Swift S7 Series User manual

User Guide: the S7 Stereo Microscope Series

1
Welcome to your Swift S7 Series microscope! Whether you are a seasoned
professional or a beginner hobbyist, Swift has the perfect microscope for you.
This guide will introduce you to the components of your new microscope and help you
begin using it. For more information about our microscopes, software downloads,
product manuals, or customer service requests, please visit www.swiftoptical.com.
Table of Contents
I. Prior to use 2
II. Specifications 2
III. Parts of the microscope 5
IV. Assembling the microscope 11
V. Using the microscope 18
VI. Maintenance and repair 19
VII. Troubleshooting 19
VIII. Warranty information and customer support 21
Ⅸ. Manual and software downloads 21

2
I. Prior to use
Your microscope is a precision instrument that will last you for many years with proper
care and use. Keep these instructions in mind:
1. Store the microscope in a clean and dry place. Keep the microscope out of direct
sunlight. Avoid extreme temperature changes and humidity.
2. Handle with care at all times, avoiding impact or abrupt movement during
transport.
3. For best image clarity, do not leave fingerprints or other markings on any lenses.
4. Never turn the right and left focusing knobs in opposite directions at the same
time. Doing so will damage the microscope.
II. Specifications
The S7 series comes with either a binocular (S7-B) or a trinocular head (S7-T) and is
highly customizable with optional additional eyepieces, objectives, illumination rings,
and stands. The S7-T features a dedicated port for camera attachments. The below
specifications show the standard models and which customizations are available.
S7 Series model specifications
Model Type
S7-B
S7-T
Optical system
Greenough
Observation angle
45°
Interpupillary
adjustment
54- 76 mm
Objective (standard
model)
0.7X—4.5X
Zoom ratio
1:6.4
Eyepieces
WF10X/20mm, standard

3
Diopter adjustment
On left and right tubes, +/-5
Magnification range
(standard model)
7X-45X
Focusing travel range
50mm
Working distance
(standard)
100mm
C-mount adapter
--
Trinocular head only
--
0.5X, 1X adapters available
Available additional
auxiliary objectives
0.5X (WD = 165mm)
2.0X (WD = 30mm)
Illumination options
56-bulb LED ring light, 6000-7000K, 100-240V
144-bulb LED ring light, 6000-7000K, 100-240V
Stand options
Plain stand
Single-arm boom stand
Dual-arm boom stand
S7 Series optics specifications
Eyepiece
Standard
configuration
Optional auxiliary objectives
0.5X
2X
WD 100mm
WD 165mm
WD 30mm
Mag.
FOV (mm)
Mag.
FOV (mm)
Mag.
FOV (mm)

4
10X
(20mm)
7X
28.6
3.5X
57.1
14X
14.3
45X
4.4
22.5X
8.9
90X
2.2
15X
(15mm)
10.5X
21.4
5.25X
42.8
21X
10.7
67.5X
3.3
33.75X
6.7
135X
1.7
20X/10
14X
14.3
7X
28.6
28X
7.1
90X
2.2
45X
4.4
180X
1.1
Abbreviations:
WD = Working distance
Mag = Magnification
FOV = Field of view

5
III. Parts of the microscope
The below diagrams show the various available stand configurations for the S7
binocular and trinocular head models.
The S7-B with plain stand:
Fig.1

6
The S7-T with plain stand:
Fig.2

7
The S7-B with single-arm boom stand:
Fig.3

8
The S7-T with single-arm boom stand:
Fig.4

9
The S7-B with dual-arm boom stand:
Fig.5