Superatv Fbg-p-ran-09-xp User manual

INSTALLATION INSTRUCTIONS

Curved Front Fender Protectors

for Polaris Ranger® XP

Thank You

For Choosing

Right Tube

Left Tube

Left Bracket

Right Bracket

(kit contents continue on following page)

2753 Michigan Road • Madison, Indiana 47250 • 855-743-3427

Need help with your installation?

www.superatv.com

8:00am - 9:00pm EST M-Th

8:00am - 7:00pm EST Friday

9:00am - 2:00pm EST Saturday

sales@superatv.com

1-855-743-3427

Read instructions and view illustrations before beginning.

SuperATV Front Brush Guard FBG-P-RAN-09-XP must be installed

IN-CFFP-P-RAN-09+ 2

Remove

(driver side)

(kit contents continued)

M10-1.50 x 30 mm Lg. FHCS2xM8-1.25 x 25 mm Lg. FHCS4x

4x 1/4”-20 x 1-1/4” Lg. Self Tap

- Remove upper and lower Torx screws from Fender Flares.

Liability Statement

SuperATV’s®products are designed to best fit user’s ATV/UTV under stock conditions. Adding, modifying, or fabricating any factory or aftermarket parts will void any warranty

provided by SuperATV®and is not recommended. SuperATV’s® products could interfere with other aftermarket accessories. If user has aftermarket products on machine, contact

SuperATV®to verify that they will work together.

Although SuperATV®has thousands of satisfied customers, user should be aware that installing lift kits, long travel, or suspension kits, tires, etc. will change the ride of machine

and may increase maintenance and part wear. Operating any off-road machine while, or after, consuming alcohol and/or drugs increases risk of bodily harm or death. No

warranty or representation is made as to this product’s ability to protect user from severe injury or death. SuperATV®urges operators and occupants to wear a helmet and

appropriate riding gear at all times.

By purchasing and installing SuperATV®products, user agrees that should damages occur, SuperATV®will not be held responsible for loss of time, use, labor fees, replacement

parts, or freight charges. SuperATV®, nor any 3rd party, will not be held responsible for any direct, indirect, incidental, special, or consequential damages that result from any

product purchased from SuperATV®. The total liability of seller to user for all damages, losses, and causes of action, if any, shall not exceed the total purchase price paid for the

product that gave rise to the claim.

SuperATV®will warranty only parts provided by SuperATV®. Any damage or problems with OEM housings, bearings, seals, or other manufacturers’ products will not be covered

by SuperATV®. SuperATV®parts and products are not warrantied if item was not installed properly, misused, or modified.

Installing, adding, modifying, or fabricating any factory or aftermarket product to your ATV/UTV may violate certain local, state, and federal laws. Be advised that laws vary

depending on town, city, county, state, etc. Use of certain products on public streets, roads, or highways may be in violation law. The Buyer is solely and exclusively legally and

personally responsible for any violation of the law by the installation or use of the product. You must abide by all local, state, and federal laws, including but not limited to vehicle

safety, traffic laws, and ordinances. It is your responsibility to know the laws and how they apply to you.

The Buyer is responsible to fully understand the capability and limitations of his/her vehicle according to manufacturer specifications, warnings and instructions and agrees to

hold SuperATV®harmless from any damage resulting from failure to adhere to such specifications, warnings and/ or instructions. The Buyer is also responsible to obey all

applicable federal, state, and local laws and ordinances when operating his/her vehicle while using this product, and the Buyer agrees to hold SuperATV®harmless from any

violation thereof.