burning plastic are toxic. Additionally,
plastic residue is very di󰀩cult to remove.
EXTINGUISH: Let res gradually die down and go out on its own. DO NOT use water to put out a re as the
sudden drop in temperature may damage the metal and/or cause serious injury.
:Long-term exposure to high-intensity heat can cause the mesh screen to
warp and the high-temperature paint to ake or burn o󰀨 the steel. If the paint burns o󰀨 and the steel is exposed
to moisture, it will rust. As with any outdoor steel product, periodic maintenance is required to maintain integrity
and appearance. Remove rust and renish with a paint that is suitable for high-temperature surfaces; carefully
follow the paint manufacturer instructions and ensure the paint is completely dry before using the unit again.
 The one-year warranty does not cover damages or defects caused by painting and/or repairs.
CLEANING: Ensure the re pit and ashes are completely cool before cleaning. Ashes can remain hot long
after a re dies down. If you feel heat when your hand is close to the metal or the ashes, the re pit is too hot
to clean.
Remove ashes and debris from the re bowl before every use.
Clean the grilling grate after each use; the grate must be completely cool before cleaning. Use mild detergent,
warm water, and a medium-bristled scrub brush to clean the grate. Dry with a soft, clean towel.
CARE & MAINTENANCE

NW201 05/2023 Page 4 / 4
SAFETY STATEMENTS & WARNINGS

• For outdoor use only. Never use this product in an enclosed area.
• Always follow local laws and regulations when using wood-burning fire pits.
• Exercise the same care and precautions as you would with an open fire.
• Always supervise children and pets when they are in proximity of this product, whether it is in use or not in use.
• Never use any fire pit during dry or windy conditions.
• Keep unit a safe distance away from buildings, balconies, or overhangs when in use.
• Do not use on or near combustible surfaces or structures such as wood decks, dry leaves or grass, mulch, vinyl or
wood siding, etc.
• Only use this fire pit on a level, non-combustible surface.
• Keep away from all combustible materials including gasoline and other flammable liquids and vapors.
• Never use accelerants such as, but not limited to, gasoline, alcohol, paint thinners, kerosene, as this may cause
serious injury or product damage.
• Do not overfill or use this unit or use it to burn leaves or trash.
• The fire pit becomes very hot when in use. Use the lid lifter to handle the hot screen. Let the unit completely cool
before cleaning or moving.
• Never leave unit unattended while hot or in use.
• Extinguish the fire properly before leaving it unattended. If necessary, use a fire extinguisher or sand to smother the
fire. NEVER use water to extinguish hot fires or embers as doing so may cause serious injury and/or permanently
damage the product.
• Ashes can remain hot for a long time after fire is extinguished. Dispose of cold ashes properly.
• Ensure the unit is completely cool before covering, failure to do so will damage the cover and the unit.
• DO NOT USE CHEMICAL-BASED CLEANERS as this may damage the product and/or ignite a flame during the
next use.
Contact the local authorities regarding possible burn restrictions before using this product.
WARNING: THE ONE-YEAR WARRANTY DOES NOT COVER DAMAGES OR DEFECTS
CAUSED BY THE APPLICATION OF CHEMICAL TREATMENTS, PROTECTIVE COATINGS, OR TOUCH-UP PAINT.
If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

 Ensure the re pit is completely cool before covering. Always clean the re pit before
covering it. Do not allow the re pit to be exposed to water.
Store this unit in a dry location to protect it from environmental elements. The manufacturer is not liable for
damage resulting from general use and/or environmental conditions.