
ENG
6
Game Racing Wheel
Reassign button function
1. Press SHARE/9/View + OPTIONS/10/Menu, hold for 3 seconds until the green LED lights up.
2. Press the button with the function you want to assign to another button, the green LED will
start ashing.
3. Press the programmable button to which you want to save the new function, the LED switch-
es to red and stops ashing. The function is installed.
Setting the default button function
1. Press SHARE/9/View + OPTIONS/10/Menu, hold for 3 seconds until the green LED lights up.
2. Press the button with the function you want to reset by default, the green LED will start
ashing.
3. Press the same button again. The LED will turn red and stop ashing. The function on thebut-
ton is set by default.
Reset all previously installed settings
1. Press SHARE/9/View + OPTIONS/10/Menu, hold for 3 seconds until the green LED lights up.
2. Press OPTIONS/10/Menu hold for 4 seconds until the red LED lights up.
Attention: By disconnecting the steering wheel from USB, all previously congured steering
functions will be reset by default.
Pedal programming as Y-axis
1. Press SHARE/9/View + OPTIONS/10/Menu, hold for 3 seconds until the green LED lights up.
2. Press LEFT on D-Pad. The LED will turn red and stop ashing. The pedals are programmed
asa function of Y.
Programming paddle shifters L-Wing/brake and R-Wing/Accelerator as Y-axis
1. Press SHARE/9/View + OPTIONS/10/Menu, hold for 3 seconds until the green LED lights up.
2. Press RIGHT on D-Pad. The green LED will turn red and stop ashing. Paddle shifters pro-
grammed as a function of Y.
Adjustable steering sensitivity
The setting allows you to set three levels of sensitivity steering.
1. Press SHARE/9/View + OPTIONS/10/Menu, hold for 3 seconds until the green LED lights up.
2. Press SHARE/9/View once again, the LED ashes, displaying the current sensitivity.
3. Press SHARE/9/View the third time to select the level of sensitivity.
The ashing frequency of the LED indicates the sensitivity level of the steering wheel. Low (green
LED blinks slowly), mid level (LED blinks more often), and high (green LED blinks fast).
4. Press the button UP on D-Pad to conrm the sensitivity setting and exit. The LED will stop
ashing.
9. WHEEL CONNECTING TO DIFFERENT DEVICES
Use of a wheel together with the PS3 console
1. Connect the pedals to the steering wheel, connect the steering wheel to the console using
a USB cable.
2. Power on the console.
3. After the LED turns red, the connection is established. Then the wheel can be congured (see
description above) or start the game.
4. During the game, a short press on the MODE button allows you to enter the XBM window,
along (long hold), allows you to get into the controller's setup menu.
Use of a wheel together with the PS4 console
1. Connect the pedals to the steering wheel, connect the steering wheel to the console using
aUSB cable.