Sunnydaze Decor CAVERN OF MYSTERY User manual

ASSEMBLY
1. Locate the light cables inside the fountain and rmly connect them to the splitter on the light cable.
2. Firmly connect the adapter to the light cable.
3. Connect water tube (pre-assembled inside the fountain) to the pump and place the pump inside the fountain.
4. Fill the fountain with enough water to keep the pump fully submerged during operation, approximately
3.5 gallons.
5. Plug both power cords into a properly grounded GFCI outlet.
CAVERN OF MYSTERY
OUTDOOR WATER FOUNTAIN
FWD-471
Read assembly instructions carefully and follow the care instructions. Save this document for future reference.

NOTE: The water tube is built into the fountain. Take
care when handling the water tube; detaching the water
tube from the fountain will damage the fountain and void
the product warranty.
Page 1 / 2
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
FD50038
HELPFUL HINT
When rst plugged in, there may be air in the pump. It may take several minutes for trapped air to escape, allowing water to ow.
Sponge-like polyurethane foam
lters help control water ow
and prevent splashing ― do not
remove these guards as doing
so may result in splashing and/
or leaking.
 
Fountain 1
Light Cable 1
Electric Submersible Pump 1
Rubber Cap 1
AC Adapter 1
11/2021

Page 2 / 2
WARNING!
Manufacturer and seller expressly disclaim any and all liability from personal injury, property damage
or loss, whether direct or indirect, or incidental, resulting from the incorrect attachment, improper use,

FD50038

IMPORTANT INFORMATION
• For outdoor use only.
• Some splashing is normal; adjust the flow rate on the pump body if the water flow is too high.
• Check the water level and fill frequently to ensure the pump remains fully submerged; never allow the pump
to run dry as it will burn out the motor.
• Only use water in this fountain. Distilled water will help prevent mineral buildup, but is not required. Avoid
heavily chlorinated water as it may damage the fountain and pump.
• Periodically change the water to keep the fountain and pump clean. Remove scale and buildup regularly.
DO NOT use harmful additives such as bleach, chlorine, etc.
DO NOT use abrasive materials to scrub the fountain or pump.
DO NOT use a pressure washer to clean the fountain.
• Always shut the power supply off before cleaning and maintaining the fountain and pump.
• Take care when handling the pump; only pick it up by the body of the pump, never by the power cord.
• During freezing weather, drain the fountain, disconnect the pump and store indoors; allowing ice to form
may damage the fountain in such ways as, but not limited to, the fountain cracking, and/or permanent pump
damage.
• Over time, the finish may gradually mellow in color; this is part of the natural aging process.
TROUBLESHOOTING
• Ensure that the pump is fully submerged and add water if necessary.
• If water is not flowing within several moments of the fountain being plugged in, the pump may have trapped air
which can prevent water from circulating properly. Simply unplug the power supply for a few moments and plug
it back in. Also check the pump and tubing for obstructions.
• If water is not flowing check the tubing for kinks or obstructions. If water is splashing, check the flow control on
the body of the pump; it may need to be adjusted to achieve the desired flow rate.
• If lights are not working, ensure the cables are fully connected and the plastic collars are adequately tightened;
do not over-tighten the collars.
• If water is not flowing evenly, ensure the fountain is on a smooth, level surface. Soft surfaces may cause the
fountain to become unbalanced. A large stepping stone or paving stone (not included) is recommended to help
ensure the fountain remains evenly balanced.
• Make sure the power outlet is working; if in doubt about electrical connections, consult a certified electrician.
• Prevent water loss and damage to electrical sockets by creating a drip loop. Place the pump in the reservoir,
then drape the cord over the edge where the cord exits the fountain, ensuring the power cord remains below the
wall outlet. See drawing for reference:
If you are still experiencing issues, please contact our customer service team through one of the methods mentioned at
the top of page 1. Please have the item number and order information available to help expedite response time.
Drip Loop
11/2021