Superfront TAKUMI User manual

Mounting instructions TAKUMI SHELF 1/2
Superfront /+46868441814 / [e-mail] / www.superfront.com
Content
4 x MountPads per shelf
IMPORTANT!
Aach the blocks to the slats using the screws
provided. It is important that this is done by hand
with a screwdriver – not by machine. And don't use
all your strength as the screw is self-tapping.
Measure where on the wall you need to drill to get
the shelf where you want it. Keep in mind that the
brackets should be mounted at a distance from the
edge of the shelf. We recommend at least 10 cm.
Drill, plug and finally screw the brackets in place.
The longer end of the slat should be upwards.
3.
TIP!
1-3 Shelves (depending on model)
2 x Blocks per shelf
2 x Slats
END
Screws for mounting the shelf to the wall are not
included. Examine your wall to determine what type of
screws and plugs you need to buy and where you can
drill. The diameter of the screw must not exceed 6 mm.
SIDEVIEW
2.
1.
A spirit level or equivalent will help
you get the shelf straight.
4 x Screws per shelf

Stick the supplied MoundPads to the top of the
blocks. Leave the protective plastic on so you can
practice once to put the shelf in the right place.
Remove the plastic, put the shelf in place and
press lightly to secure its position. All done!
4.
5.
FRONTVIEW
Mounting instructions TAKUMI SHELF 2/2
SIDEVIEW
Superfront /+46868441814 / [e-mail] / www.superfront.com