Superfront TAKUMI HIGH User manual

Mounting instructions TAKUMI HIGH & LOW 1/2
Security!
Superfront /+46868441814 / [e-mail] / www.superfront.com
Content
1 x Mounting kit
5-6 x Flat brackets
(depending on model)
IMPORTANT!
Fit the bridge piece between the two side pieces
using the mounting kit provided.
Fasten all flat brackets with the supplied screws into
the recesses on the leg stand.
Place your furniture upside down on a flat surface
covered with protective material to avoid scratches.
3.
1 x Bridge piece
2 x Side pieces
We recommend two people for the assembly as the
furniture will be turned upside down. The same applies
if the furniture is to be moved – get help from a friend
to li the furniture instead of pulling/pushing it.
2.
1.
.
1.
3 x Screws per bracket
x 2 x 2 x 4
x 2
END
Be sure to always follow the safety instructions that apply to your furniture. Always secure the cabinet to the wall.
This also applies to low cabinets where the weight distribution changes drastically when the fronts open.
Especially in the case of solid quality fronts as ours. Use the anchor brackets supplied with the Ikea cabinet.

Side view
Front view
The result varies depending on the width of the furniture/leg.
Place your Takumi leg upside down on the
boom of the furniture and secure all the flat
brackets in place with the supplied screws.
4.
With the help of a friend, li the furniture to
turn it back over. Then put it straight down in
its place and behold the result!
5.
Mounting instructions TAKUMI HIGH & LOW 2/2
Security!
Superfront /+46868441814 / [e-mail] / www.superfront.com
Be sure to always follow the safety instructions that apply to your furniture. Always secure the cabinet to the wall.
This also applies to low cabinets where the weight distribution changes drastically when the fronts open.
Especially in the case of solid quality fronts as ours. Use the anchor brackets supplied with the Ikea cabinet.
4.