Sunnydaze Decor NB-MS201 User manual

MS201 05/2023
COSMIC OUTDOOR FIRE PIT
WITH COOKING GRATE
NB-MS201
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.

Page 1 / 3
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
(not included)
Phillips Screwdriver
10mm Wrench
  
AFire Bowl 1
BLeg 3
CSafety Ring 4
DSpark Screen 1
ECooking Grate 1
FPoker/Screen Lifter 1
GM6x12mm Bolt & Nut 13
HM6x8mm Bolt 4
 — This item contains small parts that can
be swallowed. Keep children and pets away during assembly.
WARNING
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or

Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
SCAN THIS CODE
WITH YOUR
SMARTPHONE
TO VIEW OUR
ASSEMBLY VIDEO

MS201 05/2023 Page 2 / 3
ASSEMBLY
STEP 1
A: 1
B: 3
G: 9
Ensuring the narrow edge of the leg is facing outward,
align Leg (B) with the bottom of Fire Bowl (A) and loosely
fasten using three M6x12mm Bolts & Nuts (G).
Repeat to attach the remaining two legs.
Finish tightening hardware on all legs.
Review all steps and understand assembly before beginning.
Do not fully tighten hardware until instructed to do so.
With the brackets facing upward, align four Safety Rings
(C) and loosely secure using four M6x8mm Bolts (H).
Do not fully tighten bolts until after Step 3 is complete!
Carefully guide the assembled ring onto the re bowl and
align the safety ring brackets with the re bowl mounting
holes. Then, loosely fasten the ring to the bowl using four
M6x12mm Bolts & Nuts (G).
Fully tighten hardware after all bolts have been installed.
Fully tighten all safety ring hardware.
Place Spark Screen (D) onto the assembled unit.
Assistance is recommended
for this step.
STEP 2
C: 4
H: 4
STEP 3
G: 4
STEP 4
D: 1
E: 1

MS201 05/2023 Page 3 / 3
SAFE USE: Always use re pits on a at, non-combustible surface such as concrete, rock, or stone. Do not use this re pit on a
wood deck or any other combustible surfaces like dry grass, leaves, mulch, etc. Never use in an area with an overhead structure or
near any unprotected combustible constructions like vinyl or wood siding. Avoid using near or under overhanging trees and shrubs.
The re pit and screen will become extremely hot while in use. Always use the poker/lifting tool and heat-resistant gloves when
maintaining a re.
 Never use an accelerant, i.e. gasoline or kerosene, to start a re; this is dangerous and can
damage your re pit.
Never use any plastic materials in or nearby a re pit. The emissions from burning plastic are toxic. Additionally, plastic residue is
very di󰀩cult to remove and could plug the drainage hole.
EXTINGUISH: Let res gradually die down and go out on its own. DO NOT use water to put out a re as the sudden drop in
temperature may damage the metal and/or cause serious injury.
: Long-term exposure to high-intensity heat can cause the mesh screen to warp and the high-
temperature paint to ake or burn o󰀨 the steel. If the paint burns o󰀨 and the steel is exposed to moisture, it will rust. As with any
outdoor steel product, periodic maintenance is required to maintain integrity and appearance. Remove rust and renish with a paint
that is suitable for high-temperature surfaces; carefully follow the paint manufacturer instructions and ensure the paint is completely
dry before using the unit again.  The one-year warranty does not cover damages or defects caused by painting and/or
repairs.
CLEANING: Ensure the re pit and ashes are completely cool before cleaning. Ashes can remain hot long after a re dies down. If
you feel heat when your hand is close to the metal or the ashes, the re pit is too hot to clean.
Remove ashes and debris from the re bowl before every use.
Clean the grilling grate after each use; the grate must be completely cool before cleaning. Use mild detergent, warm water, and a
medium-bristled scrub brush to clean the grate. Dry with a soft, clean towel.
 Ensure the re pit is completely cool before covering (cover not included). Always clean the re pit before
covering it. Do not allow the re pit to be exposed to water. The manufacturer is not liable for damage resulting from general use
and/or environmental conditions. Store in a dry location; this will protect it from the e󰀨ects of weather elements.
CARE & MAINTENANCE
WARNING:
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or

SAFETY STATEMENTS & WARNINGS

• For outdoor use only. Never use this product in an enclosed area.
• Always follow local laws and regulations when using wood-burning fire pits.
• Exercise the same care and precautions as you would with an open fire.
• Always supervise children and pets when they are in proximity of this product, whether it is in use or not in use.
• Never use any fire pit during dry or windy conditions.
• Keep unit a safe distance away from buildings, balconies, or overhangs when in use.
• Do not use on or near combustible surfaces or structures such as wood decks, dry leaves or grass, mulch, vinyl or wood siding, etc.
• Only use this fire pit on a level, non-combustible surface.
• Keep away from all combustible materials including gasoline and other flammable liquids and vapors.
• Never use accelerants such as, but not limited to, gasoline, alcohol, paint thinners, kerosene, as this may cause serious injury or product damage.
• Do not overfill or use this unit or use it to burn leaves or trash.
• The fire pit becomes very hot when in use. Use the lid lifter to handle the hot screen. Let the unit completely cool before cleaning or moving.
• Never leave unit unattended while hot or in use.
• Extinguish the fire properly before leaving it unattended. If necessary, use a fire extinguisher or sand to smother the fire. NEVER use
water to extinguish hot fires or embers as doing so may cause serious injury and/or permanently damage the product.
• Ashes can remain hot for a long time after fire is extinguished. Dispose of cold ashes properly.
• Ensure the unit is completely cool before covering, failure to do so will damage the cover and the unit.
• DO NOT USE CHEMICAL-BASED CLEANERS as this may damage the product and/or ignite a flame during the next use.
Contact the local authorities regarding possible burn restrictions before using this product.