Surgically Clean Air DE 2.0 User manual

JA D E ™ 2 .0 ( S CA5 100C)
OP ERA TION M A NUA L
Read th e manual th orough ly b efore
op eration and retain for future reference.
E P A
E stab lish ment#
1002 31-CHN -001
AUTO
23
E 5 2 05 81

TA BLE OF C ONTENTS
S AF E TY P RE CAU TI ON S
HOW I T W ORK S
F E ATU RE S AN D S P E CI F I CATI ON S
P ART N AME
I N S TALLATI ON
OP E RATI ON
CARE AN D MAI N TE N AN CE
TROU B LE S HOOTI N G
4-7
8
9
10
11
12 -14
15 -17
18

04
SA F ETY P REC A UTIONS 1
B e sure to follow all p recautions b elow:
Running E nvi ronment Cautions

U se only a 12 0-vo lt outlet with grounding wire recep tacle.

D o not p ut it in rooms with h igh h eat, damp or wet p laces.

B est worki ng condition is 10-40
0
C
.
 evel the unit well, never use unit when it is tilted or laying down.
 To reduce the ris of electric shoc, this equipment has a grounding type plug that has a third (grounding) pin.
This plug will only fit into a grounding type power outlet. If the plug does not fit into the outlet, contact qualified
p ersonnel to install th e p rop er outlet. D o not alter th e p lug in any way.
U nit Op eration
 o not insert fingers or foreign obects into the intae or air outlet.
 eep hair, loose clothing, fingers and all parts of body away from openings and moving parts.
 o not bloc the air intae and air outlet.
N eve r insert small th ings into th e air intake / outlet.
 o not use the air purifier if the power cord or plug is damaged or the connection to the wall outlet is loose.
 hen removing the power plug, always hold the plug and never pull by the cord.
 o not use the unit near or on hot obects, such as range or where it may be eposed to steam.
 Stop the unit and unplug the power when moving or maintenance. lways hold the handles on the side
of th e unit wh en movi ng it.
 To avoid causing fire and/or shoc do not attempt to disassemble the unit - only certified technicians
sh ould do th is.
 o not wash or reuse the HP- filter and the ctivated carbon filter.
WARNING
The internal UV-C  contains a small amount of
mercury wh ich is contained inside th e  unless
b roke n. Mercury and mercury compounds are nown to
the State of California to cause b irth defects or oth er
rep roductive h arm.
F o r m o r e i n f o r m a t i o n g o t o w w w . P 6 5 W a r n i n g s . c a . g o v

05
SA F ETY P REC A UTIONS 2
Th is p roduct comp lies with th e maxi mum allowab le concentration of ozo ne of 0.05 0 p arts p er million b y vo lume
( p p mv ) in a 2 4-h our p eriod. Th e Health Canada G uideline 2 010 recommends th at th e maxi mum exp osure limit,
b ased on an ave raging time of 8 h ours, is 0.02 0 p p mv or less wh en tested in a sealed, controlled room
ap p roxi mately 30 m³ .
Ce p roduit est conforme ave c la concentration maxi male p ermise d’ ozo ne de 0,05 0 p arties p ar million p ar
vo lume ( p p mv) p endant une p é riode de 2 4 h eures. La Ligne directrice ( 2 010) de S anté Canada recommande un
nive au maxi mal d' exp osition, b asé sur un moyen de 8 h eures, soit 0,02 0 p p mv ou moins dans une ch amb re de
teste é tanch é e et contrô lé e de 30 m³ .
INTENDED USE
The ADE. Air Purifier is intended to remove particles and microorganisms from the air.
UTIISATION PREUE
Le purificateur d'air ADE. est destine a liminer les particules et les micro-organismes de l'air.
DIRECTIONS FOR USE
Plug the power cord in and you will hear a Beep. The small, inner circle will turn green - this indicates the air
purifier is in standby mode. Use your hand to wave over the sensor, this waving motion turns the unit on  off,
and can also adjust the fan speed.
MODE DEMPOI
Branchez le cordon d'alimentation et vous entendrez un ( bip . Le petit cercle interieur deviendra vert - ce
indique que le purificateur d'air est en mode veille. Utilisez votre main pour agiler le capteur, ce mouvement
d'ondulation allume et eteint 'unite et peut egalement ajuster la vitesse du ventilateur.
DISPOSA INSTRUCTIONS
Dispose of filters and UV-C lamps according to local regulations based on location of use (e.g. medical waste if
used in a medical setting such as dental clinics, laboratories, etc.).
INSTRUCTIONS DEIMINATION
Eliminez les filtres conformement aux reglementations locales en fonction du lieu.

06
SAFETY PRECAUTIONS 3
WARNING - The internal UV-C lamp contains a small amount of mercury which is contained inside the
bulb unless broken. Mercury and mercury compounds are known to the State of California to cause birth
defects or other reproductive harm. For more information, go to www.p65warnings.ca.gov.
The following safety warnings as per regulatory requirements of PCPA (Pest Control Products Act) in Canada:
Avertissements de securite selon Ies exigences reglementaires de Ia PCPA (Loi sur Ies produits
antiparasitaires) au Canada.
PRECAUTIONS
-READ THE LABEL AND ANY OPERATING MANUAL BEFORE USING
-KEEP OUT OF THE REACH OF CHILDREN
-WARNING - UV radiation only emitted internally in this device.
-Unintended use of the device, or damage to the housing, may result in exposure to ultraviolet radiation.
-Ultraviolet radiation may cause eye and skin irritation.
-Avoid exposing eyes and skin to ultraviolet radiation.
-The use of this device is a supplement to and not a substitute for standard infection control practices; users
must continue to follow all current infection control practices, including those practices related to cleaning and
disinfection of environmental surfaces.
FIRST AID INSTRUCTIONS
Clean the injury using soap and warm water, apply antibiotic ointment and a bandage, and watch for signs of
infection.
INSTRUCTIONS DE PREMIERS SOINS
Nettoyez la blessure avec du savon et de l'eau tiede, appliquez une pommade antibiotique et un pansement et
surveillez les signes d'infection.

07
SA F ETY P REC A UTIONS 4
F C C W a r n i n g s t a t e m e n t s
Th is devi ce comp lies with P art 15 of th e F CC Rules. Op eration is sub j ect to th e following two conditions: ( 1) th is
devi ce may not cause h armful interference, and ( 2 ) th is devi ce must accep t any interference receive d, including
interference th at may cause undesired op eration.
Caution: Th e user is cautioned th at ch anges or modifications not exp ressly ap p rove d b y th e p arty resp onsib le for
comp liance could vo id th e user' s auth ority to op erate th e eq uip ment.
N ote: Th is eq uip ment h as b een tested and found to comp ly with th e limits for a Class B digital devi ce, p ursuant to
p art 15 of th e F CC Rules. Th ese limits are designed to p rovi de reasonab le p rotection against h armful interference
in a residential installation. Th is eq uip ment generates uses and can radiate radio freq uency energy and, if not
installed and used in accordance with th e instructions, may cause h armful interference to radio communications.
Howeve r, th ere is no guarantee th at interference will not occur in a p articular installation. I f th is eq uip ment does
cause h armful interference to radio or televi sion recep tion, wh ich can b e determined b y turning th e eq uip ment off
and on, th e user is encouraged to try to correct th e interference b y one or more of th e following measures:
—R eorient or relocate th e receivi ng antenna.
—I ncrease th e sep aration b etween th e eq uip ment and receive r.
—C onnect th e eq uip ment into an outlet on a circuit different from th at to wh ich th e receive r is connected.
—C onsult th e dealer or an exp erienced radio/ TV tech nician for h elp .
ISED W a r n i n g s t a t e m e n t s
Th is devi ce comp lies with I ndustry Canada’ s licence-exe mp t RS S s. Op eration is sub j ect to th e following two
conditions:
( 1) Th is devi ce may not cause interference; and
( 2 ) Th is devi ce must accep t any interference, including interference th at may cause undesired op eration of th e
devi ce.
Le p ré sent ap p areil est conforme aux CN R d' I ndustrie Canada ap p licab les aux ap p areils radio exe mp ts de
licence. L' exp loitation est autorisé e aux deux conditions suiva ntes : ( 1) l' ap p areil ne doit p as p roduire de
b rouillage, et ( 2 ) l' utilisateur de l' ap p areil doit accep ter tout b rouillage radioé lectriq ue sub i, mê me si le b rouillage
est suscep tib le d' en comp romettre le fonctionnement.

08
Th e air is p urified in  stages:
1. P RE- F ILTER STAGE
2. PROPRIETARY HEP A - Rx F ILTER
3. A C TIV A TED C A RBON F ILTER
4. UV - C + LA M P
5. REV ITA LIZ ING NEGA TIV E ION C HA M BER
HOW IT W ORK S
W h en th e D C fan motor is running, th e indoor air will b e drawn th rough th e b ottom of th e unit. Th e air will th en
p ass th rough th e HE P A-Rx F ilter, th e Activa ted Carb on F ilter, th e U V-C+ . Th e p urified air is th en
released th rough th e outlet on th e top of th e unit. Th e Revi talizi ng N egative I on G enerators near th e air outlet
releases revi talizi ng negative ions into th e air to refresh th e air.

F EA TURES A ND SP EC IF IC A TIONS
       A   EA-R  A C  V-C   
R   
Touch-free hand gesture operation
Th e J AD E 2 .0 can b e op erated comp letely with th e wave of your h and, mak ing it suitab le in medical settings to
avo id cross contamination.
Filters and UV-C+ Lamp Replacement Indicator Lights
Th e indicator ligh ts tell you wh en to rep lace th e HE P A-Rx filter, th e Activa ted carb on filter or th e U V-C+ lamp .
Safety and Easy Maintenance
Th e unit is also eq uip p ed with a safety interlock switch th at will turn th e p ower off if th e b ottom p late is op ened.
W h en th e filters need to b e rep laced, simp ly op en th e b ottom p late and p ull out th e filters and p ut th e new ones in.
N o screws, h ooks or tools are req uired.
Model N o.
P ower Req uirement
Rated P ower
N egativ e I on
U V Lamp
D imensions
W eigh t
J AD E 2 .0 ( S CA5 100C)
12 0V, 60Hz
72 W , 1A
2 x 3x 106/ cm³
10W
31.6cm  H8.5cm (12.4 inches  H35.2 inches )
14.5g (31. pounds)
09

P A RT NA M E
-01
-02
-03
-04
-05
-06
-09
-10
-11
-07
-08
- P article laser sensor
10- HE P A-Rx filter
11- Activa ted carb on filter
1- U V-C+ lamp 
1- V  C
1- U nit lock
15- B ottom p late
01- U nit b ody
02 - U nit h ousing
03- Air outlet
04- F an motor
05 - F an b lade
06- I on generator
07- LE D disp lay
circuit b oard
08- D isp lay p anel
-12
-14
-13
-15
10

INSTA LLA TION
1. P ower sup p ly condition: U se only a 12 0-vo lt outlet with grounding wire recep tacle.
2 . Op erational conditions: Temp erature: 0℃~ 40℃; Relative h umidity: < 75 % .
3. Th e unit sh ould b e installed in an indoor area with less p ersonnel activi ties, and th e unit sh ould b e set up
against th e wall.
4. Th is p roduct is suitab le for indoor air disinfection in h uman envi ronment. I t is strictly p roh ib ited to use in
flammab le, exp losive and oth er gas envi ronment.
Be f o r e o p e r a t i o n
1 Turn unit up side down - p ut towel or any soft p ad on th e ground to avo id damage to th e unit wh en you
turn it up side down.
 Op en unit from th e b ottom - Turn counterclockw ise to op en b ottom.
 After th e p lastic b ottom is remove d, take off th e unit lock.
 Take out th e HE P A-R filter and th e activa ted carb on filter to remove th e p lastic cove r.
5 P ut th e HE P A-R filter and activa ted carb on filter b ack into unit. Align th e b lue arrow with b lue arrow, turn
th e unit lock clockw ise until th e b lue arrow is aligned with th e letter C on th e unit b ottom.
 I nstall th e b ottom p late b y rotating clockw ise th e same with th e S tep 5 .
P rior to using unit for th e first time, you must remove th e p lastic
b ag from th e HE P A and activa ted carb on filter inside th e unit.
C a u t i o n
11

OP ERA TION 1
Ha n d Ge s t u r e Op e r a t i o n
P lug th e p ower cord in
,
th e inner circle will turn b lue, indicating
th e air p urifier is in standb y mode. U se your h and to wave ove r
th e sensor, th is wavi ng motion turns th e unit on & off, and can
also adj ust th e fan sp eed.
LOC K / UNLOC K
Hove r & h old your h and ove r th e sensor for 2 seconds and th is will lock th e
unit at th e desired sp eed. Th is will p reve nt accidental or unwanted sp eed ch anges.
To unlock th is feature, h ove r & h old your h and ove r th e sensor again for 2 seconds.
AUTO
23
S p eed
L
M
H
Turb o
Auto
S tandb y
Circles on th e sensor p anel
B lue circle will turn wh ite
S econd circle will ligh t up
Th ird circle will ligh t up
All th e circles ligh t up wh ite
All th e circles ligh t up wh ite
“ AU TO” indicator will ligh t up
“ AU TO” indicator will ligh t up
I nner circle turns b ack to b lue
I nner circle turns b ack to b lue
W ave
1
st
time
2
nd
time
3
rd
time
4
th
time
5
th
time
6
th
time
12

13
OP ERA TION 2
1 P OW ER Bu t t o n
- W h en th e unit is p lugged into an electrical outlet, th e disp lay p anel
shows the indoor PM2.5 concentration (μg/m³), temperature and
humidity.
P ress th e b utton, turns th e unit On and Off.
- Hold th e b utton for 3 seconds to reset th e filters indicator ligh t.
2 TIM ER Bu t t o n : Press this button to select the time for operation.
The timer setting switches as shown: 2H -- 4H -- 6H -- 8H -- 10H --
12H -- cancel timing.
3 UV - C + LA M P Bu t t o n : W h en th e b utton is p ressed, it will turn off
the UV-C+ lamps, pressing again will turn on the UV-C+ light.
4 NEG. ION Bu t t o n : Turns N egative I ons on and off.
5 NIGHT Bu t t o n : W h en p ressed, all th e indicator ligh ts on th e
disp lay p anel will disap p ear.
6 LOC K In d i c a t o r Li g h t : W h en th e unit is locke d th e indicator ligh t
is on (See page12).
7 P o l l u t a n t l e v e l d i s p l a y
The different colors indicate the air quality level:
B lue= G ood, Orange= Moderate, Red= P oor
Bu t t o n Op e r a t i o n
TVOC
PM2.5
°C %
1 234 5
TVOC
PM2.5
°C
67
If the unit is not operated for one minute,
the UV-C lamp button and NIGHT
button ligh t will go off exce p t th e P OW E R
b utton, entering th e screensaver mode.
N OTE
Control D isp lay P anel
I ndicator Color
B lue
Orange
Red
P M2 .5
≤35μg/m³
36~150μg/m³
>150μg/m³
TVOC Leve l S p eed
L
M
H
~
~

14
8
1
4
5
2
6
TIME
SURGICALLY CLEAN AIR
TM
OP ERA TION 3
Re m o t e C o n t r o l Op e r a t i o n
3
7
1 P OW ER Bu t t o n : Th e unit will start op erating wh en th e P OW E R
b utton is p ressed. P ressing th e b utton again will stop op eration.
2 SP EED Bu t t o n : Th e fan sp eed can b e switch ed among L- M- H-
Turb o- AU TO settings.
3 LOC K Bu t t o n : W h en p ressed, all th e op eration will lock at th e
desired sp eed exce p t th e N I G HT b utton.
4 NIGHT Bu t t o n : W h en p ressed, all th e indicator ligh ts on th e disp lay
p anel will go out.
5 UV - C + LA M P Bu t t o n : Turns U V ligh ts on and off.
6 TIM ER Bu t t o n : Th e set time switch es eve ry time th e b utton is
p ressed as sh own b elow: 2 H - 4H - 6H - 8H - 10H - 12 H - Cancel.
7 NEG. ION Bu t t o n : Turns negative ions on and off.
8 RESET Bu t t o n : P ressing th e reset b utton 3 times will reset th e
rep lacement indicator ligh ts.
RF Remote Control
Be f o r e u s i n g t h e RF r e m o t e c o n t r o l
1. As soon as th e unit is p lugged in, p ress and h old th e
P OW E R b utton on th e remote control for 5 seconds.
2 . Th e indicator ligh t will start flash ing and th is means th e
configuration is succcessful. Th e unit can now b e op erated
with th e remote control.

15
M a i n Un i t
W ip e with a dry, soft cloth for stub b orn stains or dirt. D o not use v o l a t i l e f l u i d s , b e n ze n e , p a i n t t h i n n e r o r
p o l i s h i n g p o w d e r as th is may damage th e surface.
D o not use detergents as detergent ingredients may also damage th e unit. K eep th e unit away from water.
W a r n i n g
1. Turn off and unp lug th e p ower cord b efore cleaning th e b ody, air outlet or op ening th e b ottom to avo id electric
sh ock.
2 . Turn off and unp lug th e p ower cord b efore rep lacement of th e HE P A-Rx F ilter, Activa ted Carb on F ilter and th e
U V-C+ Lamp or unit maintenance. I f th e p ower cord is damaged, it must b e rep laced b y th e servi ce center or a
similarly q ualified p erson.
C A RE A ND M A INTENA NC E 1
To maintain op timum p erformance of th is air p urifier, th e HE P A-Rx F ilter, th e Activa ted Carb on F ilter and th e
U V-C+ Lamp need to b e rep laced wh en th e indicator ligh ts are flash ing. I f th e devi ce is op erating in an
atmosp h ere with h eavy dust, p articulate or p et dander, you may need to p eriodically va cuum th e p re filters for
op timal p erformance.
1 . M a k e s u r e a l l t h e f i l t e r s a r e i n s t a l l e d p r o p e r l y b e f o r e o p e r a t i n g t h e u n i t .
2 . W h e n c o n d u c t i n g m a i n t e n a n c e o n t h e u n i t , b e s u r e t o u n p l u g t h e p o w e r c o r d .
3 . Ne v e r h a n d l e t h e p l u g w i t h w e t h a n d s . If s o , e l e c t r i c a l s h o c k a n d b o d i l y i n j u r y m a y o c c u r a s a r e s u l t .
F i l t e r s Li f e
1. HE P A-Rx F ilter needs to b e rep laced once a year ( running 2 4/ 7) .
2 . Activa ted Carb on F ilter needs to b e rep laced once eve ry 6 month s ( running 2 4/ 7).
3. U V-C+ Lamp needs to b e rep laced once a year ( running 2 4/ 7) .

16
C A RE A ND M A INTENA NC E 2
AUTO
23
S ch ematic diagram of sensor p late p anel on
top of th e unit. After rep lacing th e filters and
U V-C lamp , h old th e P OW E R b utton to
reset th e indicator ligh t.
Th e 3rd circle
flash es, rep lace
th e HE P A-R filter.
Th e 2 nd circle
flash es, rep lace th e
activa ted carb on
filter.
Th e inner circle
flash es, rep lace
th e U V-C lamp .
Re p l a c i n g t h e HEP A - Rx f i l t e r
W h en th e 3rd circle on th e sensor p late flash es, th e
HE P A-Rx filter needs to b e rep laced.
1 S top th e op eration and unp lug th e unit.
 Op en th e b ottom p late, take off th e unit lock.
 Tak e out th e used HE P A-Rx filter and rep lace
with a new one.
 After rep lacing th e HE P A-R filter, h old th e
P OW E R        EA-R

Re p l a c i n g t h e A c t i v a t e d C a r b o n F i l t e r
W h en th e 2 nd circle on th e sensor p late flash es,
th e activa ted carb on filter needs to b e rep laced.
1. S top th e op eration and unp lug th e unit.
2 . Op en th e b ottom p late and take off th e unit lock.
3. Take out th e used activa ted carb on filter and
rep lace with a new one.
4. Op erate th e unit, p ress th e P OW E R b utton for 3
seconds to reset th e life time.

17
C A RE A ND M A INTENA NC E 3
W a r n i n g
D O N OT reuse or clean th e HE P A-Rx filter and th e Activa ted carb on filter.
D O N OT clean th e HE P A-Rx filter, th e Activa ted carb on filter and any oth er p arts with liq uid, esp ecially
alcoh ol, gasoline, p aint th inner, etc. I t may cause fire!
N eve r look directly at U V-C+ lamp . D irect exp osure to th e ligh t can cause temp orary or ch ronic
damage to your eyesigh t, or eve n b lindness.
3. Op erate th e unit, p ress th e P OW E R b utton for 3 seconds to reset th e indicator ligh t.
1. Take out all filters, unscrew th e
V  C b y turning it
counterclockw ise.
2 . U nscrew th e U V lamp h older
b y turning it counterclockw ise.
3. Take out th e U V-C+ lamp
up ward, rep lace th e new
U V lamp
Re p l a c i n g t h e UV - C + La m p
W h en th e inner circle on th e sensor p late flash es, th e U V-C+ lamp needs to b e rep laced ( S ee p age16) .
1. S top th e op eration and unp lug th e unit.
2 . Op en th e b ottom p late and th e unit lock, take out all filters. Rep lace U V-C+ lamp , as sh own b elow:

18
TROUBLESHOOTING
Most servi ce p rob lems th at ap p ear to b e maj or can often b e resolve d easily. Y ou can b e your own
troub lesh ooter b y revi ewing th e following guide. All oth er maj or servi cing sh ould b e done b y a S urgically
Clean Air auth orize d servi ce center.
U V-C+  sh ould only b e p urch ased from S urgically Clean Air or an auth orize d dealer at S urgically Clean
Air. Th is will ensure th at you are receivi ng U V-C+ lamp th at do not generate ozo ne. Many after-marke t sellers
are selling ozo ne-generating U V-C+ lamp .
TO ORD E R F I LTE RS OR U V-C+ LAMP S -
www.surgicallycleanair.com MOD E L: JA D E 2 .0 ( S CA5 100C)
P ower failure?
P ower p lug disconnected?
B ottom p late or interlock
switch failure?
Th ere is too much dust on th e
HE P A-Rx filter or Activa ted carb on filter?
Rep lace th e HE P A-Rx filter or th e
Activa ted carb on filter.
Ch eck oth er electrical ap p liances.
Make sure p lug is fully inserted.
Th e unit does not op erate wh en
th e b ottom p late is detach ed.
I nstall p rop erly. Ch eck interlock switch .
What to check Measure
Th e unit does not op erate
W h en functions do not
work p rop erly
Case

1A - 6300 Viscount Road
Mississauga, Ontario
Canada, L4V 1H3
Tel: [phone]
www.surgicallycleanair.com
[e-mail]
SURGICALLY CLEAN AIR
TM
SCA5100C-REV 1