Supero BPN-SAS2-847DR Backplane User manual

Rev. 1.0
BPN-SAS2-847DR Backplane
USER'S GUIDE
13
64
1
5
10
6
1
2
3
123
A
C
A
C
1
12
1
12
612
18
1924
7
12
19
24
DESIGNED IN USA
BPN-SAS2-847DR
REV:1.02
A
E
I
6 5 4
B
C
D
F
G
H
3 2 1
PRESSFIT
A
E
I
6 5 4
B
C
D
F
G
H
3 2 1
PRESSFIT
A
E
I
6 5 4
B
C
D
F
G
H
3 2 1
PRESSFIT
A
E
I
6 5 4
B
C
D
F
G
H
3 2 1
PRESSFIT
A
E
I
6 5 4
B
C
D
F
G
H
3 2 1
PRESSFIT
A
E
I
6 5 4
B
C
D
F
G
H
3 2 1
PRESSFIT
A
E
I
6 5 4
B
C
D
F
G
H
3 2 1
PRESSFIT
A
E
I
6 5 4
B
C
D
F
G
H
3 2 1
PRESSFIT
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
++
+
+
+
A
2
C
1
B
D
34
PRESSFIT
A
2
C
1
B
D
34
PRESSFIT
BAR CODE
MH1MH4
U78
JPW1
C195
C191
BC52
JPW2
U77
D54
D53
Q1
Q2
Q9
JP1
JP3
U21 U3 U65U67 U9U15
S_M4 S_M3 S_M2 S_M1
P_M4 P_M3 P_M2 P_M1
EC39
EC41
EC42
EC47
EC37
EC38
EC46
EC48
EC40
EC49
EC43
EC44
EC45
EC14
EC15
EC16
EC17
EC30
EC31
EC32
EC33
EC34
EC35
EC36
J26
J27
L1
R24 R12
R15
R18
R9 R3
R6
R21
R80
R83
R88
R85
C99
C164
C163
C162
C161
C120
C117
C114
C105
C108
C102
C14 C10
C111
SUPER ®

BPN-SAS2-847DR Backplane User’s Guide
ii
Manual Revision 1.0
Release Date: October 14, 2013
The information in this User’s Manual has been carefully reviewed and is believed to be accurate.
The vendor assumes no responsibility for any inaccuracies that may be contained in this document,
makes no commitment to update or to keep current the information in this manual, or to notify any
person or organization of the updates. Please Note: For the most up-to-date version of this
manual, please see our web site at www.supermicro.com.
Super Micro Computer, Inc. ("Supermicro") reserves the right to make changes to the product
described in this manual at any time and without notice. This product, including software and
documentation, is the property of Supermicro and/or its licensors, and is supplied only under a
license. Any use or reproduction of this product is not allowed, except as expressly permitted by
the terms of said license.
IN NO EVENT WILL SUPERMICRO BE LIABLE FOR DIRECT, INDIRECT, SPECIAL, INCIDENTAL,
SPECULATIVE OR CONSEQUENTIAL DAMAGES ARISING FROM THE USE OR INABILITY TO
USE THIS PRODUCT OR DOCUMENTATION, EVEN IF ADVISED OF THE POSSIBILITY OF
SUCH DAMAGES. IN PARTICULAR, SUPERMICRO SHALL NOT HAVE LIABILITY FOR ANY
HARDWARE, SOFTWARE, OR DATA STORED OR USED WITH THE PRODUCT, INCLUDING THE
COSTS OF REPAIRING, REPLACING, INTEGRATING, INSTALLING OR RECOVERING SUCH
HARDWARE, SOFTWARE, OR DATA.
Any disputes arising between manufacturer and customer shall be governed by the laws of Santa
Clara County in the State of California, USA. The State of California, County of Santa Clara shall
be the exclusive venue for the resolution of any such disputes. Super Micro's total liability for all
claims will not exceed the price paid for the hardware product.
California Best Management Practices Regulations for Perchlorate Materials: This Perchlorate
warning applies only to products containing CR (Manganese Dioxide) Lithium coin cells. “Perchlorate
Material-special handling may apply. See www.dtsc.ca.gov/hazardouswaste/perchlorate”
WARNING: Handling of lead solder materials used in this
product may expose you to lead, a chemical known to
the State of California to cause birth defects and other
reproductive harm.
Unless you request and receive written permission from Super Micro Computer, Inc., you may not
copy any part of this document.
Information in this document is subject to change without notice. Other products and companies
referred to herein are trademarks or registered trademarks of their respective companies or mark
holders.
Copyright © 2013 by Super Micro Computer, Inc.
All rights reserved.
Printed in the United States of America

Preface
iii
Table of Contents
Contacting Supermicro.......................................................................................iv
Returning Merchandise for Service.....................................................................v
Chapter 1 BPN-SAS2-847DR Safety Guidelines
1-1 ESD Safety Guidelines ................................................................................... 1-1
1-2 General Safety Guidelines .............................................................................. 1-1
1-3 An Important Note to Users ............................................................................ 1-2
1-4 Introduction to the BPN-SAS2-847DR Backplane .......................................... 1-2
Chapter 2 Connectors, Jumpers and LEDs
2-1 Overview of the SC847D Chassis Conguration............................................ 2-1
2-2 BPN-SAS2-847DR Backplane Front Connectors ........................................... 2-2
2-3 BPN-SAS2-847DR Rear SAS2 Receptacles .................................................. 2-4

BPN-SAS2-847DR Backplane User’s Guide
iv
Contacting Supermicro
Headquarters
Address: Super Micro Computer, Inc.
980 Rock Ave.
San Jose, CA 95131 U.S.A.
Tel: [phone]
Fax: [phone]
Email: [email protected] (General Information)
[email protected] (Technical Support)
Web Site: www.supermicro.com
Europe
Address: Super Micro Computer B.V.
Het Sterrenbeeld 28, 5215 ML
's-Hertogenbosch, The Netherlands
Tel: [phone]
Fax: [phone]
Email: [email protected] (General Information)
[email protected] (Technical Support)
[email protected] (Customer Support)
Asia-Pacic
Address: Super Micro Computer, Inc.
3F, No. 150, Jian 1st Rd.
Zhonghe Dist., New Taipei City 23511
Taiwan (R.O.C)
Tel: [phone]
Fax: [phone]
Web Site: www.supermicro.com.tw
Technical Support:
Email: [email protected]
Tel: [phone]

Preface
v
Returning Merchandise for Service
A receipt or copy of your invoice marked with the date of purchase is required be-
fore any warranty service will be rendered. You can obtain service by calling your
vendor for a Returned Merchandise Authorization (RMA) number. When returning to
the manufacturer, the RMA number should be prominently displayed on the outside
of the shipping carton, and mailed prepaid or hand-carried. Shipping and handling
charges will be applied for all orders that must be mailed when service is complete.
For faster service, RMA authorizations may be requested online (http://www.super-
micro.com/support/rma/).
Whenever possible, repack the backplane in the original Supermicro box, using the
original packaging materials. If these are no longer available, be sure to pack the
backplane in an anti-static bag and inside the box. Make sure that there is enough
packaging material surrounding the backplane so that it does not become damaged
during shipping.
This warranty only covers normal consumer use and does not cover damages in-
curred in shipping or from failure due to the alteration, misuse, abuse or improper
maintenance of products.
During the warranty period, contact your distributor rst for any product problems.

BPN-SAS2-847DR Backplane User’s Guide
vi
Notes

1-1
Chapter 1: BPN-SAS2-847DR Safety Guidelines
Chapter 1
BPN-SAS2-847DR Safety Guidelines
To avoid personal injury and property damage, carefully follow all the safety steps
listed below when accessing your system or handling the components.
1-1 ESD Safety Guidelines
Electrostatic Discharge (ESD) can damage electronic components. To prevent dam-
age to your system, it is important to handle it very carefully. The following measures
are generally sufcient to protect your equipment from ESD.
•Use a grounded wrist strap designed to prevent static discharge.
•Touch a grounded metal object before removing a component from the antistatic
bag.
•Handle the backplane by its edges only; do not touch its components, peripheral
chips, memory modules or gold contacts.
•When handling chips or modules, avoid touching their pins.
•Put the backplane and peripherals back into their antistatic bags when not in
use.
1-2 General Safety Guidelines
•Always disconnect power cables before installing or removing any components
from the computer, including the BPN-SAS2-847DR backplane.
•Disconnect the power cable before installing or removing any cables from the
BPN-SAS2-847DR backplane.
•Make sure that the BPN-SAS2-847DR backplane is securely and properly
installed on the motherboard to prevent damage to the system due to a power
shortage.

1-2
BPN-SAS2-847DR Backplane User's Guide
1-3 An Important Note to Users
All images and layouts shown in this user's guide are based upon the latest PCB
revision available at the time of publishing. The backplane you have received may
or may not look exactly the same as the graphics shown in this manual.
1-4 Introduction to the BPN-SAS2-847DR Backplane
The BPN-SAS2-847DR backplane has been designed to utilize the most up-to-date
technology available, providing your system with reliable, high-quality performance.
This manual reects BPN-SAS2-847DR Revision 1.02, the most current releases
available at the time of publication. Always refer to the Supermicro web site at www.
supermicro.com for the latest updates, compatible parts and supported congura-
tions.

2-1
Chapter 2: Connectors, Jumpers and LEDs
Chapter 2
Connectors, Jumpers and LEDs
2-1 Overview of the SC847DChassisConguration
The SC847D chassis configuration consists of the following components:
One BPN-SAS2-847DF front backplane, one BPN-SAS2-847DR rear backplane,
one or two BPN-EXP-847DF2EL1 front expander card(s), one or two BPN-EXP-
847DR1EL1 rear expander card(s), and a total of thirty-six MCP-280-00024-0N
adapter cards in double-depth hard drive carriers. Refer to the SC847D chassis
manual for removal and installation instructions.
Front Backplane Bracket
Rear Backplane Bracket
Front Backplane
BPN-SAS2-847DF
Rear Backplane
BPN-SAS2-847DR
MCP-280-00024-0N Adapter Card
(Shown without 3.5" HDDs)
MCP-280-00024-0N Adapter Card
(Shown Beneath 3.5" HDDs)
Primary Front Expansion
Board BPN-EXP-
847DF2EL1
Secondary Front Expansion Board
(Optional) BPN-EXP-847DF2EL2
Rear Expansion Board
BPN-EXP-847DR1EL1
Figure2-1:SC847DChassisConguration

2-2
BPN-SAS2-847DR Backplane User's Guide
13
64
1
5
10
6
1
2
3
123
A
C
A
C
1
12
1
12
612
18
1924
7
12
19
24
DESIGNED IN USA
BPN-SAS2-847DR
REV:1.02
A
E
I
6 5 4
B
C
D
F
G
H
3 2 1
PRESSFIT
A
E
I
6 5 4
B
C
D
F
G
H
3 2 1
PRESSFIT
A
E
I
6 5 4
B
C
D
F
G
H
3 2 1
PRESSFIT
A
E
I
6 5 4
B
C
D
F
G
H
3 2 1
PRESSFIT
A
E
I
6 5 4
B
C
D
F
G
H
3 2 1
PRESSFIT
A
E
I
6 5 4
B
C
D
F
G
H
3 2 1
PRESSFIT
A
E
I
6 5 4
B
C
D
F
G
H
3 2 1
PRESSFIT
A
E
I
6 5 4
B
C
D
F
G
H
3 2 1
PRESSFIT
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
++
+
+
+
A
2
C
1
B
D
34
PRESSFIT
A
2
C
1
B
D
34
PRESSFIT
BAR CODE
MH1MH4
U78
JPW1
C195
C191
BC52
JPW2
U77
D54
D53
Q1
Q2
Q9
JP1
JP3
U21 U3 U65U67 U9U15
S_M4 S_M3 S_M2 S_M1
P_M4 P_M3 P_M2 P_M1
EC39
EC41
EC42
EC47
EC37
EC38
EC46
EC48
EC40
EC49
EC43
EC44
EC45
EC14
EC15
EC16
EC17
EC30
EC31
EC32
EC33
EC34
EC35
EC36
J26
J27
L1
R24 R12
R15
R18
R9 R3
R6
R21
R80
R83
R88
R85
C99
C164
C163
C162
C161
C120
C117
C114
C105
C108
C102
C14 C10
C111
Front Connectors
1. Main Power Connector: JPW1
2. Main Power Connector: JPW2
3. Primary Expander Power
Connector: J26
4. Primary Airmax Connectors:
P_M1 to P_M4
5. Secondary Expander Power
Connector: J27
6. Secondary Airmax Connectors:
S_M1 to S_M4
Figure 2-2: BPN-SAS2-847DR Backplane Front Connectors
2-2 BPN-SAS2-847DR Backplane Front Connectors
1
1
1
31 5
1
2
1
41 6

2-3
Chapter 2: Connectors, Jumpers and LEDs
1. - 2. Power Connectors
These connectors, designated JPW1 and-
JPW2 supply power to the backplane.
4. Primary Airmax Connectors
These connectors are SAS2 signal con-
nectors that connect the backplane and the
primary expander board. These connectors
are designated P-M1 through P_M4.
6. Secondary Airmax Connectors
These connectors are SAS2 signal con-
nectors that connect the backplane and the
secondary expander board. These connec-
tors are designated S-M1 through S_M4.
3. Primary Expander Power Connector
Supplies power to the primary expander
board. This connector is designated J26.
5. Secondary Expander Power Connector
Supplies power to the secondary expander
board. This connector is designated J27.

2-4
BPN-SAS2-847DR Backplane User's Guide
2-3 BPN-SAS2-847DR Rear SAS2 Receptacles
1
6
3
4
1
6
5
10
12 1
12
1
S1
S7
P1
P15 E1
E6
E7
S8
S28
E17
E25 E16
S1
S7
P1
P15 E1
E6
E7
S8
S28
E17
E25 E16
S1
S7P1
P15 E1E6
E7S8
S28E17
E25 E16
S1
S7
P1
P15 E1
E6
E7S8
S28E17
E25 E16
S1
S7
P1
P15 E1
E6
E7
E25 E16
S1
S7P15 E1
E7
S8
S28
E17
E25 E16
S1
S7
P1
P15 E1
E6
E7
S8S28E17
E25 E16
S1
S7
P1
P15 E1
E6
E7
S8
E17
E25 E16
S1
P15
E7E25
S1
S7
P1 E1
E6
E7
S28
E17
E25 E16
S1
S7
P1
P15 E1
E6
E7
E25
S1
S7
P1
P15 E1
E6
E7
E25
A
B
C
D
E
F
G
H
I
654321
A
B
C
D
E
F
G
H
I
654321
A
B
C
D
E
F
G
H
I
654321
A
B
C
D
E
F
G
H
I
654321
A
B
C
D
E
F
G
H
I
654321
A
B
C
D
E
F
G
H
I
654321
A
B
C
D
E
F
G
H
I
654321
A
B
C
D
E
F
G
H
I
654321
1 2 3 4
A
B
C
D
1 2 3 4
A
B
C
D
Q5
U73
U74
J24
J23
J22
J21
J20
J19
J18
J17
J16J15
J14J13
SAS
#16,#17
SAS
#18,#19
SAS
#20,#21
SAS
#22,#23
SAS
#14,#15
SAS
#12,#13
SAS
#8,#9
SAS
#10,#11
SAS
#6,#7
SAS
#4,#5
SAS
#2,#3
#0,#1
SAS
SAS #0,#1
#8,#9
#16,#17
#2,#3
#10,#11
#18,#19
#4,#5
#12,#13
#20,#21
#6,#7
#14,#15
#22,#23
Rear SAS2 Receptacles
Rear Receptacle SAS Drive Number Reference
SAS #0, #1 HDD 0, 1 J13
SAS #2, #3 HDD 2, 3 J14
SAS #4, #5 HDD 4, 5 J15
SAS #6, #7 HDD 6, 7 J16
SAS #8, #9 HDD 8, 9 J17
SAS #10, #11 HDD 10, 11 J18
SAS #12, #13 HDD 12, 13 J19
SAS #14, #15 HDD 14, 15 J20
SAS #16, #17 HDD 16, 17 J21
SAS #18, #19 HDD 18, 19 J22
SAS #20, #21 HDD 20, 21 J23
SAS #22, #23 HDD 22, 23 J24
Figure 2-3: BPN-SAS2-847DR Rear SAS2 Receptacles

2-5
Chapter 2: Connectors, Jumpers and LEDs
Notes

2-6
BPN-SAS2-847DR Backplane User's Guide
Disclaimer (cont.)
The products sold by Supermicro are not intended for and will not be used in life sup-
port systems, medical equipment, nuclear facilities or systems, aircraft, aircraft devices,
aircraft/emergency communication devices or other critical systems whose failure to per-
form be reasonably expected to result in signicant injury or loss of life or catastrophic
property damage. Accordingly, Supermicro disclaims any and all liability, and should
buyer use or sell such products for use in such ultra-hazardous applications, it does so
entirely at its own risk. Furthermore, buyer agrees to fully indemnify, defend and hold
Supermicro harmless for and against any and all claims, demands, actions, litigation,
and proceedings of any kind arising out of or related to such ultra-hazardous use or
sale.