Sunricher SR-2400TL-IN User manual

Панель SR-2400TL-IN White/Black
Feature
Standard DALI Master , SR-2400TL-IN control 4 DALI Addresses, SR-2400TG-IN control 4 groups,
SR-2400TS-IN control 4 scenes.
Parameter
Part No. Operation Voltage Output
SR-2400TL-IN Provided by DALI bus 86x86x29.1
DALI Signal
Dimensions
SR-2400TG-IN Provided by DALI bus 86x86x29.1DALI Signal
SR-2400TS-IN Provided by DALI bus 86x86x29.1
DALI Signal
Wiring diagram
Comply to DALI standard protocol IEC60929 and in compliance with DALI products from other international
incorporation.
With bus detective function, one channel DALI bus can install multiple dimming controllers.
No external power supply which is provided by DALI bus. Consumption current is 4mA.
Enable to select different single light address, group address for controlling by encoding switch.
Up to 4 single light addresses or 4 group addresses for switch and dimming control.
Controlled by external switch, convenient and flexible, with small size, it can be easily placed into 86 X 86 mm
box.
SR-2400TL-IN SR-2400TG-IN SR-2400TS-IN
Product Size
D1 D1 D2 D2
012
3
4
5
6
7
89
012
3
4
5
6
7
89
(x10)
(x1)
Brief introduction of buttons
For DALI Dimmable led Drivers and dali master
Starting Number
(Setting the starting DALI Address(SR-2400TL-IN), the
starting Group Number,(SR-2400TG-IN),
the starting Scene Number(SR-2400TS-IN)
1x(1~9)
10x(1~9)
D1 D1 D2 D2
012
3
4
5
6
7
89
012
3
4
5
6
7
89
(x10)
(x1)
DALI bus
123
4
GND
Power Supply
12-36VDC
LN
110V-230VAC
123
4
GND
SR-2303B
RGB or single color LED strip
DALI Master/
DALI Master software
via computer
29.1
86.0
86.0
A.White & black plate are available
B.DALI bus powered
C.Start address from 01 to 64.
D. Perfect for industry hall /warehouse / classrooms /single office /large office /meeting room / corridor
Installation

Lamp1 Group2
Group3 Group4
Lamp
Set starting number for DALI masters
Set the starting number “X” on SR-2400TL-IN(with 64 dali
address) K1 control X dali address ,
K2 control X+1 dali adrees ,
K3 control X+2 DALi address ,
K4 control X+3 DALi Address
Set the starting number “X” on SR-2400TG-IN (with
16groups) K1 control X group ,
K2 control X+1 group ,
K3 control X+2 group ,
K4 control X+3 group
Set the starting number on SR-2400TS-IN (with 16
scenes) K1 control X scene ,
K2 control X+1 scene,
K3 control X+2 scene ,
K4 control X+3 scene
Note:
1.keep the starting number on the DALI Master with the same first dali address on dali dimmers, same first
group number , same first scene number the compute Programmed..
2. The groups and scenes need to be programmed on computer, then can work with our SR-2400TG-IN, SR-
Operation
Description of buttons
Group1 Group3
Group2 Group4
Scene1
Scene2
Scene3
Scene4
2400TS-IN.
Safety & Warnings
Warranty Agreement
1) The product shall be installed and serviced by a qualified person.
2) IP20.Please avoid the sun and rain. When installed outdoors, please ensure it is mounted in a water proof
enclosure.
3) Always be sure to mount this unit in an area with proper ventilation to avoid overheating.
4) Please check if the output voltage of any LED power supplies used comply with the working voltage of the
product.
5) Never connect any cables while power is on and always assure correct connections to avoid short circuits
before switching on.
6)
7) For update information please consult your supplier.
Please ensure that the cable is secured tightly in the connector
1) We provide lifelong technical assistance with this product:
3-year warranty. We print date on every products, for example :1125 means year 2011,week 25.The
warranty is for free repair or replacement and covers manufacturing faults only.
For faults beyond the 3-year warranty we reserve the right to charge for time and parts.
2) Limited Warrenty
Any defects caused by wrong operation.
Any damages caused by unauthorized removal, maintenance, modifying, incorrect connection and
replacement of chips.
Any damages due to transportation, vibration etc. after purchase.
Any damages caused by earthquake, fire, lightning, pollution and abnormal voltage.
Any damages caused by negligence, inappropriate storing at high temperatures and humidity or near
harmful chemicals.
Product has been updated
3) Repair or replacement as provided under this warranty is the exclusive remedy to the customer.
Group Scene
Short press:ON/OFF
Hold finger down:dimming up
/dimming down
Dim from 0.1% to 100%brightness
Short press to recall four different group
Hold finger down:dimming up
/dimming down
Dim from 0.1% to 100%brightness
Short press to recall four
different scenes