Swordfish 1500XXCD User manual

Operating Instructions
Bedienungsanleitung
Mode d’emploi
Istruzioni per l’uso
Instrucciones de funcionamiento
Instructies
15-Sheet Micro Cut Shredder 1500XXCD
Swordsh (UK) Ltd.
London, England
www.swordshuk.com
15
MAXIMUM CAPACITY 15 SHEETS
DO NOT OVERLOAD
CD/DVD/credit card feed slot
max.1 unit per go
CD/DVD/credit card
safety cover
Indicator Panel Power Cord Inlet Power On/O
Operation Buttons:
Reverse Auto-On
O Forward
Warning Panel:
Keep all loose objects
away from opening
Do not place ngers
too close to the feed slot
Do not shred paperclips
Shredder must be
oiled regularly
Feed slot max. 15 sheets
up to A4
Rev
O
On
Fwd
For further technical advice:
Email: service@swordshuk.com
Fax : [phone]
Web: www.swordshuk.com

Capacity
This Swordsh shredder will shred:
• upto15sheetsof80gsmpaperper
pass, with a max width of 220mm
• staples
• singlecreditcards
• singleCDsandDVDs
This Swordsh shredder will not shred:
• paperclips
• adhesivelabels
• cardboard
• newspaper
• plasticorlaminates
Installation
• Ensurethewastebinissecurelyinplaceandthedoorisclosed.
• Connecttheelectricityplugtoanystandardpowersocket.
Operation
Micro Cut 1500XXCD
MAXIMUM CAPACITY15 SHEETS
DO NOTOVERLOAD
Rev
Off
On
Fwd
15
Micro Cut 1500XXCD
MAXIMUM CAPACITY15 SHEETS
DO NOTOVERLOAD
Rev
Off
On
Fwd
15
Micro Cut 1500XXCD
MAXIMUM CAPACITY15 SHEETS
DO NOTOVERLOAD
Rev
Off
On
Fwd
15
Micro Cut 1500XXCD
MAXIMUM CAPACITY15 SHEETS
DO NOTOVERLOAD
Rev
Off
On
Fwd
15
Micro Cut 1500XXCD
MAXIMUM CAPACITY15 SHEETS
DO NOTOVERLOAD
Rev
Off
On
Fwd
15
1
Switch the Power On.
1
1
2
2
3
Push the safety cover to
reveal the paper feed slot.
Insert paper into the feed
slot.
When nished, push to
release and close the safety
cover.
Ensure the safety cover is
closed.
Insert the CDs/DVDs/Credit
Cards one at a time.
• When switched on, the shredder is automatically started by inserting paper into the feed slot.
For CDs, DVDs and Credit Cards:
Troubleshooting
1Bin Open
• Check the bin is in place and the door is closed.
2Paper Jam
• Important! Empty the waste bin if necessary.
Rev
Off
On
Fwd
Rev
Off
On
Fwd
Rev
Off
On
Fwd
Rev
Off
On
Fwd
Micro Cut 1500XXCD
MAXIMUM CAPACITY15 SHEETS
DO NOT OVERLOAD
Rev
Off
On
Fwd
15
Set to ‘Fwd’
for 2-3
seconds.
Set to ‘Rev’
and ‘On’
alternately.
Set to ‘O’. Gently pull any excess paper
from the feed slot.
Set to ‘Rev’
for 2-3
seconds.
3Overheating
• Switch the Power O, unplug and leave to cool for 30 minutes.
4Bin Full
• Open the door.
• Pull out the waste bin and empty
• Replace the bin and close the door.
For Paper:
Maintenance
Oiling is an essential part of shredder maintenance and is therefore necessary in order to
maintain warranty coverage.
Important!
• Only use a non-aerosol, oil that is specically designed for paper shredders.
• Switch the Power O, unplug and leave to cool for 30 minutes.
Rev
Off
On
Fwd
Rev
Off
On
Fwd
Rev
Off
On
Fwd
Micro Cut 1500XXCD
MAXIMUM CAPACITY15 SHEETS
DONOT OVERLOAD
Rev
Off
On
Fwd
15
Micro Cut 1500XXCD
MAXIMUM CAPACITY15 SHEETS
DONOT OVERLOAD
Rev
Off
On
Fwd
15
Set to ‘O’. Apply oil through the
feed entry.
Set to ‘On’. Shred one sheet of paper. Set to ‘Rev’
for 2-3
seconds.
Rev
Off
On
Fwd
Rev
Off
On
Fwd
2
Set to ‘On’.
Rev
Off
On
Fwd
Rev
Off
On
Fwd
1
Set to ‘O’.
2
Switch the Power O.
Before Shredding: After Shredding: