Swing Set Stuff SSS-0073 User manual

Installation Guide
2 Person Glider Seat Only (SSS-0073)
Part List
Tools Gloves
Finish Plan
Finish Plan
X 2X 2 X 1
Safety Glasses
1. Line up the holes of
the Seat with the
holes of the Handle
Assemblies. Insert the Eye Bolt of
the Chain through the
hole in the Handle
Assembly.
2. Repeat the step 1
to complete the other
side of the Handle
Assemblies.
Ratchet
By accepting this product you are agreeing to Swing Set Stuff Inc.’s terms and conditions. You can review the terms and conditions at www.swingsetstuff.com/terms-conditions/
Product Instructions are provided by the manufacturer for the convenience of the customer. Swing Set Stuff Inc. does not make any representations or warranties about any product instructions that may be included
in customer’s shipment or downloaded from Swing Set Stuff Inc.’s website. Any such product instruction is made available independent of Swing Set Stuff Inc. A copy of the product instructions can be found on
www.swingsetstuff.com/product-instructions/.
1
2
Recommended accessories
Installation location
Chains X4 Chains wiith Rope X4
(These items sold separately)

Finish Plan
Part List
SSS-0073 X 1
By accepting this product you are agreeing to Swing Set Stuff Inc.’s terms and conditions. You can review the terms and conditions at www.swingsetstuff.com/terms-conditions/
Product Instructions are provided by the manufacturer for the convenience of the customer. Swing Set Stuff Inc. does not make any representations or warranties about any product instructions that may be included
in customer’s shipment or downloaded from Swing Set Stuff Inc.’s website. Any such product instruction is made available independent of Swing Set Stuff Inc. A copy of the product instructions can be found on
www.swingsetstuff.com/product-instructions/.
Assembly of Glider Seat - adding Chain
1. Attach chain with S
hook to the swing
hangers.
2. Use the Bender
Tool to bend the S
hook completly. All
S-hooks must be bent
fully closed.
3. Repeat the Step 1
& 2 to connect all 4
Chains into the Glider
Bracket.
1
2
3NOTE：Before connecting the
S hook with the chains onto the Glider
Bracket please make sure the glider bracket is attached to the swing beam.
Recommended
accessories
Option 1
S-hooks or
Spring Clips
for optional.
Tools
SSS-0113-P X 1
SSS-0376 X 4
Bender Tool Gloves
Safety Glasses
X 4
OR
X 4

Finish Plan
NOTE：Before connecting the S hook with the chains onto the Glider
Bracket please make sure the glider bracket is attached to the swing beam.
1. Attach chain with S
hook to the swing
hangers.
2. Use the Bender
Tool to bend the S
hook completly. All
S-hooks must be bent
fully closed.
3. Repeat the Step 1
& 2 to connect all 4
Chains into the Glider
Bracket.
By accepting this product you are agreeing to Swing Set Stuff Inc.’s terms and conditions. You can review the terms and conditions at www.swingsetstuff.com/terms-conditions/
Product Instructions are provided by the manufacturer for the convenience of the customer. Swing Set Stuff Inc. does not make any representations or warranties about any product instructions that may be included
in customer’s shipment or downloaded from Swing Set Stuff Inc.’s website. Any such product instruction is made available independent of Swing Set Stuff Inc. A copy of the product instructions can be found on
www.swingsetstuff.com/product-instructions/.
1
2
3
Option 2
Assembly of Glider Seat - adding Rope/Chain
S-hooks or
Spring Clips
for optional.
Part List
SSS-0073 X 1
Recommended
accessories
Tools
SSS-0113-P X 1
SSS-0376 X 4
X 4
OR
X 4
Bender Tool Gloves
Safety Glasses