Sunnydaze Decor NB-154 User manual

ASSEMBLY
BRONZE CHALICE FIRE PIT
NB-154
Read the assembly instructions carefully and follow the care instructions. Save these instructions for future reference.

FP190726 Page 1 / 2
  
AFire Bowl 1
BFire Bowl Base 1
CLog Grate 1
DSpark Screen 1
EGrub Screw 3
FNut 1
GPoker 1
Place Fire Bowl Base (B) on the ground with
the narrow side facing upwards, as shown.
Align the center hole in Fire Bowl (A) with the bolt
on Fire Bowl Base (B). Secure the bowl and base by
hand-tightening Nut (F).
STEP 1 STEP 2
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
CHOKING HAZARD — This item
contains small parts that can be
swallowed. Keep children away
during assembly.
WARNING
08/2020
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.

FP190726 Page 2 / 2
• For outdoor use only. Never use this product in an enclosed area.
• Always follow local laws and regulations when using wood-burning fire pits.
• Exercise the same care and precautions as you would with an open fire.
• Keep unit a safe distance away from buildings, balconies, or overhangs when in use.
• Only use this fire pit on a level, non-combustible surface.
• Do not use on or near combustible surfaces or structures such as wood decks, dry leaves or grass, mulch, vinyl or wood siding, etc.
• Keep away from all combustible materials including gasoline and other flammable liquids and vapors.
• Never use accelerants such as, but not limited to, gasoline, alcohol, paint thinners, kerosene, as this may cause serious injury or product damage.
• The fire pit becomes very hot when in use; let it completely cool before cleaning or moving.
• Keep out of reach of children.
• Do not overfill or use this unit to burn leaves or trash.
• Avoid using any fire pit during dry or windy conditions.
• Never leave unit unattended while hot or in use.
• Supervise children and pets when the fire pit is in use.
• DO NOT USE CHEMICAL-BASED CLEANERS as this may damage the product and/or ignite a flame during the next use.
• Extinguish the fire properly before leaving. Use a fire extinguisher or a bucket of sand to smother the fire if necessary.
Do not use water to extinguish hot fires or embers as this may cause serious injury and may damage the product.
• Ashes can remain hot for a long time after fire is extinguished. Dispose of cold ashes properly.
• Ensure the unit is completely cool before covering, failure to do so will damage the cover and the unit.
Hand-tighten 3x Grub Screws (E) to the inside rim
of Fire Bowl (A). Hand-tighten only!
Place Log Grate (C) into Fire Bowl (A) and Spark
Screen (D) onto Fire Bowl (A).
CARING FOR YOUR FIRE PIT:
Clean Regularly: All re pits must be cleaned and inspected periodically. The ash produced in wood-burning re pit must be
cleaned out regularly. Never allow ash to accumulate in the bowl.
Clean Safely: Make sure the re has completely died down and the metal is completely cool before you remove the ashes
and cleaning the bowl.
Cover and Store: If you do not plan to use your re pit for an extended period of time, cover and store it in a dry location;
this will protect it from the elements and dust buildup. Do not allow the re pit to be exposed to water. The manufacturer is
not liable for rust due to weather conditions.
Extinguish: Let res die down gradually, do not use water to put out a re as this may cause the metal to crack from the
sudden drop in temperature.
STEP 3 STEP 4
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage or loss, whether direct or


SAFETY STATEMENTS & WARNINGS
08/2020