Surgically Clean Air Carbon Granite SCA4000R User manual

3
Remove the Carbon Filter
Place fingers under each pull handle on
the top le and right sides of the electronic
cell holder and pull forward, evenly and
firmly, to dislodge the magnetic bracket
holders and tip the holder open
Pull out the carbon filter from behind the
electronic cell by using the green tab on
the right hand side of the carbon filter
Remove the carbon filter from the
protective plastic bag
A
B
C
Reinsert the carbon filter back into the slot
with the green tab in the top right corner
D
1
Unpack the Air Purifier
2
Remove the Front Panel
A Remove the 2 (two) pieces of shipping tape
holding on the front panel. Discard the tape
B Remove the front panel
A Remove the Carbon Granite Air Purifier
from the shipping carton
Quick Set-Up Guide
Carbon Granite (SCA4000R)

To view our series of ‘How to Guides’ such as Monthly Maintenance, Changing Carbon Filter,
Changing UV-C Bulbs... please visit: http://www.surgicallycleanair.com/how-to-guides.html
MAKING YOUR INDOOR
AIR THIS CRYSTAL CLEAR
Quick Set-Up Guide
Carbon Granite (SCA4000R)
5
Turn ON the Air Purifier
Plug the unit into a wall outlet
Turn the ‘POWER’ button on
Set your desired fan speed
(Low, Medium, High, or Auto)
A
B
Replace the front panel
B
C
If desired you can set the ‘TIMER’
(4 hours, 8 hours, or 12 hours)
D
Make sure that the ‘UV LAMP’ is ON (lit when on) to ensure that the air purifier’s
germ killing function is activated
E
If desired, turn the negative ions ON by pressing the ‘NEG. ION’ button (lit when
on) to re-energize the air as it leaves the air purifier and enters the room
F
Push the electronic cell back in place
within the air purifier
A
4
Reset the Air Purifier