Sunnydaze Decor QZC-342 User manual

CY23F0035 07/2023
PLASTIC WICKER CYLINDER FOUNTAIN
QZC-342
Carefully review all assembly and care information before using this product. Save this manual for future reference.
Select a smooth, level surface to place the fountain. 
Page 1 / 3
Thank you for choosing Sunnydaze Decor. We stand behind our brand and the quality of the items we sell.
Replacement parts or products will be sent at our discretion within the 1-year warranty period. Proof of purchase, with
the date of purchase as well as photos of the merchandise defect, must be provided. Photos are used to determine
the cause of defects and for future quality control. Register your warranty at https://tiny.cc/SunnydazeWarranty
If you have any questions, comments or concerns, feel free to contact us by phone at 833-982-1977, by email:
[e-mail], or via our contact us page at https://tiny.cc/SunnydazeContact
Purchase Date: / / Order/Customer Reference Number:
IMPORTANT NOTES:
• The water tubing is built into the fountain topper. Take care when handling the water tube; detaching the tube from the topper will damage the fountain and
void the warranty.
• Familiarize yourself with the flow control valve on the pump, maximum (+) and minimum (-). This may need to be adjusted to achieve optimal water flow.
• The light and light cable are rated for contact with water. Use care when handling the light, jarring movements or dropping the light may cause it to burn out
prematurely.
Inspect packaging to ensure all
parts are accounted for before
disposing of packing materials.
Save the packing slip.
 
Topper 1
Liner 1
Fountain Body 1
Electric Submersible Pump 1
Light Splitter 1
AC Adapter 1

CY23F0035 07/2023 Page 2 / 3
1. Connect the light splitter to the
short pump cable.
2. Locate the light cable inside
the fountain body and securely
connect it to the light splitter.
3. Run the long pump power
cable through the inside of the
fountain body, and under the
bottom of the fountain body.
4. Place the pump inside the liner
and set the liner inside the
fountain body.
5. Locate the light cables on the
underside of the topper and rmly
connect them to the light splitter.
6. Firmly connect the pump to the
water tube on the topper; the
connection will be tight.
7. Place the topper on the liner.
8. Fill the liner with enough water to
keep the pump fully submerged
during operation.
9. Connect the adapter to the long
pump cable.
10. Plug the adapter into a properly
grounded GFCI outlet.
NOTE:

ASSEMBLY

CY23F0035 07/2023 Page 3 / 3
• If water is not flowing within several moments of the fountain being plugged in, ensure that the pump is fully submerged
underwater. Add water to the reservoir if necessary. The pump may have air bubbles trapped inside, which can prevent
water from circulating properly. Unplug the power supply for a few moments and plug it back in.
• Check the flow control on the body of the pump, it may need to be adjusted to achieve the desired water flow rate.
• Inspect the pump and tubing for obstructions.
• Pump noise can be caused by trapped air, low water level, or the pump being too close to the walls of the fountain.
While the pump is fully submerged, try gently tapping the pump with your finger to help release the trapped air. Also,
check if adding water or moving the pump helps to reduce noise.
• If water is not flowing and the lights do not turn on, ensure the AC adapter is fully connected to the pump power cable. If
only the light is not working, ensure the cables are fully connected, and the seal is adequately tightened (do not over-tighten).
Ensure the connector ends are completely dry before connecting and plugging the power cord back into an outlet.
• Check to make sure the power outlet is working; consult a certified electrician if in doubt about electrical connections.
Troubleshooting

IMPORTANT SAFETY INFORMATION
• Keep fountain out of reach of children and pets.
• Make sure the power cord is away from traffic areas.
• Keep power cord away from all heat sources. Do not use electrical cords in areas with high temperatures.
• Check the water level frequently to ensure the pump remains fully submerged; never allow the pump to run dry as it will burn
out the motor.
• Always unplug the power supply before cleaning and maintaining the fountain and the recirculating pump.
• Always empty and store the fountain and pump indoors during freezing weather.
• Do not use fountain in areas that can be damaged if water splashes or leaks.
• Some splashing may occur; adjust the flow rate on the pump if the water rate is too high. Do not use fountain in areas
that can be damaged if water happens to splash or leak.
• Some climates and weather conditions increase water evaporation, requiring water to be added more frequently.
Frequently check water levels during times of high temperatures, wind, and long-term exposure to direct sunlight to
ensure the pump remains underwater. Never allow the pump to run dry as it will burn out the motor.
• Only use water in this fountain. Distilled water will help prevent mineral buildup but is not required. Tap water is okay
to use, but avoid heavily chlorinated water as it may damage the fountain and the pump.
• Periodically change the water to help keep the fountain and pump clean. Remove scale and buildup regularly.
DO NOT use harmful additives such as bleach, chlorine, etc.
DO NOT use anything that is abrasive to scrub the fountain.
DO NOT use a pressure washer to clean the fountain.
• Always unplug the power supply before cleaning and maintaining the fountain and the recirculating pump. Take care
when handling the pump; only pick it up by the body of the pump, never the power cord.
• During freezing weather, drain the fountain, disconnect the pump and store indoors; allowing ice to form may damage
the fountain in such ways as, but not limited to, fountain cracking, permanent pump damage and/or lighting malfunction.
• Over time, the finish may gradually mellow in color due to sun exposure; this is part of the natural aging process and
is not cause for return.
Care & Maintenance
If you experience issues with assembly or the product was damaged during shipping,
please contact our customer service team through one of the methods mentioned at the top of page 1.
Please have the item number and order information ready to expedite response time.
WARNING:

indirect, or incidental, resulting from the incorrect attachment, improper use, inadequate maintenance, or neglect of this product.