SyberSense XPG01-E-1433-00 User manual

XPG01-E-1433-00Glass break Sensor Manual
XPG01 ID :
Part number:
Glass break Sensor, White (XPG01-E-1433-00)
Features
•Sensor detects the sound of breaking glass.
• 360°Omni-directional coverage.
• Enrollment Button: Only used for enrolling.
• Strong, reliable RF signal.
• 2-4 year battery life on CR2477H battery.
• Low Battery indication.
Key Instructions
• Mount sensor at least 3.3 ft from desired protected window
(Max 25 ft)
• Needs to be in line of sight of window being protected (avoid
corners and doors blocking the sensor)
Operation
• Sensor detects glass breaking from framed windows,
and sends alarm to control panel
• Supervises: every hour ( if activated)

Specifications
FCC compliance
FCC ID: 2AVDCXPG01-E-1433
This device complies with Part 15 of the FCC Rules. Operation
is subject to the following two conditions: (1) this device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
Note: This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to Part 15
of the FCC Rules.
These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications.
However, there is no guarantee that interference will not occur
in a particular installation.
If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the
equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
-- Reorient or relocate the receiving antenna.
-- Increase the separation between the equipment and receiver.
-- Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
-- Consult the dealer or an experienced radio/TV

technician for help.
Warning: changes or modifications not expressly approved by
the party responsible for compliance could void the user’s
authority to operate the equipment.
This equipment complies with FCC radiation exposure limits
set forth for an uncontrolled environment. This transmitter must
not be co- located or operating in conjunction with any other
antenna or transmitter.