Swegon Parasol VAV User manual

ParasolVAV
Installation – Commissioning – Maintenance 20161026
46.85"
18.42" – 21.53"
Parasol VAV 24 / 24 PF Parasol VAV 48 / 48 PF
23.22"
18.42" – 21.53"
ø2"
0.33"
Installation

Parasol VAV
2
Swegon reserves the right to alter specications 20161026
Parasol VAV 24 / 24 PF
Parasol VAV 48 / 48 PF
Unit A =
Parasol VAV 24 Ø 4.92"
Parasol VAV 24 PF Ø 6.3"
Parasol VAV 48 Ø 4.92"
Parasol VAV 48 PF Ø 6.3"
Ø A
Position of waterpipes
Water
Air
Max. recommended operating pressure: 230 psi
Max. permissible inlet flow temperature: 140°F

Parasol VAV
3
20161026 Swegon reserves the right to alter specications
VAV mounted controls
Wiring
Parasol VAV climate beams require field mounted controls by others. Sensors, valve actuators, damper actuators etc,
can be factory installed and wired to a terminal strip. Refer to submittal for list of factory installed components.
The field mounted controller can be installed
on the long sides of the Parasol Climate beam.
Ensure the control has access for service.
Figure 1- Terminal Strip for Wiring field installed controller to factory
install components

Parasol VAV
4
Swegon reserves the right to alter specications 20161026
ADAPT Parasol Nozzle setting per side Side k-factor
24 L1&3 8.4
24 L2&4 8.4
24 M1&3 14.7
24 M2&4 14.7
24 H1&3 23.1
24 H2&4 23.1
24 PF L1&3 9.4
24 PF L2&4 43.1
24 PF M1&3 14.7
24 PF M2&4 48.5
24 PF H1&3 23.1
24 PF H2&4 56.8
48 L1&3 8.4
48 L2&4 22.1
48 M1&3 14.7
48 M2&4 38.8
48 H1&3 23.1
48 H2&4 60.9
48 PF L 1&3 9.4
48 PF L 2&4 86.6
48 PF M 1&3 14.7
48 PF M 2&4 99.7
48 PF H 1&3 23.1
48 PF H 2&4 118.0
Nozzle configuration
H M L
H =
M=
L=
1 x 8
T-25
pi(1,3)
Water
Air
12
4
3
pi(2,4)
Commissioning
1k (1+3) + pi(1,3) => q (1+3)
The K-factor of the short sides together
with the commissioning pressure reading
of these equals the flow of the short sides,
1&3.
2k (2+4) + pi(2,4) => q (2+4)
The K-factor of the long sides together
with the commissioning pressure reading
of these equals the flow of the long sides,
2 & 4.
3q tot =q (1+3) + q (2+4)
The product's total flow is the sum of the
above.
NB! pi(1,3) = pi(2,4)
NOTE: The commissioning pressure is
different for the long sides (2 & 4) and
the short sides (1 & 3).
Pi=
( )
2[in.wg]
q = k·π [cfm]
q
k

Parasol VAV
5
20161026 Swegon reserves the right to alter specications
Fan-shape
X-shape

Parasol VAV
6
Swegon reserves the right to alter specications 20161026
OPEN THIS SIDE
OPENTHISSIDE
OPENTHISSIDE
3
1
2
4
5
AIR
Maintenance