Sunnydaze Decor KF-610037D User manual

LARGE BRONZE CROSSWEAVE FIRE PIT
KF-610037D
Read the assembly instructions carefully and follow the care instructions. Save this document for future reference.

KF-610037D Page 1 / 2
  
ASpark Screen Handle 1
BSpark Screen 1
C1/4 Top Ring 4
DFire Bowl 1
EBracket 4
FLog Grate 1
GLeg 3
LRain Cover 1
ASSEMBLY
1. Slide 3x Leg (G) into the brackets on the bottom of Fire Bowl (D) and fully tighten 6x Bolt (T1) onto the leg plate. NOTE: the


2. Attach 1x 1/4 Top Ring (C) to Fire Bowl (D) by hand-tightening 1x Bolt (T2), 1x Bracket (E), 1x Washer (U) and 1x Nut (V). DO

3. Slide the second 1/4 Top Ring (C) into the one that is attached to the Fire Bowl (B) and attach it to the re bowl by hand-tightening
1x Bolt (T2), 1x Bracket (E), 1x Washer (U) and 1x Nut (V).
4. Repeat Step 3 to attach the remaining 1/4 Top Rings (C) to Fire Bowl (D). Adjust the bracket horizontal, then tighten all the bolts.
5. Place Log Grate (F) into bottom of Fire Bowl (D).
6. Assemble Spark Screen Handle (A) to the Fire Screen (B) using 1x Washer (U) and 1x Nut (V).
7. Place the assembled spark screen onto the re pit.
NOTE: When not in use, and after the re pit is completely cool, use Cover (L) to prevent exposure to water.
  
T1 M6 x 10mm Bolt 6
T2 M6 x 20mm Bolt 4
UWasher 5
VNut 5
XHex Key 1
YSpanner 1
ZPoker 1
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
CHOKING HAZARD — This item contains small parts that can be swallowed.
Keep children away during assembly.
06/2020
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:

Page 2 / 2KF-610037D 06/2020
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

CARING FOR YOUR FIRE PIT:
Clean Regularly: All re pits must be cleaned and inspected periodically. Cleaning out ashes between each use
is recommended. Do not allow ash to accumulate in the bottom of the pit.
Clean Safely: Before cleaning, make sure the re has completely died down and the metal is completely cool.
Take care never to drop your re pit, as any breakage could cause serious damage and costly repairs.
Avoid Accelerants: Never use accelerants to start a re; this is dangerous and can damage the re pit.
Avoid Plastic: Never use any plastic materials in or nearby a re pit. It is very di󰀩cult to remove the residue later,
and the burning of this residue can cause the emission of toxic fumes.
Use on a Safe Surface: Always use re pits on a smooth, non-combustible surface; do not use on a wood
deck or any other combustible surfaces like dry grass, leaves, mulch, etc. Keep the re pit a safe distance from
combustible structures such as fences, garages, homes, etc.
Cover and Store: Covering your re pit while not in use is highly recommended. Do not allow the re pit to
be exposed to water; the manufacturer is not liable for rust due to weather conditions. Do not allow water to
accumulate in the cover.
During winter and inclement weather, cover and store the re pit in a dry location; this will protect it from the
elements and dust buildup.
Extinguish: Letting res die down gradually is best. Do not use water to put out a re as this may cause the metal
to crack from the sudden drop in temperature.

• For outdoor use only. Never use this product in an enclosed area.
• Always follow local laws and regulations when using wood-burning fire pits.
• Exercise the same care and precautions as you would with an open fire.
• Only use this fire pit on a level, non-combustible surface.
• Keep unit a safe distance away from buildings, balconies, or overhangs when in use.
• Do not use on or near combustible surfaces or structures such as wood decks, dry leaves or grass, mulch, vinyl or
wood siding, etc.
• Keep away from all combustible materials including gasoline and other flammable liquids and vapors.
• Never use accelerants such as, but not limited to, gasoline, alcohol, paint thinners, kerosene, as this may cause
serious injury or product damage.
• Children should always be under direct adult supervision around this product. Supervise children and pets when
the fire pit is in use.
• Do not overfill or use this unit to burn leaves or trash.
• Avoid using any fire pit during dry or windy conditions.
• Never leave unit unattended while hot or in use.
• DO NOT USE CHEMICAL-BASED CLEANERS as this may damage the product and/or ignite unsafe flames
during the next use.
• Extinguish the fire properly before leaving. Use a fire extinguisher or a bucket of sand to smother the fire if necessary.
Do not use water to extinguish hot fires or embers as this may cause serious injury and may damage the product.
• Ashes can remain hot for a long time. Ensure ashes are completely cold and dispose of them properly.
• The fire pit becomes very hot when in use; let it completely cool before cleaning or moving.
• Ensure the unit is completely cool before covering.
SAFETY STATEMENTS & WARNINGS